Magic Lantern wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Porting guide ======

An attempt to create a high-level guide for how to port Magic Lantern to a new camera.

It's very important to note that at present, this guide is written by two people in the process of doing a new port (200D and RP specifically).  We don't know (much of) what we're doing.  That's the point - if you want to start a new port, you don't know what you're doing, either.  But at present, it means these are going to be messy, confusing docs.

===== Requirements to get started =====

  * An unsupported cam (link to supported cams should go here)
  * A dev environment and ability to build ML (link to page holding links to how to setup source download and build (these pages already exist on wiki I think).  Probably Qemu setup linked from here also?  It's a soft req, you could in theory do without it...)
  * Reverse engineering tools (link to page holding links to recommended tools / tool categories.  Prefer open / free tools where possible, documenting closed tools is less useful)

===== Porting process overview =====

  * Understanding ML (source tree structure, build process, high-level overview of boot process)
  * Early steps (link to page with: dump rom, Ghidra project setup, creating platform/XXD for a new cam)
  * Getting code running (don't know how to write this.  Explain that this is already done for most/all D45678X cams and what this implies)
  * Showing something on the screen
  * Logging from the cam
  * ... (digic-explorer?  CONFIG_HELLO_WORLD build?  Then what?)