Differences

This shows you the differences between two versions of the page.

--- new-install [2023/10/30 01:17] – Remove old info, update for Oct 2023 petabyte
+++ new-install [2024/01/17 18:10] (current) – [Install] petabyte
@@ Line 32: / Line 32: @@
   - Insert the camera SD card into your computer. You might need an adapter.
   - Ensure that your SD card is named “EOS_DIGITAL”. MLinstall searches for a storage device named “EOS_DIGITAL” and alters the first one it finds.
-  - In MLinstall, navigate to the “Card” tab and click “Write card boot flags”. This will write data to the SD card. It’s a good idea to format the card in the camera first.
+  - In MLinstall, navigate to the “Card” tab and click “Write card boot flags”. This will write data to the SD card. It’s a good idea to format the card in the camera first, but it's not required.
-  - //In Linux, eject the card before removing it.//
 {{:new-install:mlinstall_3.png?direct|}}
@@ Line 40: / Line 39: @@
   - Also you need to ensure the both the firmware version and the [[internal build version]] are the same as what the build requires.
   - Extract the Magic Lantern release zip file contents onto the SD card. Make sure that “autoexec.bin” and the "ML" folder are at the top directory, alongside DCIM.
-TODO: Eventually MLinstall will show the [[internal build version]]. For now... just cross your fingers.
 And finally:
-  - Insert SD Card into camera and turn it on. On first startup, ROM1 and ROM0 will be backed up. If not, you should do that through the Magic Lantern menus. In the picture settings screen in MANUAL mode, press the Q button (or DELETE/TRASH button).
+  - Insert SD Card into camera and turn it on. On first startup, ROM1 and ROM0 will be backed up. If not, you should do that through the Magic Lantern menu (Debug > Dump ROM and RAM). In the picture settings screen in MANUAL mode, press the Q button (or DELETE/TRASH button).
 ====== Uninstalling Magic Lantern ======