Differences

This shows you the differences between two versions of the page.

--- new-install [2022/03/22 20:42] – [Magic Lantern Installation] Walter Schulz
+++ new-install [2022/04/01 16:40] – fix images, and a few misc formatting changes petabyte
@@ Line 23: / Line 23: @@
 {{:new-install:mlinstall_1.png?direct|}}
-On first run on Windows, it should not work.
+On first run on Windows, it should **not** work.
 Here’s what to do:
   - Download and run [[https://zadig.akeo.ie/|Zadig]].
-  - In order to revert this change, simply repeat the steps and choose “WinUSB” instead of “libusb-win32”.
+  - On the Canon Camera device, replace "WinUSB" with "libusb-win32" as in this GIF: [[https://github.com/petabyt/mlinstall/blob/master/assets/zadig.gif]]
-  - Some Windows software may fail to work if this change is not reverted.
+  - //In order to revert this change, simply repeat the steps and choose “WinUSB” instead of “libusb-win32”. Some Windows software may fail to work if this change is not reverted. //
-  - Once you have verified that USB communication is working, click “Enable Boot Disk”. In order to revert the camera to factory settings, click “Disable Boot Disk”.
+  - Once you have verified that USB communication is working, click “Enable Boot Disk”.
+  - //In order to revert the camera to factory settings, click “Disable Boot Disk”.//
-{{:new-install:mlinstall_1.png?direct|}}
+{{:new-install:mlinstall_2.png?direct|}}
-  - Unplug the SD card from the camera.
+  - Unplug the camera SD card from the camera.
-  - Insert the SD card into your computer. You might need an adapter.
+  - Insert the camera SD card into your computer. You might need an adapter.
-  - Ensure that your SD card is named “EOS_DIGITAL”. mlinstall searches for any storage device named “EOS_DIGITAL” and writes to the first one it finds.
+  - Ensure that your SD card is named “EOS_DIGITAL”. mlinstall searches for a storage device named “EOS_DIGITAL” and writes to the first one it finds.
   - In mlinstall, navigate to the “Card” tab and click “Write card boot flags”. This will write data to the SD card. It’s a good idea to format the card in the camera first.
 In Linux, eject the card before removing it.
-Note: mlinstall currently doesn’t support ExFAT, so you might want to use EOSCard.
+//Note: mlinstall currently doesn’t support ExFAT, so you might want to use EOSCard.//
@@ Line 55: / Line 56: @@
   - Insert SD Card into camera and turn it on. On first startup, ROM1 and ROM0 will be backed up. In the picture settings screen in MANUAL mode, press the Q button (or DELETE/TRASH button).
 ====== Uninstalling Magic Lantern ======
@@ Line 62: / Line 61: @@
   - Run mlinstall again and click “Disable Boot Disk”.
-Note that mlinstall has a “Destroy Card Boot Flags” feature that can make the SD Card non-bootable. After you run it, you will not need to format your card afterwards.
+//Note that mlinstall has a “Destroy Card Boot Flags” feature that can make the SD Card non-bootable. (revert it to normal setting) After you run it, you will not need to format your card afterwards.//
 ====== Troubleshooting, 1300D/Rebel T6 ======
 critix: “Try to do a firmware update to version 1.1.0. (even if you have exactly this version on your device). Then you can try to test ML. This problem seems to exist on many devices. I suffered the same with my device. After an "update" to version 1.1.0, I was able to work on ML.”