Differences

This shows you the differences between two versions of the page.

--- camera_help_cc [2020/12/24 03:08] – Walter Schulz
+++ camera_help_cc [2021/01/10 20:54] (current) – Walter Schulz
@@ Line 31: / Line 31: @@
 > Special task: HDR section! If you have experience with HDR workflow, preferable with Open-Source tools (but not restricted to), any input would be appreciated!\\
 >And what is the difference between Luma and Luma Fast?
 ====== Audio ======
@@ Line 228: / Line 227: @@
 either 24fps or 30fps depending on the FPS setting in canon menu. It is
 not possible to playback mlv sound in-camera.
@@ Line 265: / Line 265: @@
 Blue-Amber white balance shift. 1 unit = 5 mireks on Kelvin axis, according to [[http://www.openphotographyforums.com/forums/archive/index.php/t-5450.html|this post]].
-> ==== Custom RGB multipliers: ====
+>==== Custom RGB multipliers: ====
 > Fine-tune custom white balance.
@@ Line 735: / Line 735: @@
   * Fine details
-> ====Display type:====
+>====Display type:====
 >  * Blinking dots
 >  * Fine dots
@@ Line 1182: / Line 1182: @@
 > incomplete
-> ====Absolute Zero Sharpness====
+>====Absolute Zero Sharpness====
 > Disables any kind of sharpening.
-> ====Edge Emphasis====
+>====Edge Emphasis====
 > Picks out edges in bright areas.
-> ====Noise Reduction====
+>====Noise Reduction====
 > In camera noise reduction.
-> ===== Creative Effects ===== (Obsolete?)
+>===== Creative Effects ===== (Obsolete?)
-> Custom image effects found by investigating DIGIC registers.
+>Custom image effects found by investigating DIGIC registers.
 > //Submenu options://
-> ====Desaturate====
+>====Desaturate====
 > lets you record grayscale with any picture style.
-> ====Negative image====
+>====Negative image====
 > Inverts your luma values
-> ====Swap U-V====
+>====Swap U-V====
 > Red becomes blue.
-> ====Cartoon look====
+>====Cartoon look====
 > for this to work, set sharpness in your picture style to any nonzero value.
@@ Line 1540: / Line 1540: @@
 //Submenu options://
-  === Enabled ===
+=== Enabled ===
   OFF, ON
-  === Use Global Time ===
+=== Use Global Time ===
   OFF, ON
-  === Loop After ===
+=== Loop After ===
   OFF, 1 - 5000
-  === External Source ===
+=== External Source ===
   OFF, ON
-  === List Keyframes ===
+=== List Keyframes ===
-  ===Save Keyframes ===
+===Save Keyframes ===
-  ===Clear Keyfames ===
+===Clear Keyfames ===
-  === New Keyframe ===
+=== New Keyframe ===
@@ Line 2425: / Line 2425: @@
 //Submenu options://
-====Play mode actions==== When you press associated "Trigger key(s)" (see below), ML may perform one of these functions:
+====Play mode actions====
+When you press associated "Trigger key(s)" (see below), ML may perform one of these functions:
 //Submenu options://
-  ===Action type===
+===Action type===
@@ Line 2540: / Line 2541: @@
-  ===== Misc key settings =====
+===== Misc key settings =====
 //Submenu options://
@@ Line 2981: / Line 2982: @@
 //Submenu options://
-**Disable all modules**
+====Disable all modules====
-**Load modules after crash**
+====Load modules after crash====
 By default (OFF) ML modules will not be loaded after a crash or after battery pull during operation. Users and developers may find setting OFF helpful to identify and disable misbehaving modules in the field.
 For unattended cameras in remote locations setting "Load modules after crash ON" might be preferable esp. if used together with some kind of watchdog timer or otherwise intermittent power source. Same for situations under stress where having time for troubleshooting is not an option.
-**Show console**
+====Show console====
 ===== Benchmarks =====
@@ Line 3002: / Line 3003: @@
 //Submenu options://
-**Card benchmarks**
+====Card benchmarks====
-    * Quick R/W benchmark (1 min)
+=== Quick R/W benchmark (1 min)===
       To determine read and write performance of your card/camera combination.
@@ Line 3026: / Line 3027: @@
-    * Buffer R/W benchmark (5 min)
+=== Buffer R/W benchmark (5 min) ===
-    * Buffer write benchmark (inf)
+=== Buffer write benchmark (inf) ===
-**Memory benchmarks**
+====Memory benchmarks====
-   * Memory benchmark (1 min)
+=== Memory benchmark (1 min)===
-   * Cache benchmark (RAM)
+=== Cache benchmark (RAM)===
-   * Cache benchmark (RAM, no cache)
+=== Cache benchmark (RAM, no cache)===
-   * Cache benchmark (ROM)
+=== Cache benchmark (ROM)===
-**Misc benchmarks**
+====Misc benchmarks====
-    * Focus peaking benchmark (30s)
+=== Focus peaking benchmark (30s)===
-    * Menu benchmark (10s)
+=== Menu benchmark (10s)===
 ===== EDMAC tools =====
-**Show EDMAC channels**
+====Show EDMAC channels====
-**Find free EDMAC channels**
+====Find free EDMAC channels====
-**Log EDMAC activity**
+====Log EDMAC activity====
-    * Start logging
+===Start logging===
-    * Log every
+===Log every===
-**EDMAC model test**
+====EDMAC model test====
 ===== File Manager =====
@@ Line 3070: / Line 3071: @@
 Only visible (together with "Fault emulation") after loading selftest.mo in Modules tab.
-**Stubs API test**
+====Stubs API test====
-**RPC reliability tests (infinite)**
+====RPC reliability tests (infinite)====
-**Quick test (around 15 min)**
+====Quick test (around 15 min)====
-**Random tests (infinte loop)**
+====Random tests (infinte loop)====
-**Menu backend test (infinite)**
+====Menu backend test (infinite)====
-**Redraw test (infinite)**
+====Redraw test (infinite)====
-**Rectangle test (infinite)**
+====Rectangle test (infinite)====
-**SRM memory test (5 minutes)**
+====SRM memory test (5 minutes)====
-**Small-block malloc test (quick)**
+====Small-block malloc test (quick)====
-**Memory leak test (1 minute)**
+====Memory leak test (1 minute)====
-**EDMAC screen test (infinite)**
+====EDMAC screen test (infinite)====
@@ Line 3097: / Line 3098: @@
 Only visible (together with "Self tests") after loading selftest.mo in Modules tab.
-**Create a stuck task**
+====Create a stuck task====
-**Freeze the GUI task**
+====Freeze the GUI task====
-**Lock-up the ARM CPU**
+====Lock-up the ARM CPU====
-**Division by zero**
+====Division by zero====
-**AllocateMemory 1MB**
+====AllocateMemory 1MB====
-**Allocate 10MB of RAM**
+====Allocate 10MB of RAM====
 ===== Lens info =====