Differences

This shows you the differences between two versions of the page.

--- camera_help_cc [2020/12/22 15:57] – Walter Schulz
+++ camera_help_cc [2021/01/10 20:53] – old revision restored (2021/01/10 20:48) Walter Schulz
@@ Line 31: / Line 31: @@
 > Special task: HDR section! If you have experience with HDR workflow, preferable with Open-Source tools (but not restricted to), any input would be appreciated!\\
 >And what is the difference between Luma and Luma Fast?
-====== Audio ======
-> Complete (18.02.2019). No pics for plugs, etc. here, because it's in-camera help and drawings for soldering doesn't help that much in this respect, IMO.
-> And if Audio screen isn't visible this help text won't be able to tell users why. That's one reason I opted for this screen to be visible at all times.
-Manual audio controls.\\ If you do not see this screen check these conditions:
-  * 50D: Nope, no way to make it happen! 50D doesn't support audio recording.
-  * Your cam may have restricted audio menu after loading module MLV_SND.mo:\\ 1100D, 650D, 6D, 700D, EOS M, 100D, 70D, EOS M2, 1200D\\ The only menu option you will see with MLV_SND active:\\ - MLV Sound
-The options available differ a lot depending on your camera type.\\ Please check [[https://builds.magiclantern.fm/features.html#Audio|feature matrix]]
-===== Analog Gain =====
-Gain applied to both inputs in the analog domain. Default is on and 23 dB.
-//Values://
-**0**-32 **dB** (values: 0, 10, 17-32 in 3 dB steps)
-Analog does a great job of boosting the signal while retaining a low noise
-floor and hence, [[http://www.magiclantern.fm/forum/index.php?topic=8549.0|dynamic range.]] If you use an
-external preamp, set this parameter as low as possible otherwise, set it
-as high as possible without [[http://www.magiclantern.fm/forum/index.php?topic=11063.0|clipping]] (audio meters
-should be green).
-===== Digital Gain =====
-In-camera digital gain. Default is 0, 0, OFF
-//Submenu options://
-==== Left Digital Gain ====
-to 36 dB
-==== Right Digital Gain ====
-to 36 dB
-==== AGC ====
-**OFF**/ON
-Applying digital gain in-camera is not recommended as any non-zero value reduces
-audio quality and you can achieve the same effect with more control in
-post, but it can serve as an evaluative tool on set. You can apply
-digital gain in 6dB increments to the left and right channel
-independently. AGC is auto mode and is applied only in digital domain.
-It overrides digital gains, but you can still adjust analog gain.
-===== Input source =====
-Mic configurations.
-//Values://
-**Internal mic** your camera's internal mic(s)
-**L:int R:ext**
-**External stereo**
-**L:int R:balanced** (internal mic on Left, external mic on Right from both external pins as balanced audio)
-**Auto int/ext** camera detects if a mic is plugged in. Int is dual mono, ext is stereo.
-Balanced audio allows for very long cable runs without interference. Usually
-balanced mics have three pin XLR connectors and it is very easy to put
-together an XLR to Canon mic input cable. Balanced allows us to use such
-pro mics with our little Canons and this is a very welcome surprise for
-audio guys. You can feed an [[http://www.magiclantern.fm/forum/index.php?topic=1944.0|external audio source]] into the
-camera giving you the option of using higher quality mics, although this
-is not [[http://www.magiclantern.fm/forum/index.php?topic=8836.0|straight forward.]]
-===== Wind Filter =====
-Digital high-pass filter.
-//Values://
-**On or Off**
-Canon's audio controls have no effect, they are completely overriden by ML and
-the wind filter has been known to mute external mics, so if you're
-having that problem on an earlier build turn it off. [[http://www.magiclantern.fm/forum/index.php?topic=4234.msg27693#msg27693|To use or not?]]
-Also see [[http://www.akm.com/akm/en/file/datasheet/AK4646EN.pdf|AK4646 datasheet p.34.]]
-===== Mic Power =====
-Power for mics.
-//Values://
-**ON** input impedance is 2 kOhm.
-**OFF** input impedance is 30 kOhm.
-Required for internal mic and certain types of external mics, but it reduces
-input impedance. This setting is always ON when input source is either
-internal mic or L:int R:ext. See[[http://www.akm.com/akm/en/file/datasheet/AK4646EN.pdf| AK4646 datasheet p.31.]] and the Mic
-power control thread. [[http://www.magiclantern.fm/forum/index.php?topic=2666.0|Results of audio tests with ML and Canon 550D, T2i.]]
-===== Headphone Mon. =====
-Audio monitoring with headphones, using the A/V cable.
-//Values://
-**On or Off**
-To use audio monitoring, you need a special cable: your Canon A/V cable
-with a RCA - 3.5mm jack adapter a dedicated cable from Sescom or you may
-solder it yourself (you will have to cut your A/V cable). Mobile phone
-cables will not work; even if the connector looks similar, it's not
-identical. You must use the original cable which came with your camera.
-For details, see Audio monitoring HOWTO on Vimeo group. Disable this
-setting if you are using a SD monitor. This feature is not available on
-D/T3i.
-Tip: Before cuting/soldering or ordering a monitoring cable check [[https://builds.magiclantern.fm/features.html#Audio|feature matrix]] if this feature is available for your cam at all.
-===== Headphone volume =====
-Digital output gain for audio monitoring.
-//Values://
-**0-6 dB** in 2 dB increments.
-It does not have any effect on the internal camera speaker. For best
-results, you should a pair of low impedance headphones, for example
-Audio Technica ATH-M50 (38 ohms). With high-impedance headphones, you
-may have to use a headphone amplifier like FiiO E5.
-===== Audio Meters =====
-Display the input audio level.
-//Values://
-From -40dB to 0dB, meters become yellow at -12 dB and red at -3 dB. Audio meters are only displayed in movie mode.
-===== Speaker Volume =====
-In-camera speaker.
-//Values://
-**1 to 5**
-===== Beep, test tones =====
-Customize camera sounds.
-//Submenu options://
-==== Enable Beeps ====
-ML uses beep tones for several events. Turn them off if you have to go silent.
-==== Tone Waveform ====
-Sine tones of lower frequency might be not audible on the internal speaker. Use square. Always check with Test beep sound.
-==== Tone Frequency ====
-Default is 1 kHz. Range from 55 Hz (A1) to 12 kHz. Human ears are considered to be most sensitive between 2 and 5 kHz.
-==== Play test tone ====
-==== Test beep sound ====
-===== MLV Sound ======
-Only available when the [[#mlv_sndmo|MLV_SND]] module is loaded and active. See
-[[#modules|Modules]]
-//Submenu options://
-==== Sampling rate ====
-- 48kHz the basic quality of your audio, the higher the better.
-==== Trace output ====
-ON or OFF
-When MLV Sound is ON, a separate WAV file is generated at the framerate
-determined by your FPS setting in Canon Menu. When FPS Override is used,
-only the framerate of raw video is affected, the WAV file will remain
-either 24fps or 30fps depending on the FPS setting in canon menu. It is
-not possible to playback mlv sound in-camera.
@@ Line 265: / Line 67: @@
 Blue-Amber white balance shift. 1 unit = 5 mireks on Kelvin axis, according to [[http://www.openphotographyforums.com/forums/archive/index.php/t-5450.html|this post]].
-> ==== Custom RGB multipliers: ====
+>==== Custom RGB multipliers: ====
 > Fine-tune custom white balance.
@@ Line 660: / Line 462: @@
-==== Global Draw ====
+===== Global Draw =====
 Choose when to enable Magic Lantern overlay graphics such as zebras,
 cropmarks, histograms, audio meters and other ML shooting info.
-//Submenu options://
+//Values://
 **OFF**
@@ Line 680: / Line 482: @@
 - Display screen -> Clear overlays
 - If MLV_REC module is used there is an option "Global Draw" and default is OFF! Computing overlays will reduce cam's storage interface write rate.
-==== Zebras ====
+===== Zebras =====
 Enable/disable zebra stripes, which indicate overexposed or underexposed areas.
@@ Line 686: / Line 488: @@
 //Submenu options://
-**Color Space:**
+====Color Space:====
   * Luma: zebras are computed from Y channel only.
   * RGB: check overexposure for each RGB channel. Clipped channels are displayed in the opposite color (i.e. clipped red shown as cyan, underexposed as  white and so on).
@@ Line 694: / Line 496: @@
 Color Space settings apply to JPG/H.264 only. RAW is not affected.\\
-**Underexposure** - JPG only.  Set the RGB point where underexposure zebras are displayed.
+====Underexposure====
+- JPG only.  Set the RGB point where underexposure zebras are displayed.
-**Overexposure** - JPG only.  Set the RGB point where overexposure zebras are displayed.
+====Overexposure====
+- JPG only.  Set the RGB point where overexposure zebras are displayed.
-**When recording** - Show or hide zebras while recording.
+====When recording====
+- Show or hide zebras while recording.
-**Use RAW zebras** - Enable raw based zebras.  This uses the raw sensor data for zebras.
+====Use RAW zebras====
+- Enable raw based zebras.  This uses the raw sensor data for zebras.
   * Off - Disable raw zebras.
@@ Line 706: / Line 512: @@
   * Photo only - Only show raw zebras in image review.
-**Raw zebra underexposure**
+====Raw zebra underexposure====
   * OFF - 0EV <> +4EV
@@ Line 720: / Line 526: @@
-==== Focus Peak ====
+===== Focus Peak =====
 Focus assist function.
@@ Line 726: / Line 532: @@
 //Submenu options://
-**Filter bias:**
+====Filter bias:====
   * Strong edges
   * Balanced
   * Fine details
-**Display type:**
+>====Display type:====
-  * Blinking dots
+>  * Blinking dots
-  * Fine dots
+>  * Fine dots
-  * Alpha blend
+>  * Alpha blend
-  * Sharpness
+>  * Sharpness
-  * Raw
+>  * Raw
-Alpha blend will be laged.
+> Alpha blend will be laged.
-**Threshold:** how many pixels are considered in focus (percentage).
+====Threshold:====
+how many pixels are considered in focus (percentage).
+//Values://
+.1-5% \\
+-0.5 in 0.1 increments, 0.5-5 in 0.5
-**Color:** either fixed color, or a color coding according to focus intensity.
+====Color:====
+either fixed color, or a color coding according to focus intensity.
-**Grayscale image:** if enabled, LiveView will displayed as grayscale, but still recorded as color.
+====Grayscale image:====
+if enabled, LiveView will displayed as grayscale, but still recorded as color.
 High-contrast lines will be marked by blinking dots (or other setting from "Display type") showing which part of the image is in focus. To see how it works, check this [[http://www.luminous-landscape.com/forum/index.php?topic=56246.0|article]] from
@@ Line 751: / Line 563: @@
-==== Magic Zoom ====
+===== Magic Zoom =====
 Displays a zoom box for focus assist. Can be used while recording.
@@ Line 757: / Line 569: @@
 //Submenu options://
-**Trigger mode**
+====Trigger mode====
   * FocusR+HalfS: triggered by turning the focus ring, or by pressing shutter halfway.
   * Focus+ZREC: triggered by turning the focus ring, or by pressing Zoom In while recording.
   * Zoom In (*): triggered by Zoom In button (overrides Canon's default zoom  modes). To bypass magic zoom, press both zoom buttons at the same time  or cover the LCD sensor.
   * Always On: no trigger key needed. You can use both Canon's 5x/10x zoom and Magic Zoom.
-**Size** Size of zoom box: Small, medium or large
+====Size==== Size of zoom box: Small, medium or large
-**Position**
+====Position====
-**Magnification** 1:1, 2:1 or 3:1
+====Magnification====
+:1, 2:1 or 3:1
-**Focus confirm** When ML believes you have achieved perfect focus, Magic Zoom will display a focus confirmation:
+====Focus confirm====
+When ML believes you have achieved perfect focus, Magic Zoom will display a focus confirmation:
   * Green Bars
   * Split Screen: when the image is out of focus, the zoom box looks like a split focusing screen from old film cameras.
@@ Line 780: / Line 594: @@
-==== Cropmarks ====
+===== Cropmarks =====
 [Incomplete]
 Do to:
@@ Line 792: / Line 606: @@
 //Submenu options://
-**Bitmap (1/9)**
+====Bitmap (1/9)====
 Up to nine different cropmarks supported. Second number will show number of cropmarks actually available.
 Currently there are 5 cropmarks supplied with nightly builds:
@@ Line 801: / Line 615: @@
   * PhiVideo
-**Show in photo mode**
+====Show in photo mode====
-**Show in PLAY mode**
+====Show in PLAY mode====
 If you use custom cropmarks, place them in ML/CROPMKS folder on your SD
@@ Line 813: / Line 627: @@
 Grids activated by "Grid display" in Canon menu will interfere with ML's cropmarks. It's recommended not to use both at the same time.
-==== Ghost image ====
+===== Ghost image =====
 Shows a transparent overlay which can be created from any image in Play mode.
@@ Line 819: / Line 633: @@
 //Submenu options://
-**Auto-update**
+====Auto-update====
 To select the image, go to Play mode and press the LiveView button. Move
@@ Line 828: / Line 642: @@
-==== Spotmeter ====
+===== Spotmeter =====
 Measure brightness from a small spot in the frame.
@@ Line 834: / Line 648: @@
 //Submenu options://
-**Spotmeter Unit**
+====Spotmeter Unit====
   * Percent - 0 to 100%.
   * 0..255 - 8 bit RGB levels.
@@ Line 840: / Line 654: @@
   * RAW (EV) - Exposure level from sensor saturation using raw sensor data.
   * RGB (Percent) - RGB colors in percentag.
-**Spot Position**
+====Spot Position====
   * Focus box - Spot meter linked to the focus box.
   * Center - Spot meter linked to the center of image.
-==== False color ====
+===== False color =====
 This is a tool for evaluating the exposure.
@@ Line 851: / Line 665: @@
 //Submenu options://
+==== Palette ====
+//Values://
 **Marshall**
@@ Line 873: / Line 688: @@
-==== Histogram ====
+===== Histogram =====
 This exposure tool will show the distribution of image brightness levels in a histogram.
@@ Line 879: / Line 694: @@
 //Submenu options://
-**Histogram type**
+====Histogram type====
   * YUV-based, Luma
   * YUV-based, RGB
   * RAW-based (RGB) > To do: Pic example, basic functions included
   * RAW HistoBar (MAX)
-**RAW EV indicator**
+====RAW EV indicator====
   * OFF - Don't use the indicator.
   * Dynamic Range - Displays ynamic range at current ISO, from noise stdev.
   * ETTR hint - Show how many stops you can push exposure to the right.
-**Scaling**
+====Scaling====
   * Log
   * Linear
-**Clip warning**
+====Clip warning====
 - Display warning if the histogram with clipping.  This will
 display a warning for each color channel, when that channel is being
@@ Line 902: / Line 717: @@
-==== Waveform ====
+===== Waveform =====
 > To do: Waveform image
-**Waveform Size**
+====Waveform Size====
 //Submenu Options://
-**Small**
+====Small====
 **Large**
@@ Line 918: / Line 733: @@
 To learn how to read these graphs, see [http://www.youtube.com/watch?v=JXMvFk146R0|Final Cut Waveform Monitor]].
-==== Vectorscope ====
+===== Vectorscope =====
 This tool shows the color distribution with an U-V plot.
@@ Line 924: / Line 739: @@
 //Submenu options://
-**UV scaling**
+====UV scaling====
 Useful for color grading. To learn how to read it, see [[http://www.kdenlive.org/users/granjow/introducing-color-scopes-vectorscope|Introducing Color Scopes: The Vectorscope]].
-==== Level Indicator ====
+===== Level Indicator =====
-//Submenu options://
+//Values://
 Will show an electronic level indicator in Liveview ML screen, supported by a numerical display on the upper left. Resolution is 0.5 degrees. Indicator is available if supported by Canon. For those cams equipped with a dual-axis level indicator there is no numerical display for second axis.
@@ Line 942: / Line 757: @@
-==== Bit Rate ====
+===== Bit Rate =====
 Controls H.264 bitrate used for video recording.
@@ Line 948: / Line 763: @@
 //Submenu options://
-**Mode**
+====Mode====
   * CBR is constant bitrate. You specify a factor for multiplying default video bitrate, between 0.1x and 3.0x. CBR 1.0x is the firmware default  setting. CBR actually works by adjusting QScale on the fly; the instant  value is displayed near the recording dot.
@@ Line 954: / Line 769: @@
   * Firmware default completely disables bitrate control.
-**CBR factor** 0.1x to 3.0x.
+====CBR factor====
+.1x to 3.0x.
-**QScale** -16 to 16.
+====QScale====
+-16 to 16.
-**Bitrate Info** ON or OFF.
+====Bitrate Info====
+ON or OFF.
-**BuffWarnLevel** 30 to 100.
+====BuffWarnLevel====
+to 100.
 In CBR mode, QScale will not go outside [-16…+16]. When QScale reaches the
@@ Line 971: / Line 790: @@
 BuffWarnLevel setting to customize this.
-==== Movie Record (50D) ====
+===== Movie Record (50D) =====
 //Submenu options://
@@ Line 989: / Line 808: @@
 standard firmware (until you clear your settings).
-==== Shutter Button (50D) ====
+===== Shutter Button (50D) =====
 //Submenu options://
-**Block during REC**
+====Block during REC====
 blocks the shutter and related (AF, *) buttons while recording. In 50D,
 taking pictures while recording would result in ERR99; with this
@@ Line 999: / Line 818: @@
 effect: this will disable image stabilization during recording.
-**Hold during REC (IS)**
+====Hold during REC (IS)====
 ML will keep the shutter button pressed half-way during recording,
 which will enable image stabilization (IS). Side effect: you need to
@@ Line 1005: / Line 824: @@
 let you stop recording.
-==== REC key ====
+===== REC key =====
 This option enables you to start/stop movie recording by half-pressing the shutter button.
@@ Line 1011: / Line 830: @@
 //Submenu options://
-**Require long press**
+====Require long press====
    * OFF
    * ON (1s)
-**Allowed actions**
+====Allowed actions====
    * Start/Stop
@@ Line 1025: / Line 844: @@
-==== Gradual Exposure ====
+===== Gradual Exposure =====
-//Submenu options://
+//Values://
 **1EV / 8 frames**
@@ Line 1044: / Line 863: @@
-==== FPS override ====
+===== FPS override =====
 > INCOMPLETE
@@ Line 1052: / Line 871: @@
 //Submenu options://
-**Desired FPS**
+====Desired FPS====
 .150 fps to 65 fps depending on your model capabilities. If the
 desired value is not possible, ML will choose the closest safe option
 (see 'Actual FPS' below).
-**Optimize for**
+====Optimize for====
 Presets that will suit different situations:
   * Low light - use this option for recording timelapse with shutter speed set  to 1/fps (360 degrees); at high FPS values, you may be able to use other shutter speed values.
@@ Line 1065: / Line 884: @@
   * High Jello: maximize the jello effect and enable fast shutter speeds. You  can use this mode for recording slit-scan frames (distorted images like  these, which use the extreme jello effect in creative ways).
-**Shutter range**
+====Shutter range====
 displays the available shutter speed range with current settings. When
 you use FPS override, Canon menu will still display 1/30 to 1/4000, but
@@ Line 1072: / Line 891: @@
 decreasing timer B will result in faster shutter speeds available.
-**FPS Timer A**
+====FPS Timer A====
 FPS is changed by altering two timer values. Increasing either of these
 values results in lower FPS, faster shutter speed and alters rolling
@@ Line 1078: / Line 897: @@
 ballpark and ML will re-adjust timer B to match your FPS choice.
-**FPS Timer B** ML will not re-adjust timer A, so this option will let you fine-tune the exact FPS value.
+====FPS Timer B====
+ML will not re-adjust timer A, so this option will let you fine-tune the exact FPS value.
-**Main Clock** displays the crystal oscillator frequency of the FPS circuit driver (read-only, depends on your camera).
+====Main Clock====
+displays the crystal oscillator frequency of the FPS circuit driver (read-only, depends on your camera).
-**Actual FPS** this displays the current FPS, computed as TG_FREQ / timerA / timerB (read-only).
+====Actual FPS====
+this displays the current FPS, computed as TG_FREQ / timerA / timerB (read-only).
-**Rolling Shutter**
+====Rolling Shutter====
-**Constant expo**
+====Constant expo====
-**Sync w.Shutter**
+====Sync w.Shutter====
-**FPS ramping**
+====FPS ramping====
-**Ramp duration**
+====Ramp duration====
 This function will not change the frame rate from the video header; the
@@ Line 1105: / Line 927: @@
   * NTSC modes: 30p/60p/24p. Rounded frame rates: 29.97fps, 23.976fps, 11.988fps and so on. For fine-tuning and calibrating custom frame rates, use  EOSTimerGen.
-==== HDR video ====
+===== HDR video =====
 [Incomplete] outdated info, dead links ...
@@ Line 1116: / Line 938: @@
 //Submenu options://
-**ISO A**
+====ISO A====
-**ISO B**
+====ISO B====
 Select the two ISO values from the submenu. Possible postprocessing workflows:
@@ Line 1129: / Line 951: @@
 Don't get confused about HDR and Dual-ISO feature. This here is about HDR combining 2 frames with different ISO settings for movies. Dual-ISO is about using 2 ISO settings inside a frame/still photo by interlaced sensor lines.
-==== Vignetting ====
+===== Vignetting =====
 In camera vignetting.
@@ Line 1135: / Line 957: @@
 //Submenu options://
-**Mid-range correction** Correction applied between the central areas and the corners.
+====Mid-range correction====
+Correction applied between the central areas and the corners.
-**Corner correction** Stronger bias towards corners.
+====Corner correction====
+Stronger bias towards corners.
-**Extreme corner correction** Heavy correction in the corners.
+====Extreme corner correction====
+Heavy correction in the corners.
 Minus values increase the vignette.
-==== Image Finetuning ====
+===== Image Finetuning =====
 Settings for fine control of your image.
@@ Line 1150: / Line 975: @@
 //Submenu options://
-**ML Digital ISO** Pull back the ISO to achieve superior highlight roll off.
+====ML Digital ISO====
+Pull back the ISO to achieve superior highlight roll off.
-**Black Level** Set your black level to control green shadows.
+====Black Level====
+Set your black level to control green shadows.
-**Absolute Zero Sharpness** Disables any kind of sharpening.
+====Shutter fine-tuning====
+> incomplete
-**Edge Emphasis** Picks out edges in bright areas.
+>====Absolute Zero Sharpness====
+> Disables any kind of sharpening.
-**Noise Reduction** In camera noise reduction.
+>====Edge Emphasis====
+> Picks out edges in bright areas.
-==== Creative Effects ====
+>====Noise Reduction====
+> In camera noise reduction.
-Custom image effects found by investigating DIGIC registers.
+>===== Creative Effects ===== (Obsolete?)
-//Submenu options://
+>Custom image effects found by investigating DIGIC registers.
-**Desaturate** lets you record grayscale with any picture style.
+> //Submenu options://
-**Negative image** Inverts your luma values
+>====Desaturate====
+> lets you record grayscale with any picture style.
-**Swap U-V** Red becomes blue.
+>====Negative image====
+> Inverts your luma values
-**Cartoon look** for this to work, set sharpness in your picture style to any nonzero value.
+>====Swap U-V====
+> Red becomes blue.
+>====Cartoon look====
+> for this to work, set sharpness in your picture style to any nonzero value.
-==== Movie crop mode ======
+===== Movie crop mode ======
 D 3x crop mode for supported cameras (650D, 700D, EOS M)
-//Submenu options://
+//Values://
@@ Line 1187: / Line 1024: @@
-==== RAW video (MLV) ====
+===== RAW video (MLV) =====
 (http://www.magiclantern.fm/forum/index.php?topic=7122.0)
@@ Line 1194: / Line 1031: @@
 //Submenu options://
-**Resolution** 640 to 3584. Width of captured image in pixels. 5D2 tops out at 1856.
+====Resolution====
+to 3584. Width of captured image in pixels. 5D2 tops out at 1856.
-**Aspect Ratio** 5:1 to 1:2. Height of captured image.
+====Aspect Ratio====
+:1 to 1:2. Height of captured image.
-**Create directory** ON or OFF. Saves video chunks in separate folders.
+====Create directory====
+ON or OFF. Saves video chunks in separate folders.
-**Global Draw** ON or OFF. Disables GD while recording, though some previews require it.
+====Global Draw====
+ON or OFF. Disables GD while recording, though some previews require it.
-**Frame Skipping** ON or OFF. Stops recording if you drop a frame.
+====Frame Skipping====
+ON or OFF. Stops recording if you drop a frame.
-**Preview Options** Auto, Canon, ML Grayscale, HaCKeD & Hacked No Prev.
+====Preview Options====
+Auto, Canon, ML Grayscale, HaCKeD & Hacked No Prev.
-**Status when recording** Icon, None & Debug.
+====Status when recording====
+Icon, None & Debug.
-**Start delay** 2, 4 & 10 second delay, useful for stabilizing.
+====Start delay====
+, 4 & 10 second delay, useful for stabilizing.
-**Files > 4GB (exFAT)** OFF, ON. By default ML will splitt long recordings into chunks up to 4 GByte each. File naming starts with *.MLV, followed by *.M00, M01 and - in theory - up to *.M99. Your record consists of *all* parts put together in postprocessing. So don't forget to transfer them to your working directory.
+====Files > 4GB (exFAT)====
+OFF, ON. By default ML will splitt long recordings into chunks up to 4 GByte each. File naming starts with *.MLV, followed by *.M00, M01 and - in theory - up to *.M99. Your record consists of *all* parts put together in postprocessing. So don't forget to transfer them to your working directory.
 With setting ON only a unique file *.MLV will be created and growing in size while recording. If your file system is not exFAT ML will get stuck reaching 4 GB limit. ML itself does not check if file system is exFAT!
 Caveat: Files > 4 GB are not supported on some file systems so make sure your storage device is compatible!
-**Digital dolly** Pan your frame in camera digitally.
+====Digital dolly====
+Pan your frame in camera digitally.
-**Card warm-up** Some cards perform better after warming up.
+====Card warm-up====
+Some cards perform better after warming up.
-**Extra Hacks** Small tweaks to maximise writing speed.
+====Extra Hacks====
+Small tweaks to maximise writing speed.
-**Debug trace** Writes an execution trace to your card and causes performance dips.
+====Debug trace====
+Writes an execution trace to your card and causes performance dips.
-**Show buffer graph** Shows current buffer usage and expected frames.
+====Show buffer graph====
+Shows current buffer usage and expected frames.
-**Buffer fill method** Select your method for filling buffers.
+====Buffer fill method====
+Select your method for filling buffers.
-**CF-only Buffers**
+====CF-only Buffers====
-**Card Spanning**
+====Card Spanning====
-**Reserve card space** Reserves a chunk of space before recording to write over if you fill the card during a take.
+====Reserve card space====
+Reserves a chunk of space before recording to write over if you fill the card during a take.
-**Tag: Text** Custom filenames.
+====Tag: Text====
+Custom filenames.
-**Tag: Take**
+====Tag: Take====
-==== RAW video ====
+===== RAW video =====
 (https://www.magiclantern.fm/forum/index.php?topic=16650.0)
@@ Line 1244: / Line 1098: @@
 //Submenu options://
-**Resolution** 640 to 35xx. Width of captured image in pixels. 5D2 tops out at 1856.
+====Resolution====
+to 35xx. Width of captured image in pixels. 5D2 tops out at 1856.
-**Aspect Ratio** 5:1 to 1:2. Defines height of captured image.
+====Aspect Ratio====
+:1 to 1:2. Defines height of captured image.
-**Pre-record** OFF 1, 2 5 or 10 seconds: Stores given duration into internal memory buffer in a loop. Old frames are discarded.
+====Pre-record====
+OFF 1, 2 5 or 10 seconds: Stores given duration into internal memory buffer in a loop. Old frames are discarded.
-**Playback** Will play back the last record. Requires module mlv_play to be loaded.
+====Playback====
+Will play back the last record. Requires module mlv_play to be loaded.
-**Advanced ...**
+====Advanced ...====
- * Preview: Auto, Real-time, Framing, Frozen LV
+==== Preview:====
+Auto, Real-time, Framing, Frozen LV
- * Digital dolly: Pan your frame in camera digitally.
+==== Digital dolly:====
+Pan your frame in camera digitally.
- * Card warm-up: Some cards perform better after warming up.
+==== Card warm-up====
+Some cards perform better after warming up.
- * Use SRM job memory:
+====Use SRM job memory:====
- * Small hacks: Small tweaks to maximise writing speed.
+==== Small hacks:====
+Small tweaks to maximise writing speed.
- * Show buffer graph: Shows detailed info and buffer allocation graphs.
+====Show buffer graph:====
+Shows detailed info and buffer allocation graphs.
-==== Movie Tweaks ====
+===== Movie Tweaks =====
 //Submenu options://
-**Time indicator** When recording a movie, ML will display a small time counter in the upper right corner, which can be:
+====Time indicator====
+When recording a movie, ML will display a small time counter in the upper right corner, which can be:
   * Elapsed: duration of the current clip
   * Remain.Card: estimated amount of recording time remaining on the card.
@@ Line 1279: / Line 1143: @@
 normal.
-**Movie Logging** If this setting is ON,
+====Movie Logging====
+If this setting is ON,
 Magic Lantern will write out a metadata file for the each movie to
 MVI_1234.LOG (numbered after the movie). The log file contains lens and
@@ Line 1287: / Line 1152: @@
 to CSV and import them in MS Excel.
-**Movie Restart**
+====Movie Restart====
 While this setting is on, movie recording will restart automatically,
 unless you stop it. There will be a few frames (typ. about 0.5 seconds) skipped during
@@ Line 1305: / Line 1170: @@
-**REC/STBY notify** Custom notifications for recording or standby:
+====REC/STBY notify====
+Custom notifications for recording or standby:
   * Red Crossout highly recommended if you forget to press record
   * Message it shows STBY or REC
@@ Line 1312: / Line 1178: @@
 All options with display output require Global Draw/Overlays activated.
-**Force LiveView** bypass the dialog saying Press LV button to activate movie shooting.
+====Force LiveView====
+bypass the dialog saying Press LV button to activate movie shooting.
   * Always: force LiveView even if you use an unchipped lens, or no lens at all. Be careful, you may get dust on the sensor while changing lenses.
   * Start & CPU lenses: it will force LiveView at startup, regardless of the  lens used. After this, it will only bypass the dialog when a chipped  lens is attached (i.e. it will enter LiveView as soon as you attach a  chipped lens).
-**Shutter Lock** This option locks the shutter value in movie mode (you will be able to change it only from ML menu).
+====Shutter Lock====
+This option locks the shutter value in movie mode (you will be able to change it only from ML menu).
@@ Line 1323: / Line 1191: @@
-==== Exposure Lock (50D) ====
+===== Exposure Lock (50D) =====
-//Submenu options://
+//Values://
 Locks the exposure in movie mode. You can also use the * button (you don't have to hold it pressed).
@@ Line 1340: / Line 1208: @@
-==== Advanced Bracket ====
+===== Advanced Bracket =====
 > INCOMPLETE
 Exposure bracketing for HDR images and timelapses.
@@ Line 1347: / Line 1215: @@
 //Submenu options://
-**Bracket type** Choose the variables to bracket.
+====Bracket type==== Choose the variables to bracket.
   * Exposure (Tv, Ae)
   * Exposure (Flash)
   * DOF (Aperture)
-**Frames** Number of bracketed shots. Can be computed automatically.
+====Frames==== Number of bracketed shots. Can be computed automatically.
   * Automated
   * 0 - 12
-**EV increment** Exposure difference between two frames.
+====EV increment====
+Exposure difference between two frames.
   * Range 0.5 - 8 EV (0.5 - 2 EV in 0.5 EV increments, 2 - 8 in 1)
-**Sequence** Bracketing sequence order / type. Zero is always first (cannot be changened in code, don't ask for it).
+====Sequence====
+Bracketing sequence order / type. Zero is always first (cannot be changened in code, don't ask for it).
   * 0 - -- (descending exposure time
   * 0 - + -- ++
   * 0 + ++
-**2- second delay** Delay before starting the exposure.
+====2- second delay====
+Delay before starting the exposure.
   * Auto
   * OFF
-**ISO shifting** Also use ISO as bracket variable. Range 100 - max AutoISO.
+====ISO shifting====
+Also use ISO as bracket variable. Range 100 - max AutoISO.
   * OFF
   * Full
@@ Line 1388: / Line 1260: @@
 Exposure time below cam's shortest shutter time: You will see an "E" appended to the lowest duration time. Means: Cam's limits are reached, this is an error. All photos set for lower durations will be taken with cam's fastest shutter timing.
-==== Intervalometer ====
+===== Intervalometer =====
 > INCOMPLETE
 Take pictures at fixed intervals.
@@ Line 1395: / Line 1267: @@
 //Submenu options://
-**Take a pic every** Duration between two shots. More precise: Time between 2 "shutter button actuations". If duration is set to lowest setting (0s/like crazy) cam will take pics in burst mode.
+====Take a pic every====
+Duration between two shots. More precise: Time between 2 "shutter button actuations". If duration is set to lowest setting (0s/like crazy) cam will take pics in burst mode.
 Caveats:
 If selected interval is lower than exposure time next pic will be taken immediately after last pic.
@@ Line 1404: / Line 1277: @@
 > Internal note: ML menu shows (bottom line) calculation for time lapse duration depending on number of pics and interval. No idea how to represent this.
-** Start trigger ** Options for how to trigger intervalometer.
+==== Start trigger ====
+Options for how to trigger intervalometer.
    * Leave Menu: Will trigger Intervalometer by leaving ML menu or by camera startup/exiting powersave. Using this option is recommended if Intervalometer is running together with other ML/Canon features triggered by shutter button (FRSP, for example).
@@ Line 1411: / Line 1285: @@
-**Start after** Start delay (up to 8 hours).
+====Start after====
+Start delay (up to 8 hours).
-**Stop after** Stop after X pictures.
+====Stop after====
+Stop after X pictures.
 You can stop the intervalometer by rotating the mode dial, by pressing MENU
@@ Line 1432: / Line 1308: @@
 blink once per second to let you know it's alive and kicking.
-**Ramping options**
+====Ramping options====
 Only visible after loading module adv_int.mo
@@ Line 1466: / Line 1342: @@
 //Submenu options://
-  * Enabled OFF, ON
+=== Enabled ===
-  * Use Global Time OFF, ON
+  OFF, ON
-  * Loop After OFF, 1 - 5000
+=== Use Global Time ===
-  * External Source OFF, ON
+  OFF, ON
-  * List Keyframes
+=== Loop After ===
-  * Save Keyframes
+  OFF, 1 - 5000
-  * Clear Keyfames
+=== External Source ===
-  * New Keyframe...
+  OFF, ON
+=== List Keyframes ===
+===Save Keyframes ===
+===Clear Keyfames ===
+=== New Keyframe ===
-==== Post Deflicker ====
+===== Post Deflicker =====
 Menu item only visible after loading module "Post Deflicker (deflick.mo)
@@ Line 1487: / Line 1367: @@
 //Submenu options://
-**Sidecar file type** Sidecar file format for deflicker metadata.
+====Sidecar file type====
+Sidecar file format for deflicker metadata.
    * UFRaw: Suitable for open-source UFRaw image processor. Because of cam's limitation files are named "*.UFR". Rename to "*.ufraw" before running them into UFRaw.
    * Adobe XMP: Suitable for Adobe products.
-**Deflicker percentile** Where to meter for deflickering. Recommended 50%.
+====Deflicker percentile====
+Where to meter for deflickering. Recommended 50%.
-**Deflicker target level** Desired exposure level for processed pics. 0 = overexposed.
+====Deflicker target level====
+Desired exposure level for processed pics. 0 = overexposed.
 File naming for sidecar files expects setting "Color Space = sRGB" and does not support "Adobe RGB" setting on its own.
@@ Line 1500: / Line 1383: @@
-==== Bulb Timer ====
+===== Bulb Timer =====
 Very long exposures with Bulb mode and ML timer. This feature is useful for night shots and astrophotography.
@@ Line 1506: / Line 1389: @@
 //Submenu options://
-**Exposure duration** from 1s to 8h00m00s in 1 seconds increments.
+====Exposure duration====
+from 1s to 8h00m00s in 1 seconds increments.
-**Display during exposure**
+====Display during exposure====
    * Don't change: You will see a clock counting up
@@ Line 1520: / Line 1404: @@
-==== LCDsensor Remote ====
+===== LCDsensor Remote =====
 Start/stop remote shutter release mode with the LCD sensor.
@@ Line 1526: / Line 1410: @@
 //Submenu options://
-**Near:** To take a picture, put your hand near the LCD sensor.
+====Near:====
+To take a picture, put your hand near the LCD sensor.
-**Away:** Picture is taken when you get your hand away from the sensor. You may combine this setting with Mirror Lockup.
+====Away:====
+Picture is taken when you get your hand away from the sensor. You may combine this setting with Mirror Lockup.
-**Wave:** Picture is taken after you wave your hand 3 times near the
+====Wave:====
+Picture is taken after you wave your hand 3 times near the
 sensor. You can leave it on without interfering (too much) with normal
 shooting.
@@ Line 1541: / Line 1428: @@
-==== Audio RemoteShot ====
+===== Audio RemoteShot =====
 Start/stop remote audio trigger.
@@ Line 1547: / Line 1434: @@
 //Submenu options://
-**Trigger level (dB)**
+====Trigger level (dB)====
 To take a picture (or start recording a movie), make some loud noise, for
@@ Line 1559: / Line 1446: @@
-==== Motion Detect ====
+===== Motion Detect =====
 > INCOMPLETE
 //Submenu options://
-**Trigger by**
+====Trigger by====
     * Exposure change: it only reacts to brightness changes. Detects large
 moving subjects which cause significant change in exposure.
@@ Line 1572: / Line 1459: @@
     * Steady hands: For handheld shooting. Triggers if there is no blur detected.
-**Trigger level** High values = less sensitivity to motion.
+====Trigger level====
+High values = less sensitivity to motion.
-**Detect Size** Size of the area on which motion shall be detected.
+====Detect Size====
+Size of the area on which motion shall be detected.
-**Delay** Range from 0 (OFF) to 1 second in 0.1 second increments. Delay between the motion detection and picture taken.
+====Delay====
+Range from 0 (OFF) to 1 second in 0.1 second increments. Delay between the motion detection and picture taken.
 Detection time is somewhere between 200-300ms (according to DataGhost's speed test), or faster with silent pictures. If "Use Autofocus" is selected it may add another (non-deterministic) delay due to the focusing.
@@ Line 1584: / Line 1474: @@
-==== Silent Pictures ====
+===== Silent Pictures =====
 >INCOMPLETE
@@ Line 1595: / Line 1485: @@
 //Submenu options://
-**Silent Mode**
+====Silent Mode====
     * Simple: simple, low-resolution. Image resolution is usually
 around 1 or 2 MPix, and depends on the current mode (zoom or not,
@@ Line 1618: / Line 1508: @@
 Source: https://www.magiclantern.fm/forum/index.php?topic=12523.msg143510#msg143510
-**Trigger mode**
+====Trigger mode====
    * Half-shutter press
@@ Line 1624: / Line 1514: @@
    * Delayed    Start image capture 2 seconds after half-shutter release
-**File Format** Choose DNG or MLV. Later requires loading MLV_REC.mo.
+====File Format====
+Choose DNG or MLV. Later requires loading MLV_REC.mo.
 In short: "DNG" writes a single pic to a single files. MLV writes all single pics of a session into a single MLV. Similiar to a movie file consisting of several consecutive frames. A new session (incrementing file name) begins after powersave or after shutdown/restart.
 If you want to use Deflicker option (deflick.mo) you have to use DNG format. MLV not supported.
@@ Line 1651: / Line 1542: @@
-==== Mirror Lockup ====
+===== Mirror Lockup =====
 Mirror lockup. See Canon user guide for details.
@@ Line 1657: / Line 1548: @@
 //Submenu options://
-**MLU mode** Choose when MLU should be active.
+====MLU mode====
+Choose when MLU should be active.
-**Handheld Shutter** At what shutter speeds you want to use handheld MLU.
+====Handheld Shutter====
+At what shutter speeds you want to use handheld MLU.
-**Handheld Delay** Delay between mirror and shutter movement.
+====Handheld Delay====
+Delay between mirror and shutter movement.
-**Normal MLU Delay** MLU delay used with intervalometer, bracketing, etc.
+====Normal MLU Delay====
+MLU delay used with intervalometer, bracketing, etc.
 Timer+Remote will auto-enable MLU under one of the following conditions (and disable it otherwise):
@@ Line 1672: / Line 1567: @@
-==== Flash tweaks ====
+===== Flash tweaks =====
 A few tweaks for flash users:
@@ Line 1678: / Line 1573: @@
 //Submenu options://
-   * Flash expo compensation (-10..+3 EV). Tip: you may use -10EV to trigger an
+==== Flash expo compensation ====
-external flash without putting light on the scene coming from the
+   -10..+3 EV.
-onboard flash.
+Tip: you may use -10EV to trigger an external flash without putting light on the scene coming from the onboard flash.
-   * Flash / No flash: use this when you are not sure
+==== Flash / No flash ====
-whether to use flash or not. Odd pictures (by file number) will be taken
+use this when you are not sure whether to use flash or not. Odd pictures (by file number) will be taken with flash, even pictures without flash.
-with flash, even pictures without flash.
 > Available for 1100D, 500D, 550D and 600D only. None of them here to test. Anyone out here to be able to drop a word?
-   * 3rd party flash in LV: a trick for using a non-Canon flash in LiveView on Rebel cameras, which
+==== 3rd party flash in LV====
-disables LiveView on half-shutter press. DISABLE this option when you don't use it!!!
+A trick for using a non-Canon flash in LiveView on Rebel cameras, which disables LiveView on half-shutter press. DISABLE this option when you don't use it!!!
-==== Shoot Preferences ====
+===== Shoot Preferences =====
 > INCOMPLETE
 //Submenu options://
-**Pics at once** Range: 1 (OFF) - 9. How many pics to take at once for each trigger event.
+====Pics at once====
+Range: 1 (OFF) - 9. How many pics to take at once for each trigger event.
 Useful for one-time events like Audio Remote Shot, Trap Focus, Motion Detect.
 If using together with Intervalometer make sure exposure time (multiplied) does not exceed interval duration.
-**Use Autofocus** For intervalometer, audio remote shot and motion detect.
+====Use Autofocus====
+For intervalometer, audio remote shot and motion detect.
 With default setting OFF intervalometer, audio remote shot and motion detect will *not* use autofocus no matter AF on lens is selected. If trigger condition is met an image will be taken!
@@ Line 1707: / Line 1603: @@
 Also consider that lag between trigger condition met and image aquisition will be extended by the time needed for focusing.
-**Post scripts** Post processing scripts/listings for bracketing and focus stacking.
+====Post scripts====
+Post processing scripts/listings for bracketing and focus stacking.
   * Enfuse
@@ Line 1717: / Line 1614: @@
-**Intervalometer Script** Scripts/list for sorting intervalometer sequences.
+====Intervalometer Script====
+Scripts/list for sorting intervalometer sequences.
 Those scripts consists of commands creating directories for each interval sequence and moving associated image files to those directories.
@@ Line 1731: / Line 1629: @@
-**Snap Simulation** Simulates picture aquisition for testing purposes without wearing out shutter and mirror. Useful for testing Íntervalometer, Advanced Bracketing and Focus Stacking features.
+====Snap Simulation====
+Simulates picture aquisition for testing purposes without wearing out shutter and mirror. Useful for testing Íntervalometer, Advanced Bracketing and Focus Stacking features.
@@ Line 1745: / Line 1644: @@
-==== Trap Focus ====
+===== Trap Focus =====
 Takes a picture when the subject comes into focus.
-//Submenu options://
+//Values://
 **OFF**
@@ Line 1771: / Line 1670: @@
-==== Follow Focus ====
+===== Follow Focus =====
 Very simple follow focus (like a rack focus controlled manually).
 //Submenu options://
+====Focus using====
+//Values://
-**Focus using OFF**
+**OFF**
-**Focus using Arrows**
+**Arrows**
 you will be able to focus with the arrow keys.
-**Focus using LCD Sensor**
+**LCD Sensor**
 Focus by placing your hand near the LCD sensor (avoiding
 shake). To use this, you may need to disable LCDsensor Remote.
@@ Line 1798: / Line 1699: @@
-==== Focus End Point ====
+===== Focus End Point =====
 This is end point of rack focus and focus stack (X focus steps from the start point, i.e. from current focus point).
-//Submenu options://
+//Values://
 Works in Liveview only!
@@ Line 1823: / Line 1724: @@
-==== Rack Focus ====
+===== Rack Focus =====
 Triggers the rack focus operation that moves between the start and end focus points.
 You have to set both points in "Focus end point" menu!
-//Submenu options://
+//Values://
 After the move is complete pressing again reverses the move.
@@ Line 1841: / Line 1742: @@
 Rack Focus (and Focus Stacking) are using AF motor step settings defined in menu item "Focus Settings"!
-==== Focus Stacking ====
+===== Focus Stacking =====
 This selection will shoot a series of photographs with varying focus points.
@@ Line 1850: / Line 1751: @@
 //Submenu options://
-**Run focus stack**
+====Run focus stack====
-**Num. pics in front** "In front". Direction: From "reference point" (current focus point) towards your camera.
+====Num. pics in front====
+"In front". Direction: From "reference point" (current focus point) towards your camera.
-**Num. pics behind** "behind". Direction: From "reference point" (current focus point) away from your camera.
+====Num. pics behind====
+"behind". Direction: From "reference point" (current focus point) away from your camera.
-**Focus steps / picture** "Number * Step Size = actual steps between two pics". In short: Adjust Step Size according to lens used and adjust "Focus steps/picture" according to magnification factor, aperture and desired details in stacked image.
+====Focus steps / picture====
+"Number * Step Size = actual steps between two pics". In short: Adjust Step Size according to lens used and adjust "Focus steps/picture" according to magnification factor, aperture and desired details in stacked image.
-**Flash Delay** If flash is used this setting will determine seconds reserved for recharging. Your cam is unable to know if the flash is properly charged or not.
+====Flash Delay====
+If flash is used this setting will determine seconds reserved for recharging. Your cam is unable to know if the flash is properly charged or not.
-**Copy rack focus range** Takes focus points selected with "Rack focus" for Focus stacking. See "Usage", esp. "Method 1".
+====Copy rack focus range====
+Takes focus points selected with "Rack focus" for Focus stacking. See "Usage", esp. "Method 1".
 Usage:
@@ Line 1890: / Line 1796: @@
-==== Focus Settings ====
+===== Focus Settings =====
 > INCOMPLETE
 //Submenu options://
-    * Step Size: Step size for one focus command, as used by EOS Utility.
+====Step Size====
+Step size for one focus command, as used by EOS Utility.
-    * Step Delay: Delay between two successive focus commands. May be used with option "Step Wait".
+====Step Delay====
+Delay between two successive focus commands. May be used with option "Step Wait".
-    * Step Wait:
+====Step Wait====
 If Wait is not active, ML will only wait a for fixed delay before sending
@@ Line 1908: / Line 1816: @@
 then it will wait for a fixed delay, as configured here. This will
 increase rack focus accuracy, but may cause stutter with certain lenses.
-    * Left/Right dir
+====Left/Right dir====
-    * Up/Down dir
+====Up/Down dir====
-    * Start delay
+====Start delay====
-==== DOF Settings ====
+===== DOF Settings =====
 Configures Depth of Field info display at the bottom of this screen.
@@ Line 1921: / Line 1829: @@
 //Submenu options://
-**Circle of Confusion**
+====Circle of Confusion====
-**DOF formula**
+====DOF formula====
     * Simple
     * Diffraction-aware
-**DOF info in LiveView**: OFF or ON
+====DOF info in LiveView====
+OFF or ON
-==== Focus Patterns ====
+===== Focus Patterns =====
 Custom focus patterns which can be used either with autofocus or trap focus. Menu item will be seen in cameras with "classic" 9-point rhombus.
@@ Line 1936: / Line 1845: @@
 //Submenu options://
-**Center selection**
+====Center selection====
-**Horiziontal selection**
+====Horizontal selection====
-**Vertical selection**
+====Vertical selection====
-**Shortcut keys**
+====Shortcut keys====
 To change the focus pattern:
@@ Line 1954: / Line 1863: @@
-==== DOF info ====
+===== DOF info =====
 Read-only lens and Depth of Field data.
-//Submenu options://
+//Values//
 ** Lens:** Lens identifier, focal length, aperture
@@ Line 2001: / Line 1910: @@
-==== LV Digic peaking ====
+===== LV Digic peaking =====
 LiveView focus peaking __without__ affecting write performance
@@ Line 2007: / Line 1916: @@
 Will only displayed if half-shutter button is not pressed!
-//Submenu options://
+//Values://
 **OFF**
@@ Line 2017: / Line 1926: @@
 **Edge + chroma** Same as Edge image but in chroma.
-==== LV brightness ====
+===== LV brightness =====
-//Submenu options://
+//Values://
+Normal, High, Very high
-==== LV contrast ====
+===== LV contrast =====
 Adjusts the contrast in LiveView. It doesn't affect recording. This helps when focusing with very flat picture styles.
-//Submenu options://
+//Values://
 **Zero**
@@ Line 2044: / Line 1954: @@
-==== LV saturation ====
+===== LV saturation =====
 Adjusts the saturation in LiveView. It doesn't affect recording. This helps you focus without being distracted by color.
-//Submenu options://
+//Values://
 **Grayscale (zero)**
@@ Line 2063: / Line 1973: @@
-==== LV display gain ====
+===== LV display gain =====
 Photo/stills mode only.
@@ Line 2069: / Line 1979: @@
 dark scenes (where Canon's LiveView would be pitch black).
-//Submenu options://
+//Values://
 **OFF**
@@ Line 2080: / Line 1990: @@
-==== Clear Overlays ====
+===== Clear Overlays =====
 Clear bitmap overlays from LiveView display.
-//Submenu options://
+//Values://
 **OFF**
@@ Line 2109: / Line 2019: @@
 Be aware there are other options affecting overlay visibility: Overlay screen -> Global Draw -> Options: Off, LiveView only, Quickreview only, Both LV and QR. And MLV_REC has a switch to turn off Global Draw, too.
-==== Defishing ====
+===== Defishing =====
 Preview the rectified (defished) image from Samyang 8mm fisheye lens, using rectilinear projection.
@@ Line 2124: / Line 2034: @@
 This feature works best in photo mode (outside LiveView). Defishing uses a pre-computed look-up table (LUT). It is possible to create LUT files for any other lens or projection by defishing vram/xy.png with your favorite defishing software, and then running vram/defish-lut.m to get the LUT file. All the required files are found in the ML source tree. Project files (*.PTO) for nona (hugin) are provided for both rectilinear and Panini projections.
-==== Anamorphic ====
+===== Anamorphic =====
 Adjust display for anamorphic lenses.
@@ Line 2132: / Line 2042: @@
 **OFF**
-**5:4**
+**5:4(1.25**
-**4:3**
+**4:3(1.33)**
-**7:5**
+**7:5(1.4)**
-**3:2**
+**3:2(1.5)**
-**5:3**
+**5:3 (1.66)**
+**9:5 (1.8)**
 **2:1**
-==== Advanced settings ====
+===== Advanced settings =====
 //Submenu options://
-**Screen Layout** Choose screen layout (position of ML top and bottom bars), for different cameras or for external monitors.
+====Screen Layout====
+Choose screen layout (position of ML top and bottom bars), for different cameras or for external monitors.
 Top/bottom layouts:
@@ Line 2165: / Line 2078: @@
   * Bottom, under 16:9: suitable for low-resolution external monitors and for 4:3-screen cameras in movie mode.
-**Color scheme**
+====Color scheme====
 This affects the colors and brightness of the on-screen information including LiveView overlays, Canon menus and ML menus.
-//Submenu options://
+//Value://
 Range from: Default (bright), Dark, Bright Gray, Dark Gray, Dark Red, Dark Green. Tip:
@@ Line 2175: / Line 2088: @@
-**Image position**
+====Image position====
 This may make the image better visible from different angles
 (especially on cameras without flip-out screen).
-//Submenu options://
+//Values://
 Range from -16px to 16px in 8px increments.
-**UpsideDown mode** This mode is useful if you want to mount your camera upside-down.
+====UpsideDown mode====
+This mode is useful if you want to mount your camera upside-down.
-**Orientation**
+====Orientation====
 Upside-down and mirroring option
@@ Line 2191: / Line 2105: @@
 For cams with flip-out LCD
-//Submenu options://
+//Values://
    * Normal
@@ Line 2200: / Line 2114: @@
-**Auto Mirroring**
+====Auto Mirroring====
 For cameras with flip-out LCD, this options prevents mirroring the display
 when you open it at 180 degrees.
-**LV crazy colors**
+====LV crazy colors====
 May be helpful for white balance.
-//Submenu options://
+//Values://
    * OFF
@@ Line 2216: / Line 2130: @@
    * Extreme Chrome
-**Force HDMI-VGA**
+====Force HDMI-VGA====
 This option will force a low-resolution mode on HDMI displays
 (720×480), which avoids black screen when you start/stop recording.
@@ Line 2225: / Line 2139: @@
-====  Kill Canon GUI ====
+=====  Kill Canon GUI =====
 > Can some 50D user verify the location of this setting?
@@ Line 2231: / Line 2145: @@
 For 50D only: disable Canon graphics elements to avoid conflicts with ML graphics in LiveView.
-//Submenu options://
+//Values://
    * Idle/Menus: only enable Canon graphics when some transparent menu from LiveView is active.
@@ Line 2247: / Line 2161: @@
 > INCOMPLETE
-==== Card settings ======
+===== Card settings ======
 This menu is unique to 5D3.
@@ Line 2253: / Line 2167: @@
 //Submenu options://
-**Card test at startup**
+====Card test at startup====
-**CF card workaround**
+====CF card workaround====
-**Preferred card**
+====Preferred card====
-==== Config options ====
+===== Config options =====
 Magic Lantern saves its settings in a configuration file named MAGIC.CFG,
@@ Line 2268: / Line 2182: @@
 //Submenu options://
-**SET at startup** By enabling this ML will not be loaded at startup. Same as pressing SET during startup.
+====SET at startup====
+By enabling this ML will not be loaded at startup. Same as pressing SET during startup.
-**Config preset** Create different presets of menu configurations.
+====Config preset====
+Create different presets of menu configurations.
 ML options and settings can be overwhelming, esp. when trying to switch between different setups.
@@ Line 2282: / Line 2198: @@
 Caveat: Order of custom presets is not by alphabet/number but date of directory creation (time stamp)! Newest cames last, oldest first.
-**Config AutoSave**
+====Config AutoSave====
 Saves settings automatically to magic.cfg whenever you change a setting
 in ML menu. Config saving process will take place as soon as you close
 the menu.
-**Save config now** Save ML settings to ML/SETTINGS/MAGIC.CFG or the config preset selected.
+====Save config now====
+Save ML settings to ML/SETTINGS/MAGIC.CFG or the config preset selected.
-**Restore ML defaults** use this to restore ML default settings. After deleting the config file, restart the camera.
+====Restore ML defaults====
+use this to restore ML default settings. After deleting the config file, restart the camera.
 As mentioned above using Config Presets allows to switch numerous ML settings at once. If you want to rely on this feature make up your mind about how to change and preserve settings.
@@ Line 2303: / Line 2221: @@
 Recommended for custom presets: Backup your ML\Settings directory to a safe location. You will be able to restore settings anytime by just overwriting the troubled preset directory or all of them.
-==== Image review settings ====
+===== Image review settings =====
 Customize the image review (playback) mode.
@@ Line 2309: / Line 2227: @@
 //Submenu options://
-**Play mode actions** When you press associated "Trigger key(s)" (see below), ML may perform one of these functions:
+====Play mode actions====
+When you press associated "Trigger key(s)" (see below), ML may perform one of these functions:
 //Submenu options://
-  * **Action type**:
+===Action type===
@@ Line 2322: / Line 2241: @@
        * Exposure Adjust: ?
-     * **Trigger key(s)**
+===Trigger key(s)===
@@ Line 2330: / Line 2249: @@
-**Image Review**
+====Image Review====
   * QuickReview default: just like in standard firmware.
   * Canon Mnu:Hold->PLAY: if you set Image Review: Hold in Canon menu, it will go to PLAY mode  instead. This allows you to zoom in as soon as you take the picture  (without having to press PLAY). Credits goto Ken Rockwell for suggesting this.
-**Quick Zoom** Faster zoom in PLAY mode, for checking critical focus:
+====Quick Zoom====
+Faster zoom in PLAY mode, for checking critical focus:
   * OFF
   * ON - zooms faster than Canon firmware.
@@ Line 2341: / Line 2261: @@
   * Full Z on last pos.: similar, but it will remember the last position of the zoom box.
-**LV button** Customize the LiveView button in PLAY mode:
+====LV button====
+Customize the LiveView button in PLAY mode:
   * Default (enter LiveView)
   * Protect image
   * Rate image
-**Quick Erase** Shortcut for erasing images without confirmation (hold SET and press ERASE). Be careful!
+====Quick Erase====
+Shortcut for erasing images without confirmation (hold SET and press ERASE). Be careful!
-==== LiveView zoom tweaks ====
+===== LiveView zoom tweaks =====
 Customise zoom features.
@@ Line 2355: / Line 2277: @@
 //Submenu options://
-**Zoom x5** Disable Zoom function.
+====Zoom x5====
+Disable Zoom function.
-**Zoom x10** Disable Zoom function.
+====Zoom x10====
+Disable Zoom function.
-**Auto exposure on Zoom** Auto adjusts exposure so you can focus manually wide open.
+====Auto exposure on Zoom====
+Auto adjusts exposure so you can focus manually wide open.
-**Increase SharpContrast** Increase sharpness and contrast when you zoom in LiveView.
+====Increase SharpContrast====
+Increase sharpness and contrast when you zoom in LiveView.
-**Zoom on HalfShutter** Enable zoom when you hold he shutter halfway pressed.
+====Zoom on HalfShutter====
+Enable zoom when you hold he shutter halfway pressed.
-**Zoom with Focus Ring** Zoom when you turn the focus ring on some Canon lenses.
+====Zoom with Focus Ring====
+Zoom when you turn the focus ring on some Canon lenses.
-==== Focus box settings ====
+===== Focus box settings =====
 Determine the behaviour of the focus box.
@@ Line 2374: / Line 2302: @@
 //Submenu options://
-**Speed** Allows you to move the focus box quicker.
+====Speed====
+Allows you to move the focus box quicker.
-**Snap points** Pick points of your image to snap the box to.
+====Snap points====
+Pick points of your image to snap the box to.
-**Display** Show or Auto-Hide.
+====Display====
+Show or Auto-Hide.
-==== Arrow/SET shortcuts ====
+===== Arrow/SET shortcuts =====
 Select the features you want to adjust quickly with arrow and SET keys.
@@ Line 2387: / Line 2318: @@
 //Submenu options://
-**Audio Gain**
+====Audio Gain====
   * LEFT/RIGHT: input gain
   * UP/DOWN: output gain
   * SET: input
-**ISO/Kelvin**
+====ISO/Kelvin====
   * LEFT/RIGHT: ISO
   * UP/DOWN: white balance
   * SET: PushWB
-**Shutter/Aperture**
+====Shutter/Aperture====
   * LEFT/RIGHT: shutter
   * UP/DOWN: aperture
   * SET: 180d shutter
-**LCD Bright/Saturation**
+====LCD Bright/Saturation====
   * LEFT/RIGHT: LCD bright
   * UP/DOWN: LCD saturation
   * SET: reset
-**Use SET button** Enable functions for SET when you use arrow keys:
+====Use SET button====
+Enable functions for SET when you use arrow keys:
   * Audio input (internal mic, external mic, balanced…)
   * Push-button white balance
   * 180-degree shutter speed
   * Reset LCD brightness to 5 and saturation to Normal.
-==== Misc key settings ====
+===== Misc key settings =====
 //Submenu options://
-**LCD Sensor Shortcuts**
+====LCD Sensor Shortcuts====
 Use the LCD face sensor as an extra key in ML (e.g. for triggering arrow
 keys, for blocking follow focus or for bypassing magic zoom key).
@@ Line 2420: / Line 2354: @@
 device which covers the LCD sensor (e.g. a loupe).
-**Sticky DOF Preview**
+====Sticky DOF Preview====
 Makes the DOF preview button sticky (press to toggle). Enabling DOF
 preview will block certain buttons. Enable Exposure Override to preview
 DOF without blocking the buttons.
-**Sticky HalfShutter**
+====Sticky HalfShutter====
 Makes the half-shutter button sticky (press to toggle). Use this to
 prevent the camera from turning off LiveView after 30 minutes.
@@ Line 2431: / Line 2365: @@
-**Swap MENU ERASE** (60D)
+====Swap MENU ERASE(60D)====
 Swaps MENU and ERASE buttons. This feature allows one-handed navigation in ML
 menu on 60D, but will have to use MENU button to delete the pictures.
-**DigitalZoom Shortcut** (600D)
+====DigitalZoom Shortcut====
+(600D)
 On 600D/T3i, this lets you customize the behavior of DISP + Zoom In / Zoom Out shortcut key in movie mode:
 x,3x : toggle between 1x and 3x digital zoom modes (FullHD)
@@ Line 2442: / Line 2377: @@
-==== Warning for bad settings ====
+===== Warning for bad settings =====
 //Submenu options://
-**Mode warning** Warn if you turn the dial to another position.
+====Mode warning====
+Warn if you turn the dial to another position.
-**Quality warning** Warn if you change the picture quality.
+====Quality warning====
+Warn if you change the picture quality.
-**ALO warning** Warn if you enable ALO by mistake.
+====ALO warning====
+Warn if you enable ALO by mistake.
-**WB warning** Warn if you disable AWB by mistake.
+====WB warning====
+Warn if you disable AWB by mistake.
-**AF/MF warning** Warn on manual/automatic focus.
+====AF/MF warning====
+Warn on manual/automatic focus.
-**Warning message** Use LED and/or messagebox and/or beep to warn you.
+====Warning message====
+Use LED and/or messagebox and/or beep to warn you.
-==== Powersave in LiveView ====
+===== Powersave in LiveView =====
 Options for maximizing battery life when using LiveView.
@@ Line 2465: / Line 2406: @@
 //Submenu options://
-**Enable power saving** on Standby, during Recording, or always.
+====Enable power saving====
+on Standby, during Recording, or always.
-**Use LCD sensor** You can use it to wake up from powersave (wave your hand
+====Use LCD sensor====
+You can use it to wake up from powersave (wave your hand
 near it), or to force powersave mode (cover the sensor for a few
 seconds).
-**Use shortcut key** Shortcut key for enabling powersave modes right away.
+====Use shortcut key====
+Shortcut key for enabling powersave modes right away.
-**Dim display** In LiveView, if the camera is idle, Magic Lantern will reduce the LCD backlight level to minimum in order to save power.
+====Dim display====
+In LiveView, if the camera is idle, Magic Lantern will reduce the LCD backlight level to minimum in order to save power.
-**Turn off LCD**
+====Turn off LCD====
 This will turn off the display and the sensor activity in LiveView.
 Mirror will not be moved. If the camera is recording or motion detection
@@ Line 2481: / Line 2426: @@
 turned off (so recording will not stop).
-**Turn off GlobalDraw** If the camera is idle, ML overlay graphics will be disabled to reduce CPU usage.
+====Turn off GlobalDraw====
+If the camera is idle, ML overlay graphics will be disabled to reduce CPU usage.
-==== GPS Power Save (6D) ====
+===== GPS Power Save (6D) =====
 Force GPS into powersave mode.
@@ Line 2492: / Line 2438: @@
-==== LV Display Presets ====
+===== LV Display Presets =====
 This feature lets you create 1, 2 or 3 additional ML LiveView screens with individual Overlay presets.
-//Submenu options://
+//Values://
 **OFF (1)**
@@ Line 2515: / Line 2461: @@
-==== Lens Info Prefs ====
+===== Lens Info Prefs =====
 //Submenu options://
-** Crop Factor Display **
+==== Crop Factor Display ====
 If enabled, ML bottom bar will display the 35mm equivalent focal length, including crop factor (1.6x).
@@ Line 2527: / Line 2473: @@
   * 80eq f/1.8 with this option enabled.
-**Focus Distance Units** Choose between metric and imperial measurements for focal distance.
+====Focus Distance Units====
+Choose between metric and imperial measurements for focal distance.
@@ Line 2533: / Line 2480: @@
-==== Customize Menus ====
+===== Customize Menus =====
 > Ready for review
 Creating "MyMenu" screen for ML settings.
@@ Line 2547: / Line 2494: @@
 MyMenu settings are stored in ML\Settings (and associated config preset subdirectories). File name is MENU.CFG. If you got totally lost you may want to delete MENU.CFG to go back to default menu structure.
-//Submenu options://
+//Values://
@@ Line 2570: / Line 2517: @@
 > For discussion: AFAIK modules tab is the only screen where help texts are included in code. And - besides activating and deactivating - additional help texts including submenu descriptions serve no purpose here. So: What are we actually doing here? Help texts and listings of submenu items are needed where the menu items are. Wrong?
-==== adv_int.mo ====
+===== adv_int.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=8431.0)
@@ Line 2580: / Line 2527: @@
-==== arkanoid.mo ====
+===== arkanoid.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=7847.msg106815#msg106815)
@@ Line 2590: / Line 2537: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/arkanoid/README.rst?at=unified&fileviewer=file-view-default|arkanoid.mo readme file on bitbucket]]
-==== autoexpo.mo ====
+===== autoexpo.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=7208.0)
@@ Line 2599: / Line 2546: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/autoexpo/README.rst?at=unified&fileviewer=file-view-default|autoexpo.mo readme file on bitbucket]]
-==== bench.mo ====
+===== bench.mo =====
 Various benchmarks to determine card and camera performance.
@@ Line 2606: / Line 2553: @@
-==== deflick.mo ====
+===== deflick.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=10496.0)
@@ Line 2619: / Line 2566: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/deflick/README.rst?at=unified&fileviewer=file-view-default|deflick.mo readme file on bitbucket]]
-==== dot_tune.mo ====
+===== dot_tune.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=4648.0)
@@ Line 2638: / Line 2585: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/dot_tune/README.rst?at=unified&fileviewer=file-view-default|dot_tune.mo readme file on bitbucket]]
-==== dual_iso.mo ====
+===== dual_iso.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=7139.0)
@@ Line 2657: / Line 2604: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/dual_iso/README.rst?at=unified&fileviewer=file-view-default|dual_iso.mo readme file on bitbucket]]
-==== edmac.mo ====
+===== edmac.mo =====
 > INCOMPLETE
-==== ettr.mo ====
+===== ettr.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=5200.0)
@@ Line 2702: / Line 2649: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/ettr/README.rst?at=unified&fileviewer=file-view-default|ettr.mo readme file on bitbucket]]
-==== file_man.mo ====
+===== file_man.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=5522.0)
@@ Line 2711: / Line 2658: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/file_man/README.rst?at=unified&fileviewer=file-view-default|file_man.mo readme file on bitbucket]]
-==== lua.mo ====
+===== lua.mo =====
 > INCOMPLETE
-==== mlv_lite.mo ====
+===== mlv_lite.mo =====
 (https://www.magiclantern.fm/forum/index.php?topic=16650.0)
@@ Line 2726: / Line 2673: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/mlv_lite/README.rst?at=unified&fileviewer=file-view-default|mlv_lite.mo readme file on bitbucket]]
-==== mlv_play.mo ====
+===== mlv_play.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=7122.0)
@@ Line 2735: / Line 2682: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/mlv_play/README.rst?at=unified&fileviewer=file-view-default|mlv_play.mo readme file on bitbucket]]
-==== mlv_rec.mo ====
+===== mlv_rec.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=7122.0)
@@ Line 2780: / Line 2727: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/mlv_rec/README.rst?at=unified&fileviewer=file-view-default|mlv_rec.mo readme file on bitbucket]]
-==== mlv_snd.mo ====
+===== mlv_snd.mo =====
 //Submenu options://
@@ Line 2786: / Line 2733: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/mlv_snd/README.rst?at=unified&fileviewer=file-view-default|mlv_snd.mo readme file on bitbucket]]
-==== pic_view.mo ====
+===== pic_view.mo =====
 //Submenu options://
@@ Line 2792: / Line 2739: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/pic_view/README.rst?at=unified&fileviewer=file-view-default|pic_view.mo readme file on bitbucket]]
-==== selftest.mo ====
+===== selftest.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=5240.0)
@@ Line 2802: / Line 2749: @@
-==== silent.mo ====
+===== silent.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=5240.0)
@@ Line 2831: / Line 2778: @@
-==== Modules debug ====
+===== Modules debug =====
@@ Line 2837: / Line 2784: @@
 //Submenu options://
-**Disable all modules**
+====Disable all modules====
-**Load modules after crash**
+====Load modules after crash====
 By default (OFF) ML modules will not be loaded after a crash or after battery pull during operation. Users and developers may find setting OFF helpful to identify and disable misbehaving modules in the field.
 For unattended cameras in remote locations setting "Load modules after crash ON" might be preferable esp. if used together with some kind of watchdog timer or otherwise intermittent power source. Same for situations under stress where having time for troubleshooting is not an option.
-**Show console**
+====Show console====
-==== Benchmarks ====
+===== Benchmarks =====
 Card interface performance and other (more nerdy) tests.
@@ Line 2858: / Line 2805: @@
 //Submenu options://
-**Card benchmarks**
+====Card benchmarks====
-    * Quick R/W benchmark (1 min)
+=== Quick R/W benchmark (1 min)===
       To determine read and write performance of your card/camera combination.
@@ Line 2882: / Line 2829: @@
-    * Buffer R/W benchmark (5 min)
+=== Buffer R/W benchmark (5 min) ===
-    * Buffer write benchmark (inf)
+=== Buffer write benchmark (inf) ===
-**Memory benchmarks**
+====Memory benchmarks====
-   * Memory benchmark (1 min)
+=== Memory benchmark (1 min)===
-   * Cache benchmark (RAM)
+=== Cache benchmark (RAM)===
-   * Cache benchmark (RAM, no cache)
+=== Cache benchmark (RAM, no cache)===
-   * Cache benchmark (ROM)
+=== Cache benchmark (ROM)===
-**Misc benchmarks**
+====Misc benchmarks====
-    * Focus peaking benchmark (30s)
+=== Focus peaking benchmark (30s)===
-    * Menu benchmark (10s)
+=== Menu benchmark (10s)===
-==== EDMAC tools ====
+===== EDMAC tools =====
-**Show EDMAC channels**
+====Show EDMAC channels====
-**Find free EDMAC channels**
+====Find free EDMAC channels====
-**Log EDMAC activity**
+====Log EDMAC activity====
-    * Start logging
+===Start logging===
-    * Log every
+===Log every===
-**EDMAC model test**
+====EDMAC model test====
-==== File Manager ====
+===== File Manager =====
 //Submenu options://
@@ Line 2922: / Line 2869: @@
   * Select files in a directory based on file extension. (*.LOG, *.JPG, ...) and copy, move or delete them.
-==== Self tests ====
+===== Self tests =====
 Only visible (together with "Fault emulation") after loading selftest.mo in Modules tab.
-**Stubs API test**
+====Stubs API test====
-**RPC reliability tests (infinite)**
+====RPC reliability tests (infinite)====
-**Quick test (around 15 min)**
+====Quick test (around 15 min)====
-**Random tests (infinte loop)**
+====Random tests (infinte loop)====
-**Menu backend test (infinite)**
+====Menu backend test (infinite)====
-**Redraw test (infinite)**
+====Redraw test (infinite)====
-**Rectangle test (infinite)**
+====Rectangle test (infinite)====
-**SRM memory test (5 minutes)**
+====SRM memory test (5 minutes)====
-**Small-block malloc test (quick)**
+====Small-block malloc test (quick)====
-**Memory leak test (1 minute)**
+====Memory leak test (1 minute)====
-**EDMAC screen test (infinite)**
+====EDMAC screen test (infinite)====
-==== Fault emulation ====
+===== Fault emulation =====
 Only visible (together with "Self tests") after loading selftest.mo in Modules tab.
-**Create a stuck task**
+====Create a stuck task====
-**Freeze the GUI task**
+====Freeze the GUI task====
-**Lock-up the ARM CPU**
+====Lock-up the ARM CPU====
-**Division by zero**
+====Division by zero====
-**AllocateMemory 1MB**
+====AllocateMemory 1MB====
-**Allocate 10MB of RAM**
+====Allocate 10MB of RAM====
-==== Lens info ====
+===== Lens info =====
 **Name**
@@ Line 2981: / Line 2928: @@
-==== Screenshot - 10 s ====
+===== Screenshot - 10 s =====
 //Submenu options://
@@ Line 2993: / Line 2940: @@
-==== Dump ROM and RAM ====
+===== Dump ROM and RAM =====
 //Submenu options://
-==== Dump image buffers ====
+===== Dump image buffers =====
 //Submenu options://
-==== Don't click me! ====
+===== Don't click me! =====
 This is a placeholder in one of ML's source files for customized/temporary debugging code. By default it is empty, doing nothing at all. If needed you (or more likely: a developer) can add code inside source which has to be compiled to a customized ML build to be executed by you.
@@ Line 3016: / Line 2963: @@
-==== Show tasks ====
+===== Show tasks =====
 //Submenu options://
@@ Line 3023: / Line 2970: @@
-==== Show CPU usage ====
+===== Show CPU usage =====
 //Submenu options://
@@ Line 3039: / Line 2986: @@
-==== Show GUI evts ====
+===== Show GUI evts =====
 //Submenu options://
@@ Line 3052: / Line 2999: @@
-==== Free Memory ====
+===== Free Memory =====
 //Submenu options://
@@ Line 3059: / Line 3006: @@
-==== Image buffers ====
+===== Image buffers =====
 //Submenu options://
-==== Shutter Count ====
+===== Shutter Count =====
 //Submenu options://
@@ Line 3075: / Line 3022: @@
-==== Internal Temp ====
+===== Internal Temp =====
 //Submenu options://
@@ Line 3083: / Line 3030: @@
 Internal Temp will be shown in ML liveview screen, too. Celsius value only!
-==== Battery level ====
+===== Battery level =====
 //Submenu options://
@@ Line 3110: / Line 3057: @@
-==== Press INFO ====
+===== Press INFO =====
 //Submenu options://
-==== Press Q ====
+===== Press Q =====
 //Submenu options://
@@ Line 3120: / Line 3067: @@
-==== SET/PLAY ====
+===== SET/PLAY =====
 //Submenu options://
-==== Zoomin ====
+===== Zoomin =====
 //Submenu options://
-==== Press MENU ====
+===== Press MENU =====
 //Submenu options://
-==== Press PicStyle ====
+===== Press PicStyle =====
 //Submenu options://
-==== Key Shortcuts ====
+===== Key Shortcuts =====
 //Submenu options://
-==== Complete user guide ====
+===== Complete user guide =====
 //Submenu options://
-==== About Magic Lantern ====
+===== About Magic Lantern =====
 //Submenu options://
@@ Line 3154: / Line 3101: @@
 > Didn't check it
-==== astro.mo ====
+===== astro.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=18515.0)
@@ Line 3161: / Line 3108: @@
 //Submenu options://
-==== auto_iso.mo ====
+===== auto_iso.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=8688.0)
@@ Line 3169: / Line 3116: @@
 //Submenu options://
-==== bolt_rec.mo ====
+===== bolt_rec.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=6303.0)
@@ Line 3178: / Line 3125: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/bolt_rec/README.rst?at=unified&fileviewer=file-view-default|bolt_rec.mo readme file on bitbucket]]
-==== foc_inf.mo ====
+===== foc_inf.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=7189.0)
@@ Line 3185: / Line 3132: @@
 //Submenu options://
-==== gps.mo ====
+===== gps.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=11209.0)
@@ Line 3193: / Line 3140: @@
-==== ime_base.mo ime_rot.mo ime_std.mo ====
+===== ime_base.mo ime_rot.mo ime_std.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=6899.0)
@@ Line 3204: / Line 3151: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/ime_std/README.rst?at=unified&fileviewer=file-view-default|ime_std.mo readme file on bitbucket]]
-==== io_crypt.mo ====
+===== io_crypt.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=10279.0)
@@ Line 3213: / Line 3160: @@
 [[https://bitbucket.org/hudson/magic-lantern/src/unified/modules/io_crypt/README.rst?at=unified&fileviewer=file-view-default|io_crypt.mo readme file on bitbucket]]
-==== sen_cle.mo ====
+===== sen_cle.mo =====
 (http://www.magiclantern.fm/forum/index.php?topic=8217.0)
@@ Line 3248: / Line 3195: @@
 Parking lot for items lost in transition
-==== Rack Delay ====
+===== Rack Delay =====
 > OBSOLETE?
@@ Line 3257: / Line 3204: @@
 This lets you film the start point first, then initialise the rack focus without touching the camera.
-==== Focus ... ====
+===== Focus ... =====
 Recommended focus step settings:
 Focus StepSize: 1 or 2
@@ Line 3270: / Line 3217: @@
 Press PLAY again to go back.
-==== Rack Focus ====
+===== Rack Focus =====
 > Explanation belongs in "Focus End Point"
@@ Line 3296: / Line 3243: @@
-==== Bulb/Focus Ramping ====
+===== Bulb/Focus Ramping =====
 > INCOMPLETE