Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | Next revisionBoth sides next revision |
| install [2021/04/11 09:54] – Bitbucket -> Heptapod Walter Schulz | install [2021/04/11 10:39] – [Important notes] Removed "must use plain" because outdated. Added SD-to-CF disclaimer. Walter Schulz |
|---|
| |
| * <color red>**After opening the card door, always wait for LED confirmation (or for 5 seconds) before removing the card!!!**</color> | * <color red>**After opening the card door, always wait for LED confirmation (or for 5 seconds) before removing the card!!!**</color> |
| * **[[http://www.flickr.com/groups/magiclanternfirmware/discuss/72157627990119618/#comment72157627879367185|EyeFi cards may not work]];** you must use plain SD / SDHC / SDXC / CF cards. | * **[[http://www.flickr.com/groups/magiclanternfirmware/discuss/72157627990119618/#comment72157627879367185|Early generation EyeFi cards may not work]]**; other WiFi cards may work properly. |
| | * SD-to-CF adapters are not supported! |
| * If you have a bootable card and have the ''BOOTDISK'' flag set in the camera (which the installer does), and you do not have an ''AUTOEXEC.BIN'' file on the card, the camera **WILL NOT BOOT!** It will hang and not wake up until the battery is removed. | * If you have a bootable card and have the ''BOOTDISK'' flag set in the camera (which the installer does), and you do not have an ''AUTOEXEC.BIN'' file on the card, the camera **WILL NOT BOOT!** It will hang and not wake up until the battery is removed. |
| * If you encounter a "locked up" camera, **quickly remove the battery**. | * If you encounter a "locked up" camera, **quickly remove the battery**. |
