Magic Lantern wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Camera Help for nightly builds ======

This page is intended as source for the camera help files. Please don't include other stuff in the menu related sections below.
 
The text was transferred from https://www.magiclantern.fm/forum/index.php?topic=11269 and is by no means up to date or complete. Many sections just duplicate the text that is displayed in the footer of the camera display anyway. This needs to be enhanced of course. Please mention known incompatibilities, caveats etc.

Please anyone: Login to the wiki with the same credentials as for the magic lantern forum and add or correct wherever you see something missing or outdated. 

As a first step it would be already helpful to mark outdated sections by editing the section and add a comment like that: <code>> INCOMPLETE</code> which would show as 
> INCOMPLETE 
in the wiki. You can also add some hints what is missing as a comment. Subcomments are possible, see [[wiki:syntax#quoting]]. It is also possible to tag complete sections with a <code>> COMPLETE</code> comment. 

Don't be afraid of making mistakes. It is far more important to provide content since fixing mistakes is much easier than writing help texts.

For the time being restrict the formatting to simple text with only basic formatting like headlines, bold or italic text, bulleted or numbered lists, since it will be converted to ReStructured Text in time to be used on the camera display. For that the text will be split into separate files on level 2 section headings (f.e. <nowiki>===== Audio =====</nowiki>), so please restrict your headings to levels 3 to 5. Tables and images are currently not supported. 

Please use the edit button for the respective section above that button and use the preview feature. This helps to keep the revision list tidy.

> Update (18.02.2019) Walter Schulz
> Listings (= menu items) should be complete and up-to-date by now. If not: Report back!\\
> Task for all readers: Check for errors, misconceptions, blank fields, unhelpful items (overcomplicated or just missing help). Think of everything you can imagine an in-camera help should include!
> Special task: HDR section! If you have experience with HDR workflow, preferable with Open-Source tools (but not restricted to), any input would be appreciated!


>Update (25.02.2019) Walter Schulz\\
>Updated "Focus" section.
>Missing: Proper help for Focus Settings/stepping.
>Don't think I will describe the full FRSP+Expo.Override/Sticky DOF+Focus stacking workflow here. More suited for a tutorial IMO.\\
>Updated Auto exposure a bit. EC parts still missing.\\
>HDR section untouched. Task still valid, copying from above
> Special task: HDR section! If you have experience with HDR workflow, preferable with Open-Source tools (but not restricted to), any input would be appreciated!\\

>Update (09.05.2021) Michael Hardy\\
>Updated "Audio" section.
>Notably that MLV_REC.mo must be loaded before MLV_SND.mo for MLV_SND to work and be an Audio Menu Option.
>Some 650D and 550D specific observations. (e.g. No wind filter option on 550D.\\
>Query Exposure Menu. Shutter range values.\\
>Update Overlay Menu: Magic Zoom for specific trigger options for the 650D and 550D. Update absence of focus confirm option for 650D.
> Update Overlay Menu. Level indicator not available for 650D, 550D.\\

===== Audio =====

> Complete (18.02.2019). No pics for plugs, etc. here, because it's in-camera help and drawings for soldering doesn't help that much in this respect, IMO. 

> And if Audio screen isn't visible this help text won't be able to tell users why. That's one reason I opted for this screen to be visible at all times.

Manual audio controls.\\ If you do not see this screen check these conditions:
  * 50D: Nope, no way to make it happen! 50D doesn't support audio recording.
  * 5D Mark III, 6D, 70D, 100D, 650D, 700D, 1100D, 1200D, EOS M, EOS M2\\ Your cam may have restricted audio menu only after loading module MLV_SND.mo. The only menu option you will see with MLV_SND active:\\ - MLV Sound.\\ MLV_REC is needed to make MLV_SND run. If you load MLV_SND.mo without MLV_REC.mo, all modules will fail to load.\\ In case of improper shutdown ML modules will not be loaded (by default) and therefore you won't see this menu item. Restart your cam. See [[#https://wiki.magiclantern.fm/camera_help#modules_debug|Modules Debug -> Load modules after crash]] for details.

The options available differ a lot depending on your camera type.\\ Please check [[https://builds.magiclantern.fm/features.html#Audio|feature matrix]]


==== Analog Gain ====

Gain applied to both inputs in the analog domain.

//Submenu options://

**0-32 dB**

Analog does a great job of boosting the signal while retaining a low noise
floor and hence, [[http://www.magiclantern.fm/forum/index.php?topic=8549.0|dynamic range.]] If you use an
external preamp, set this parameter as low as possible otherwise, set it
as high as possible without [[http://www.magiclantern.fm/forum/index.php?topic=11063.0|clipping]] (audio meters
should be green).


==== Digital Gain ====

In-camera digital gain.

//Submenu options://

**Left Digital Gain** 0 to 36 dB in 6 dB increments

**Right Digital Gain** 0 to 36 dB in 6 dB increments

**AGC** ON or OFF

Applying digital gain in-camera is not recommended as any non-zero value reduces
audio quality and you can achieve the same effect with more control in
post, but it can serve as an evaluative tool on set. You can apply
digital gain in 6dB increments to the left and right channel
independently. AGC is auto mode and is applied only in digital domain.
It overrides digital gains, but you can still adjust analog gain.


==== Input source ====

Mic configurations.

//Submenu options://

**Internal mic** your camera's internal mic(s)

**L:int R:ext**

**External stereo**

**L:int R:balanced** (internal mic on Left, external mic on Right from both external pins as balanced audio)

**Auto int/ext** camera detects if a mic is plugged in. Int is dual mono, ext is stereo.

Balanced audio allows for very long cable runs without interference. Usually
balanced mics have three pin XLR connectors and it is very easy to put
together an XLR to Canon mic input cable. Balanced allows us to use such
pro mics with our little Canons and this is a very welcome surprise for
audio guys. You can feed an [[http://www.magiclantern.fm/forum/index.php?topic=1944.0|external audio source]] into the
camera giving you the option of using higher quality mics, although this
is not [[http://www.magiclantern.fm/forum/index.php?topic=8836.0|straight forward.]]


==== Wind Filter ====

Digital high-pass filter.

//Submenu options://

**On or Off**

Canon's audio controls have no effect, they are completely overridden by ML and
the wind filter has been known to mute external mics, so if you're
having that problem on an earlier build turn it off. [[http://www.magiclantern.fm/forum/index.php?topic=4234.msg27693#msg27693|To use or not?]]
Also see [[http://www.akm.com/akm/en/file/datasheet/AK4646EN.pdf|AK4646 datasheet p.34.]]


==== Mic Power ====

Power for mics.

//Submenu options://

**ON** input impedance is 2 kOhm.

**OFF** input impedance is 30 kOhm.

Required for internal mic and certain types of external mics, but it reduces
input impedance. This setting is always ON when input source is either
internal mic or L:int R:ext. See[[http://www.akm.com/akm/en/file/datasheet/AK4646EN.pdf| AK4646 datasheet p.31.]] and the Mic
power control thread. [[http://www.magiclantern.fm/forum/index.php?topic=2666.0|Results of audio tests with ML and Canon 550D, T2i.]]


==== Headphone Mon. ====

Audio monitoring with headphones, using the A/V cable.

//Submenu options://

**On or Off**

To use audio monitoring, you need a special cable: your Canon A/V cable
with a RCA - 3.5mm jack adapter a dedicated cable from Sescom or you may
solder it yourself (you will have to cut your A/V cable). Mobile phone
cables will not work; even if the connector looks similar, it's not
identical. You must use the original cable which came with your camera.
For details, see Audio monitoring HOWTO on Vimeo group. Disable this
setting if you are using a SD monitor. This feature is not available on
600D/T3i.

Tip: Before cuting/soldering or ordering a monitoring cable check [[https://builds.magiclantern.fm/features.html#Audio|feature matrix]] if this feature is available for your cam at all.

==== Headphone volume ====

Digital output gain for audio monitoring.

//Submenu options://

**0 dB**

**2 dB**

**4 dB**

**6 dB**

It does not have any effect on the internal camera speaker. For best
results, you should a pair of low impedance headphones, for example
Audio Technica ATH-M50 (38 ohms). With high-impedance headphones, you
may have to use a headphone amplifier like FiiO E5.


==== Audio Meters ====

Display the input audio level.

//Submenu options://

From -40dB to 0dB, meters become yellow at -12 dB and red at -3 dB. Audio meters are only displayed in movie mode.


==== Speaker Volume ====

In-camera speaker.

//Submenu options://

**1 to 5**


==== Beep, test tones ====

Customize camera sounds.

//Submenu options://

**Enable Beeps** ML uses beep tones for several events. Turn them off if you have to go silent.

**Tone Waveform** Sine tones of lower frequency might be not audible on the internal speaker. Use square. Always check with Test beep sound.

**Tone Frequency** Default is 1 kHz. Range from 55 Hz (A1) to 12 kHz. Human ears are considered to be most sensitive between 2 and 5 kHz.

**Play test tone**

**Test beep sound**


==== MLV Sound ====

Only available when the [[#mlv_sndmo|MLV_SND]] module is loaded and active. See
[[#modules|Modules]]

//Submenu options://

**Sampling rate** 8 - 48kHz the basic quality of your audio, the higher the better.

**Trace output** ON or OFF

When MLV Sound is ON, a separate WAV file is generated at the framerate
determined by your FPS setting in Canon Menu. When FPS Override is used,
only the framerate of raw video is affected, the WAV file will remain
either 24fps or 30fps depending on the FPS setting in canon menu. It is
not possible to playback mlv sound in-camera.




===== Expo =====

Adjusting the exposure parameters. Most of these settings only work in Manual
(photo and video) but some work in P, Av and Tv too. For availability see [[https://builds.magiclantern.fm/features.html#Expo|feature matrix]]
Some items will only be shown after loading the appropriate module in the Module screen:
  * Auto ETTR: ettr.mo
  * Dual-ISO: dual_iso.mo
  * Auto exposure: autoexpo.mo

The following settings are linked to Canon settings. If you change them here, the changes will appear in the Canon menu too and vice versa.
  * White Balance
  * ISO
  * Shutter
  * Aperture
  * Picture Style

==== WhiteBalance ====

White balance controls.

//Submenu options://

**White Balance:** Rated in Kelvin, allows manual adjustments from 1500K to 15000K.

There is no "AWB" option here. If you want to use AWB you have to re-enable it in the Canon menu.

**WBShift G/M:** Green-Magenta white balance shift. Useful for fluorescent lighting.

**WBShift B/A:** Blue-Amber white balance shift. 1 unit = 5 mireks on Kelvin axis, according to [[http://www.openphotographyforums.com/forums/archive/index.php/t-5450.html|this post]].

**Custom RGB multipliers:** Fine-tune custom white balance.

**Auto adjust Kelvin + G/M:**
In LiveView, ML will compute the white balance for the current scene using the center (200×200 pixels rectangle) as reference gray.

Preferred method is manual White Balance, but when shooting raw video
this is more of evaluative tool as you have control of your WB later.
Best practice is to have a reference colour at the beginning of each
shot, with neutral grey being preferred to white because whites can
blow out and give a false reading.


==== ISO ====

> INCOMPLETE

Advanced ISO control.

//Submenu options://

**Equivalent ISO:** Overall ISO rating.

**Canon analog ISO:** 100 to 3200 ISO at which the sensor is driven.

**Canon digital ISO:** Digital ISO is the process of pulling or pushing your analog ISO to affect detail.
Requires "Exp. Override ON" (see below in Expo screen).

For best image quality, it is strongly recommended to leave this set to 0 EV.


**ML digital ISO (DIGIC):**
-2 to +7 EV 
Preferred to the Canon implementation, in movie mode.
Negative values will reduce noise, but may cause color issues in highlights. 
This feature enables ISO 25 or 50, ISO 51200 and many other intermediate or astronomical ISOs.

==== Shutter ====

> INCOMPLETE

Fine-tune shutter speed.

//Submenu options://

**1/31 - 1/3900** Without Expo.Override enabled

**1/24 - 1/7900** With Expo.Override enabled


In photo mode, Magic Lantern displays shutter values rounded to 2
significant digits, so 1/48 may be displayed by ML as 1/50. This is not a
bug. In movie mode, shutter values are displayed with 3 decimal places
for example, in PAL mode, Canon uses 1/33.333 to avoid flicker. To use
shutter speeds normally not available in Canon firmware like 1/25 or
1/8000 in movie mode, enable [[http://www.magiclantern.fm/forum/index.php?topic=4055.0|Expo.Override]]. The shutter
can be locked (perfect for video) in the Movie Tweaks section of the
[[#movie|Movie]]
menu, meaning you have to go into the ML menus to change it.

 


==== Aperture ====

Adjust aperture.

//Submenu options://

Requiring a chipped lens, when Expo.Override is enabled, you can adjust in 1/8 stop increments.

It's one of two option for EF lenses to work stopped down with Silent Pics and the only option not blocking buttons. With "Expo. Override ON" by changing aperture here (it will **not** work from within Canon menu) lens blades will instantly adjust to the chosen aperture number. \\
Disclaimer: Issue #2929, not working with STM and other contemporary lens designs.


==== PictureStyle ====

Change picture style or adjust its parameters.

//Submenu options://

**Picture Style**

**Sharpness**

**Contrast**

**Saturation**

**Color Tone**

**REC-PicStyle**

You can use a different picture style when recording (toggled
automagically). May be useful with flat picture styles. Raw video makes
no use of this feature.
This setting will not be shown in the Canon menu! At the beginning of recording a notification about the REC-PicStyle selected will be seen.


==== Auto ETTR ====


Automatically expose to the right.
Only visible after loading ettr.mo in Modules.tab.
ML needs LiveView to compute camera settings according to environment!

[[https://wiki.magiclantern.fm/ettr|ETTR wiki]]
> this wiki entry is massive! Copying it here makes little sense, IMO. Extracting basics?

> Text bit copied from ettr.mo Readme
ETTR is a technique that optimizes your exposure for raw shooting, with the goal of minimizing noise without accidentally blowing the highlights.

Auto ETTR will adjust the exposure for you until the histogram will touch the right side, but - whenever possible - without clipping. This will minimize image noise for your given set of restrictions (e.g. slowest shutter, max ISO, or what highlights can be clipped).

You will usually have to darken the image in post (which is good).

Tip: on the raw histogram you will see an ETTR hint that can be used for manually exposing the image.


//Submenu options://

**Trigger mode** Always ON, Auto Snap, Press SET & HalfS DblClick. Method for executing Auto ETTR.

**Slowest shutter** 32" to 1/4000. Set your lowest speed.

**Exposure target** -0.5, -1, -2, -3 & -4EV. -0.5 or -1 recommended.

**Highlight ignore**
0 to 50%. Percentage of bright pixels allowed above target level.
Use this to allow spec(ta)cular highlights to be clipped.
Example: In standard situations with the sun in frame it makes no sense to prevent the sun from being blown out because the rest of the pic will be vastly underexposed. The same for the sun reflected off polished metal and similar situations with extreme highlights.

**Allow clipping** OFF, Green channel & Any channel. Choose which channels to be clipped.

**Midtone SNR limit** 0 to 8EV. Stop underexposing when at least 50% of the image gets noisier than selected SNR.

**Shadow SNR limit** 0 to 6EV. Stop underexposing when at least 5% of the image gets noisier than selected SNR.

**Link to Canon shutter** Hack to adjust the slowest shutter from main dial.

**Link to Dual ISO**
Let ETTR change Dual ISO settings so you get the SNR values in mids and shadows. This will disable dual ISO if it is not needed.

**Show metered areas** Show where the white point and SNR levels are metered (what exactly are considered highlights, midtones and shadows).

**Allow beeps**

**Show debug info** For nerds.

See ettr.mo in [[#modules|Modules]].

==== Expo. Lock ====
> COMPLETE

In M mode this settings lets you change Tv, Av or ISO without changing exposure. 

Locks different exposure controls in M mode. 

//Submenu options://

**Tv** You can adjust Tv as desired and ML will adjust ISO and/or Av accordingly to keep exposure constant.
  * OFF - Disables exposure lock.
  * Av, ISO - Change Av first. Tries to keep ISO constant.
  * ISO, Av - Change ISO first. Tries to keep Av constant.

**Av** You can adjust Av as desired and ML will adjust ISO and/or Tv accordingly to keep exposure constant.
  * OFF - Disables exposure lock.
  * Tv, ISO - Change Tv first. Tries to keep ISO constant.
  * ISO, Tv - Change ISO first. Tries to keep Tv constant.

**ISO** You can adjust ISO as desired and ML will adjust Tv and/or AV accordingly to keep exposure constant.
  * OFF - Disables exposure lock.
  * Tv,Av - Change Tv first. Tries to keep Av constant.
  * Av,Tv - Change Av first. Tries to keep Tv constant.

==== Expo. Presets ====
> COMPLETE
Toggles  exposure presets (ISO, shutter, aperture).

//Submenu options://

**OFF** - disables exposure presets.

**Press SET** - assigns the SET button to the exposure preset function.

**Press INFO** - assigns the INFO button to the exposure preset function.

Usage: Press the assigned button once then adjust ISO/shutter/aperture as desired. Subsequent presses of the assigned button will toggle back and forth between the
original and adjusted exposure settings.
  * Both exposure settings may be changed anytime and are changed on the spot.
  * "Expo. Presets OFF" will not change preset contents. If you enable this option again your "old" settings are there. This is true for Power Off, too.


==== Dual ISO ====
> INCOMPLETE

Capture using 2 different ISOs in a single picture for better detail in certain ranges.
Only visible after loading dual_iso.mo in Modules screen tab.

[[https://www.magiclantern.fm/forum/index.php?topic=7139.0|Dual ISO thread]]

Increases dynamic range by sampling the sensor at two different ISOs, switching ISO for every other line pair. This trick cleans up shadow noise, resulting in a dynamic range improvement of around 3 stops, at the cost of reduced vertical resolution, increased aliasing and moire in the highlights and shadows.

Works for both raw photos (CR2) and raw videos (DNG). You need to postprocess these files with a tool called cr2hdr.
> To do: List other postprocessing tools

After postprocessing, you will get a DNG that looks like a dark ISO 100 shot, but you can bring the exposure back up and be delighted by how little noise is present in those recovered shadows.


Quick start
  *Start at ISO 100 in Canon menu
  *Expose to the right by changing shutter and aperture
  *If the image is still dark, enable dual ISO
  *Adjust recovery ISO: higher values = cleaner shadows, but more artifacts
  *Try not to go past ISO 1600; you will not see any major improvements, but you will get more interpolation artifacts and hot pixels.


Tips and tricks
  *Do not use dual ISO for regular scenes that don't require a very high dynamic range.
  *Raw zebras are aware of dual ISO: weak zebras are displayed where only the high ISO is overexposed, strong (solid) zebras are displayed where both ISOs are overexposed.
  *Raw histogram will display only the low-ISO half of the image (since the high-ISO data is used for cleaning up shadow noise).
  *For optimal exposure (minimal noise without clipped highlights), try both dual ISO and ETTR.
  *Do not be afraid of less aggressive settings like 100/400. They are almost as good as 100/1600 regarding shadow noise, but with much less aliasing artifacts where only one of the chosen ISO's captures usable signal.
  *Be careful with long exposures, you may get lots of hot pixels.



//Submenu options://

**Recovery ISO** - The secondary ISO used for recovery

**Dynamic range gained** - Expected increase in Dynamic range with the current recovery ISO

**Midtone overlapping** - The midtone area where both ISO's capture data without overexposure or excess noise.

**Alternate frames only** - only enable dual ISO every second frame.

**Custom file prefix** - changes the filename prefix to help identify dual ISO images when post-processing.

See dual_iso.mo in [[#modules|Modules]].


==== Expo. Override ====

This mode bypasses Canon exposure limitations for ISO, Tv & Av.

//Submenu options://

**OFF**: Canon default exposure mode.

**ON**: ML overrides exposure values (change them from Expo menu).

**Auto**: ML enables it only when needed.
  * Manual video exposure controls - 500D/50D/1100D.
  * Non standard shutter speed, aperture or ISO - 550D/60D/600D/5D2.
  * Fix LiveView underexposure bug with manual lens - 60D.
  * 1/25s in movie mode (24p/25p) ? 1/3 stops better in low light.
  * 1/8000s in movie mode, useful for slow motion.
  * ISO 12800 is allowed in movie mode on 60D and 600D.
  * Full-time DOF preview in photo mode, without blocking certain keys. > Looks like another bug report knocking at the door. D5 issues with lens liveview update again, I suppose.

In photo mode, anything slower than 1/25 seconds will be underexposed in
LiveView. Low framerates in FPS override have fixed shutterspeeds. To
compensate, exposure adjust aperture and ISO. In the daytime this is tough
as even at ISO 100 with the lens closed down the image can be overexposed.
For these situations, consider using a VARI-ND filter.


==== ExpSim ====

Enabling/disabling Exposure Simulation in LiveView

//Submenu options://

In entry level cams (xxxD/Rebel) there is no option in Canon menu to disable Exposure Simulation. Without ML it may enforce some additional steps to get exposure settings you need. 

==== LV Display (5D Mark II) ====

5D Mark II only!
Setting LiveView options and enabling movie mode conveniently from ML menu instead of Canon menu.

//Submenu options://

**Photo, no ExpSim**

**Photo, ExpSim**

**Movie**

==== Auto exposure ====
> To do: EC stuff

Automatic control of your exposure during a take.\\ 

"P mode on steroids" by pravdomil.\\
You always wanted taking pics slightly stopped down because wide open your lens is a tad too soft? Here you go!\\
Avoiding blurred photos in sports? Set maximum exposure time!

Only visible after loading autoexpo.mo in Modules tab.\\
https://www.magiclantern.fm/forum/index.php?topic=7208.msg60545#msg60545


//Submenu options://

Auto Exposure uses APEX values!

**Show graph** ON

{{:autoexpo.png?360|}}
   Red: Exposure duration
   Green: Aperture
   Blue: ISO
   Orange: Exposure Compensation
   x-axis: Light (Brightness Value = BV). Left: Bright light. Right: Darkness










**Use in LV**

**Lens Aperture**

**TV minimum** sets the **maximum** shutter value. Yes, it's a menu bug. But it's what you want avoiding motion blur in sports and other action shootings.

**Same TV curve**

**AV range** sets aperture range, if it not match with current lens, it doesn't matter, it will be compensated with shutter

**AV curve** by main dial you set point where will start aperture decreasing (in BV value)
speed dial sets how much will be aperture decreased, it sets the slope (minus EV per one BV)

**ISO range** 100 - 25600 make sure that you set correct ISO range (you can set this values via Canon ISO menu), otherwise you can get incorrect exposure. It also solves the 5D2 auto ISO bug, where is ISO hardcoded to 400.

**ISO curve** by main dial you set point where will start ISO increasing (in BV value)
speed dial sets how much will be ISO increased, it sets the slope (plus EV per one BV)

**EC**

**EC range**

**EC curve**

**Browse** Works with "Show graph ON" and is non-persistent. You will get a movable vertical line inside your graph. Top line shows chosen BV value and bottom line lists shutter time, aperture, ISO and EC for given BV.

{{:autoexpo2.png?400|}}

Instructions\\
Graph\\
Here are a few BV values you can get:\\
^BV value ^Environment ^
|16  |Light sand or snow  |
|16 - 13  |Daylight  |
|13 - 8  |Cloudy, shade  |
|8 - 1  |Indoor  |
|< 1  |Low light  |
|-12  |Complete darkness  |
[[http://en.wikipedia.org/wiki/Exposure_value#Tabulated_exposure_values|full list]]\\
graph shows what combinations will be used depending on light conditions (on BV)
last BV value of current scene is marked with the cyan line
shutter value is computed dynamically as BV - AV + SV - EC





===== Overlay =====

Graphics overlays that can be used in LiveView or in image review mode:
histogram, zebras, cropmarks, spotmeter, focus peaking, false color…

You can create and configure up to 4 individual ML LiveView screens which may be toggled by INFO button, too. If you want to have 2, 3 or 4 go to Prefs screen -> LV Display Presets and change number accordingly. To determine which screen is active: Text field shows "DISP 0" to "DISP 3" in LV. Same number will be shown in Overlay screen.

Overlays do affect processor performance. Doing high performance write operations (as in RAW/MLV movie recording) it is adviced to reduce "active" overlays or surpress them at all during recording. You will find a lot of options affecting the appearance of overlays for that reason.

Same applies to streaming and recording via HDMI. Be aware it might take some time to find a workflow and appropriate settings for your needs.


==== Global Draw ====

Choose when to enable Magic Lantern overlay graphics such as zebras,
cropmarks, histograms, audio meters and other ML shooting info. \\

//Submenu options://

**OFF** It will not affect overlays generated by Canon firmware like Grids and focus rectangles! 
If you want to disable those -> [[#Clear overlays]]

**Liveview**

**QuickReview** (photo mode outside LiveView)

**ON, all modes**

If you used display presets, press Q on this item to switch the presets while you are in ML menu.

Be aware there are 2 other menu options influencing Overlay visibility:
- Display screen -> Clear overlays
- If MLV_REC module is used there is an option "Global Draw" and default is OFF! Computing overlays will reduce cam's storage interface write rate.
==== Zebras ====

Enable/disable zebra stripes, which indicate overexposed or underexposed areas.

//Submenu options://

**Color Space:**
  * Luma: zebras are computed from Y channel only.
  * RGB: check overexposure for each RGB channel. Clipped channels are displayed in the opposite color (i.e. clipped red shown as cyan, underexposed as  white and so on).
  * Luma Fast: Zebras are processed by display processor (similiar to [[#lv_digic_peaking|Digic Peaking]]) and do not use sparce CPU processing resources. They come with limitiations: Only able to show over- **or** underexposure, not both at the same time as "Luma" does. And not working for RAW! 

Color Space settings apply to JPG/H.264 only. RAW is not affected.\\

**Underexposure** - JPG only.  Set the RGB point where underexposure zebras are displayed.

**Overexposure** - JPG only.  Set the RGB point where overexposure zebras are displayed.

**When recording** - Show or hide zebras while recording.

**Use RAW zebras** - Enable raw based zebras.  This uses the raw sensor data for zebras.

  * Off - Disable raw zebras.
  * Always - Always show raw zebras, including in live view mode.
  * Photo only - Only show raw zebras in image review.

**Raw zebra underexposure**

  * OFF - 0EV <> +4EV

This allows you to choose at what exposure the underexposure zebras will be displayed.  0 EV means that the zebras will be displayed where the amount of noise in the image, is equal to the amount of signal in the image (the noise floor). 
A general consensus among photographers, is that the limit for acceptable amount of noise in images, is 2 EV above this noise floor.

**NOTE:**

Dual ISO zebras:  When using dual ISO, there are dual exposures and the zebras reflect this.  With dual ISO there are two types of zebras. 
  * Full/solid zebras which work exactly like normal zebras, and describe overexposure in both ISOs. 
  * Half/stripe zebras which represent overexposure only in the higher ISO.


==== Focus Peak ====

Focus assist function.

//Submenu options://

**Filter bias:**
  * Strong edges
  * Balanced
  * Fine details

**Display type:**
  * Blinking dots
  * Fine dots
  * Alpha blend
  * Sharpness
  * Raw

Alpha blend will be laged.

**Threshold:** how many pixels are considered in focus (percentage).

**Color:** either fixed color, or a color coding according to focus intensity.


**Grayscale image:** if enabled, LiveView will displayed as grayscale, but still recorded as color.

High-contrast lines will be marked by blinking dots (or other setting from "Display type") showing which part of the image is in focus. To see how it works, check this [[http://www.luminous-landscape.com/forum/index.php?topic=56246.0|article]] from
Luminous Landscape.


==== Magic Zoom ====

Displays a zoom box for focus assist. Can be used while recording.

//Submenu options://

**Trigger mode**
  * FocusR+HalfS: triggered by turning the focus ring, or by pressing shutter halfway.
  * Focus+ZREC: triggered by turning the focus ring, or by pressing Zoom In while recording.
  * Zoom In (*): triggered by Zoom In button (overrides Canon's default zoom  modes). To bypass magic zoom, press both zoom buttons at the same time  or cover the LCD sensor.
  * Always On: no trigger key needed. You can use both Canon's 5x/10x zoom and Magic Zoom.

**Size** Size of zoom box: Small, medium or large

**Position**

**Magnification** 1:1, 2:1 or 3:1

**Focus confirm** When ML believes you have achieved perfect focus, Magic Zoom will display a focus confirmation:

  * Green Bars
  * Split Screen: when the image is out of focus, the zoom box looks like a split focusing screen from old film cameras.
  * Split Screen with ZeroCross: will reverse the split direction whenever you achieve perfect focus.
Zebras,
focus peaking and false color are disabled automatically when the zoom
overlay is active. Focus triggering only works with lenses that report
Focus distance, or when you use follow focus / rack focus. In some
modes, half-pressing the shutter may temporarily hide the zoom overlay.
Original implementation: Magic Circles by AJ.


==== Cropmarks ====
[Incomplete]
Do to: 
- Status of "Cropmark Repository"? http://www.sawomedia.de/magiclantern/cropmarks/
- Passport cropmark. Replacing by newer (not neckless) version?

Cropmarks/custom grids for framing and composition.

{{:crop.png?400|}}

//Submenu options://

**Bitmap (1/9)**
Up to nine different cropmarks supported. Second number will show number of cropmarks actually available. 
Currently there are 5 cropmarks supplied with nightly builds:
  * CineSco2
  * CrssMtr2
  * Passport
  * PhiPhoto
  * PhiVideo

**Show in photo mode**

**Show in PLAY mode**

If you use custom cropmarks, place them in ML/CROPMKS folder on your SD
card and give them names following 8.3 naming convention. Example: MyCrop01.bmp. You can place at most 9 cropmarks on
the card. Get more cropmarks from the ML cropmark repository or draw
your own. http://magiclantern.wikia.com/wiki/Cropmarks

Be aware about cropmarks not scaling when switching to "Crop mode" and/or changing aspect ratio!
Grids activated by "Grid display" in Canon menu will interfere with ML's cropmarks. It's recommended not to use both at the same time.

==== Ghost image ====

Shows a transparent overlay which can be created from any image in Play mode.

//Submenu options://

**Auto-update**

To select the image, go to Play mode and press the LiveView button. Move
the ghost image in LiveView with arrow keys; center or hide it with SET
or joystick press.




==== Spotmeter ====

Measure brightness from a small spot in the frame.

//Submenu options://

**Spotmeter Unit**
  * Percent - 0 to 100%.
  * 0..255 - 8 bit RGB levels.
  * RGB (HTML)- Displays HTML-like color codes.
  * RAW (EV) - Exposure level from sensor saturation using raw sensor data.
  * RGB (Percent) - RGB colors in percentag.
**Spot Position**
  * Focus box - Spot meter linked to the focus box.
  * Center - Spot meter linked to the center of image.

==== False color ====

This is a tool for evaluating the exposure.

{{:false.png?400|}}

//Submenu options://

**Marshall**

**SmallHD**

**50-72**

**67-72**

**Banding detection**
Enables fast check if there are under- or overexposed areas. Everything else is greyed out.

**GreenScreen**
Enables fast check if green screen conditions (uniform lighting) are met. 

It shows different luma (Y) levels using a color map. You may configure a
display preset with False Color and toggle it with a single button
press. You may also use false colors to highlight 50% and 70% brightness
levels, or to reveal color banding, or to check for uniform green
screen lighting.


==== Histogram ====

This exposure tool will show the distribution of image brightness levels in a histogram.

//Submenu options://

**Histogram type**
  * YUV-based, Luma
  * YUV-based, RGB
  * RAW-based (RGB) > To do: Pic example, basic functions included
  * RAW HistoBar (MAX)
**RAW EV indicator**
  * OFF - Don't use the indicator.
  * Dynamic Range - Displays ynamic range at current ISO, from noise stdev.
  * ETTR hint - Show how many stops you can push exposure to the right.
**Scaling**
  * Log
  * Linear
**Clip warning**
- Display warning if the histogram with clipping.  This will
display a warning for each color channel, when that channel is being
overexposed.  Numbers represent the percentage of pixels being
clipped.

To learn how to read these graphs, see [[http://www.luminous-landscape.com/tutorials/understanding-series/understanding-histograms.shtml|Understanding Histograms]].




==== Waveform ====

> To do: Waveform image 

**Waveform Size**

//Submenu Options://

**Small**

**Large**

**FullScreen**

To learn how to read these graphs, see [http://www.youtube.com/watch?v=JXMvFk146R0|Final Cut Waveform Monitor]].

==== Vectorscope ====

This tool shows the color distribution with an U-V plot.

//Submenu options://

**UV scaling**

Useful for color grading. To learn how to read it, see [[http://www.kdenlive.org/users/granjow/introducing-color-scopes-vectorscope|Introducing Color Scopes: The Vectorscope]].


==== Level Indicator ====

//Submenu options://

Will show an electronic level indicator in Liveview ML screen, supported by a numerical display on the upper left. Resolution is 0.5 degrees. Indicator is available if supported by Canon. For those cams equipped with a dual-axis level indicator there is no numerical display for second axis.



===== Movie =====

Functions specific to movie mode.


==== Bit Rate ====

Controls H.264 bitrate used for video recording.

//Submenu options://

**Mode**

  * CBR is constant bitrate. You specify a factor for multiplying default video bitrate, between 0.1x and 3.0x. CBR 1.0x is the firmware default  setting. CBR actually works by adjusting QScale on the fly; the instant  value is displayed near the recording dot.
  * QScale is constant quality, variable bitrate (VBR). Available values are -16 to +16. Lower  numbers mean higher bitrates, but it's not as stable as CBR and  increasing the bitrate may cause recording to stop. You need a fast  card. In QScale mode, bitrate is completely out of control (don't use  it!).
  * Firmware default completely disables bitrate control.

**CBR factor** 0.1x to 3.0x.

**QScale** -16 to 16.

**Bitrate Info** ON or OFF.

**BuffWarnLevel** 30 to 100.

In CBR mode, QScale will not go outside [-16…+16]. When QScale reaches the
extreme values (-16 or +16), bitrate will be different than your CBR
setting. Watch the bitrate indicators. This is not a bug, please do not
report it. You can push the bitrate higher if you record without sound,
then use Audio RemoteShot to sync the video with an external audio
track. You can't change this setting during recording. If buffer usage
gets too high, ML will pause all CPU-intensive graphics. Change the
BuffWarnLevel setting to customize this.

==== Movie Record (50D) ====

//Submenu options://

Enable movie recording on 50D (1920×1080, 30fps, without sound). To start
recording, go to LiveView (P/Tv/Av/M) and press SET. WARNING: Canon 50D
was NOT designed to record movies. Keep in mind: This feature was not
thoroughly tested by Canon and may be unstable (even if you record
without ML). Always disable movie recording when you don't use it.
Battery will drain quickly when recording; also, the camera may
overheat.

Limitations: The camera will not record sound. You can
use an external recorder (for example, Zoom H1, H2 or H4n) and sync the
sound in post with a clapperboard. You can't play back movies in the
camera. This setting remains active even if you start the camera with
standard firmware (until you clear your settings).

==== Shutter Button (50D) ====

//Submenu options://

**Block during REC**
blocks the shutter and related (AF, *) buttons while recording. In 50D,
taking pictures while recording would result in ERR99; with this
option, you can avoid taking pictures while recording by mistake. Side
effect: this will disable image stabilization during recording.

**Hold during REC (IS)**
ML will keep the shutter button pressed half-way during recording,
which will enable image stabilization (IS). Side effect: you need to
press the shutter button half way to turn IS off before the camera will
let you stop recording.

==== REC key ====

This option enables you to start/stop movie recording by half-pressing the shutter button.

//Submenu options://

**Require long press**

   * OFF
   * ON (1s)

**Allowed actions**

   * Start/Stop
   * Start only
   * Stop only

With this, you can use a wired remote to start/stop recording.


==== Gradual Exposure ====

//Submenu options://

**1EV / 8 frames**

**1EV / 16 frames**

**1EV / 32 frames**

**1EV / 64 frames**

**1EV / 128 frames**

**1EV / 256 frames**

**1EV / 512 frames**


==== FPS override ====

> INCOMPLETE

This setting alters FPS for all video modes.

//Submenu options://

**Desired FPS**
0.150 fps to 65 fps depending on your model capabilities. If the
desired value is not possible, ML will choose the closest safe option
(see 'Actual FPS' below).

**Optimize for**
Presets that will suit different situations:
  * Low light - use this option for recording timelapse with shutter speed set  to 1/fps (360 degrees); at high FPS values, you may be able to use other shutter speed values.
  * Exact FPS - try to achieve an exact FPS value, such as 24.000 or 30.000 or 12.500. If more exact solutions are  found, ML will choose the one with lowest jello effect.
  * High FPS - changes FPS without altering shutter speed and allows a slight overcranking (60D, 600D).
  * LowJello - 180d try to minimize the jello effect caused by rolling shutter,  while allowing you to expose at 180 degrees (0.5/fps) if possible.
  * High Jello: maximize the jello effect and enable fast shutter speeds. You  can use this mode for recording slit-scan frames (distorted images like  these, which use the extreme jello effect in creative ways).

**Shutter range**
displays the available shutter speed range with current settings. When
you use FPS override, Canon menu will still display 1/30 to 1/4000, but
the actual shutter speed will be found on ML displays. You can alter
shutter speed range by changing the ratio between the two timer values -
decreasing timer B will result in faster shutter speeds available.

**FPS Timer A**
FPS is changed by altering two timer values. Increasing either of these
values results in lower FPS, faster shutter speed and alters rolling
shutter. Only undercranking works well.  Timer A gets you in the
ballpark and ML will re-adjust timer B to match your FPS choice.

**FPS Timer B** ML will not re-adjust timer A, so this option will let you fine-tune the exact FPS value.

**Main Clock** displays the crystal oscillator frequency of the FPS circuit driver (read-only, depends on your camera).

**Actual FPS** this displays the current FPS, computed as TG_FREQ / timerA / timerB (read-only).

**Rolling Shutter**

**Constant expo**

**Sync w.Shutter**

**FPS ramping**

**Ramp duration**

This function will not change the frame rate from the video header; the
video will playback at the setting from Canon menu. Set FPS to a very
low value like 3fps to record a timelapse. This feature also works in
photo mode, making LiveView usable in dark environments. Combine it with
display gain. To get 180-degree shutter speed at very low FPS, simply
discard half of the frames in post. If 0.2 FPS is not enough, use Frame
Merger (a VirtualDub plugin). Exact frame rate may be rounded to be an
exact multiple of PAL/NTSC frame rates.
  * PAL modes: 25p/50p. Rounded frame rates: 33.333fps, 12.5fps, 11.111fps and so on.
  * NTSC modes: 30p/60p/24p. Rounded frame rates: 29.97fps, 23.976fps, 11.988fps and so on. For fine-tuning and calibrating custom frame rates, use  EOSTimerGen.

==== HDR video ====

[Incomplete] outdated info, dead links ...

This feature allows you to shoot a high dynamic range video by alternating ISO every other frame.
Your win: Dynamic range
Your loss: Resulting frame rate is reduced.


//Submenu options://

**ISO A**

**ISO B**

Select the two ISO values from the submenu. Possible postprocessing workflows:
  * Interframe script: user-friendly version and bare-bone version
  * GingerHDR (plugin for Adobe After Effects and Premiere)
  * Magic Lantern HDR Compose generator for FCP X
  * HDR Glogger Web Service
  * etc (please help me filling the list!)Discussion thread, postprocessing workflow, FAQ...

Don't get confused about HDR and Dual-ISO feature. This here is about HDR combining 2 frames with different ISO settings for movies. Dual-ISO is about using 2 ISO settings inside a frame/still photo by interlaced sensor lines.

==== Vignetting ====

In camera vignetting.

//Submenu options://

**Mid-range correction** Correction applied between the central areas and the corners.

**Corner correction** Stronger bias towards corners.

**Extreme corner correction** Heavy correction in the corners.

Minus values increase the vignette.


==== Image Finetuning ====

Settings for fine control of your image.

//Submenu options://

**ML Digital ISO** Pull back the ISO to achieve superior highlight roll off.

**Black Level** Set your black level to control green shadows.

**Absolute Zero Sharpness** Disables any kind of sharpening.

**Edge Emphasis** Picks out edges in bright areas.

**Noise Reduction** In camera noise reduction.

==== Creative Effects ====

Custom image effects found by investigating DIGIC registers.

//Submenu options://

**Desaturate** lets you record grayscale with any picture style.

**Negative image** Inverts your luma values

**Swap U-V** Red becomes blue.

**Cartoon look** for this to work, set sharpness in your picture style to any nonzero value.



==== Movie crop mode =====

600D 3x crop mode for supported cameras (100D, 650D, 700D, EOS M, EOS M2)

//Submenu options://






==== RAW video (MLV) ====
(http://www.magiclantern.fm/forum/index.php?topic=7122.0)

Magic Lantern (RAW) Video format v2.0.

//Submenu options://

**Resolution** 640 to 3584. Width of captured image in pixels. 5D2 tops out at 1856.

**Aspect Ratio** 5:1 to 1:2. Height of captured image.

**Create directory** ON or OFF. Saves video chunks in separate folders.

**Global Draw** ON or OFF. Disables GD while recording, though some previews require it.

**Frame Skipping** ON or OFF. Stops recording if you drop a frame.

**Preview Options** Auto, Canon, ML Grayscale, HaCKeD & Hacked No Prev.

**Status when recording** Icon, None & Debug.

**Start delay** 2, 4 & 10 second delay, useful for stabilizing.

**Files > 4GB (exFAT)** OFF, ON. By default ML will splitt long recordings into chunks up to 4 GByte each. File naming starts with *.MLV, followed by *.M00, M01 and - in theory - up to *.M99. Your record consists of *all* parts put together in postprocessing. So don't forget to transfer them to your working directory.
With setting ON only a unique file *.MLV will be created and growing in size while recording. If your file system is not exFAT ML will get stuck reaching 4 GB limit. ML itself does not check if file system is exFAT!
Caveat: Files > 4 GB are not supported on some file systems so make sure your storage device is compatible!

**Digital dolly** Pan your frame in camera digitally.

**Card warm-up** Some cards perform better after warming up.

**Extra Hacks** Small tweaks to maximise writing speed.

**Debug trace** Writes an execution trace to your card and causes performance dips.

**Show buffer graph** Shows current buffer usage and expected frames.

**Buffer fill method** Select your method for filling buffers.

**CF-only Buffers** 

**Card Spanning**

**Reserve card space** Reserves a chunk of space before recording to write over if you fill the card during a take.

**Tag: Text** Custom filenames.

**Tag: Take**


==== RAW video ====
(https://www.magiclantern.fm/forum/index.php?topic=16650.0)

Magic Lantern (RAW) Video format v1.1. (MLV Lite). Only visible after loading mlv_lite.mo in Modules tab.

//Submenu options://

**Resolution** 640 to 35xx. Width of captured image in pixels. 5D2 tops out at 1856.

**Aspect Ratio** 5:1 to 1:2. Defines height of captured image.

**Pre-record** OFF 1, 2 5 or 10 seconds: Stores given duration into internal memory buffer in a loop. Old frames are discarded. 

**Playback** Will play back the last record. Requires module mlv_play to be loaded.

**Advanced ...**

 * Preview: Auto, Real-time, Framing, Frozen LV 

 * Digital dolly: Pan your frame in camera digitally.

 * Card warm-up: Some cards perform better after warming up.

 * Use SRM job memory:

 * Small hacks: Small tweaks to maximise writing speed.

 * Show buffer graph: Shows detailed info and buffer allocation graphs.

==== Movie Tweaks ====

//Submenu options://

**Time indicator** When recording a movie, ML will display a small time counter in the upper right corner, which can be:
  * Elapsed: duration of the current clip
  * Remain.Card: estimated amount of recording time remaining on the card.
  * Remain.4GB: estimated amount of recording time until reaching 4GB (or until filling the card, whichever comes first).
Unlike Canon's timer which assumes constant bitrate, ML timer assumes variable
bitrate and works even if QScale is enabled. However, due to variations
in bitrate, the estimated value will fluctuate a lot, and this is
normal.

**Movie Logging** If this setting is ON,
Magic Lantern will write out a metadata file for the each movie to
MVI_1234.LOG (numbered after the movie). The log file contains lens and
exposure info, as well as a timestamp every time any of the parameters
is changed during recording. Log files are placed in the same folder as
the movies: DCIM/100CANON/, 101CANON etc. Tip: you can rename LOG files
to CSV and import them in MS Excel.

**Movie Restart**
While this setting is on, movie recording will restart automatically,
unless you stop it. There will be a few frames (typ. about 0.5 seconds) skipped during
restarting. 

H.264 (native Canon MOV recording):
Older Canon cams (Digic 4, no ExFAT support) do have 2 limits: 29:59 minutes recording time or recording reaching 4 GB. Whatever comes first will cause recording to stop.
Newer cams (Digic 5, ExFAT support) will stop at 29:59 minutes only.

MLV/RAW recording (Magic Lantern only):
No limit at all. Record as long as you like and battery, card space and temperature are good to go.
You may want to use this option to restart recordings stopped due to buffer overflow (card too slow to manage data bandwidth) but there will be corrupted frames. Buffer overruns will coming back after a short period.



If you want to do external recording or streaming (HDMI, USB) for 30+ minutes you do not have to use this setting anymore. Requires an experimental build (lua_fix or 4k).


**REC/STBY notify** Custom notifications for recording or standby:
  * Red Crossout highly recommended if you forget to press record
  * Message it shows STBY or REC
  * Beeps it will beep when recording starts or stops (only available for 500D, 550D, 5D2 and 60D).
  * Blue LED obvious if your camera has it
All options with display output require Global Draw/Overlays activated.

**Force LiveView** bypass the dialog saying Press LV button to activate movie shooting.
  * Always: force LiveView even if you use an unchipped lens, or no lens at all. Be careful, you may get dust on the sensor while changing lenses.
  * Start & CPU lenses: it will force LiveView at startup, regardless of the  lens used. After this, it will only bypass the dialog when a chipped  lens is attached (i.e. it will enter LiveView as soon as you attach a  chipped lens).
**Shutter Lock** This option locks the shutter value in movie mode (you will be able to change it only from ML menu).







> ==== Exposure Lock (50D) ====

> //Submenu options://

> Locks the exposure in movie mode. You can also use the * button (you don't have to hold it pressed).

> (Obsolete?)







===== Shoot =====

Functions for stills shooting, some of them work for movies too.


==== Advanced Bracket ====
> INCOMPLETE
Exposure bracketing for HDR images and timelapses. 
Aperture bracketing for landscapes, etc.

//Submenu options://

**Bracket type** Choose the variables to bracket.
  * Exposure (Tv, Ae)
  * Exposure (Flash)
  * DOF (Aperture)

**Frames** Number of bracketed shots. Can be computed automatically.
  * Automated
  * 0 - 12

**EV increment** Exposure difference between two frames.
  * Range 0.5 - 8 EV (0.5 - 2 EV in 0.5 EV increments, 2 - 8 in 1)

**Sequence** Bracketing sequence order / type. Zero is always first (cannot be changened in code, don't ask for it).
  * 0 - -- (descending exposure time
  * 0 - + -- ++
  * 0 + ++

**2- second delay** Delay before starting the exposure.
  * Auto
  * OFF

**ISO shifting** Also use ISO as bracket variable. Range 100 - max AutoISO.
  * OFF
  * Full
  * Half
  * 
[[http://www.magiclantern.fm/forum/index.php?topic=3045.0|Aperture bracketing]] In
M mode, this function does shutter and/or ISO bracketing. In the other
modes it does exposure compensation bracketing. To start bracketing,
take only the first picture and ML will continue the sequence. To
preview HDR images in camera, set SET+MainDial: ExposureFusion from
Prefs menu, Image review settings, then go to playback mode, hold SET
and turn the main dial (wheel). For each HDR picture set, Magic Lantern
may also write a bash script for stacking the exposures with enfuse
(version 4.x), with optional alignment (align_image_stack). More info:
 [[https://digital-photography-school.com/exposure-fusion-what-is-it-how-does-it-compare-to-hdr-how-do-i-do-it | Exposure Fusion: What is it? How does it Compare to HDR? How Do I Do
It?]]

Exposure time > 30 seconds: Not a problem at all. ML will extend exposure time on its own = entering ML's bulb mode. Screen will use setting stored in Bulb Timer -> Display during exposure (see below in section Bulb Timer).

Exposure time below cam's shortest shutter time: You will see an "E" appended to the lowest duration time. Means: Cam's limits are reached, this is an error. All photos set for lower durations will be taken with cam's fastest shutter timing.
==== Intervalometer ====
> INCOMPLETE
Take pictures at fixed intervals.
Additional features available after loading "Advanced Intervalometer (adv_int)" module.

//Submenu options://

**Take a pic every** Duration between two shots. More precise: Time between 2 "shutter button actuations". If duration is set to lowest setting (0s/like crazy) cam will take pics in burst mode.
Caveats:
If selected interval is lower than exposure time next pic will be taken immediately after last pic.
Option "Long exp. noise reduction" will result in exposure time doubled if condition is met.
If Intervalometer is used to trigger "Full Resolution Silent Pic" camera will take a few seconds for processing FRSP. 
Don't expect "like crazy" (burst mode) to run without hickups. Cam has to wait for free buffer to continue shooting. Same may be happen with low duration settings in combination with high date rates (RAW) and/or cards with low write rate.

> Internal note: ML menu shows (bottom line) calculation for time lapse duration depending on number of pics and interval. No idea how to represent this.

** Start trigger ** Options for how to trigger intervalometer.

   * Leave Menu: Will trigger Intervalometer by leaving ML menu or by camera startup/exiting powersave. Using this option is recommended if Intervalometer is running together with other ML/Canon features triggered by shutter button (FRSP, for example). 
   * Half Shutter: Trigger Intervalometer by half-pressing shutter release. May interfere with other ML/Canon features triggered by this action.
   * Take a pic: Trigger Intervalometer by full-pressing shutter release. May interfere with other ML/Canon features triggered by this action.


**Start after** Start delay (up to 8 hours).

**Stop after** Stop after X pictures.

You can stop the intervalometer by rotating the mode dial, by pressing MENU
or PLAY, or by turning off the camera. To avoid aperture flicker, shoot in
manual mode, use manual white balance, avoid short exposure times and
use a manual lens (if you use an EF lens, lock the aperture and unscrew
it). To make a timelapse without increasing shutter count, do not use
the intervalometer; instead, set FPS override to a very low value (for
example, 3fps) and start recording. Or use Silent Pic mode Full Resolution Silent Pic.
When using the intervalometer in LiveView with noisy mode, your shutter will wear twice as fast than
outside LiveView. If the intervalometer can't be stopped (it may happen
in crazy mode), turn the camera off or open the card door. Adjust your
auto-off setting to longer than your timelapse interval the camera will
turn off before the second shot. When not in LiveView, press DISP or
INFO to turn the display off. In LiveView, ML will turn the display and
the sensor off during idle times if you enable this option from
Powersave menu. While the intervalometer is running, the card led will
blink once per second to let you know it's alive and kicking.

**Ramping options**
Only visible after loading module adv_int.mo

Advanced ramping and exposure control for the intervalometer 
Forum:
http://www.magiclantern.fm/forum/index.php?topic=8431.0 

Create keyframes from current camera settings and specify the frame at which the keyframe is applied. You will select which parameters you would like to set in the keyframe and which you would like to ignore. The module ramps (linearly) the vaules of selected parameters from one keyframe to the next while the intervalometer is running.

Usage

You should create an initial keyframe at 1, that has the settings you are going to start with, that way the module knows what to ramp from. If you don't do this the module won't ramp to your first keyframe, it will simply set the values when it gets there (it doesn't know how to calculate the ramp, b/c it doesn't know what the values started as).

Exposure ramping

To ramp basic expo controls (Av, Tv, ISO) set them like normal in the canon GUI as if you were taking a picture, then go into the ML menu under 'Shoot' -> 'Intervalometer' -> 'Ramping Options' -> 'New Keyframe' and create a new keyframe. Turn on or off to specify which parameters are to be included in the keyframe. The current values are displayed on the right for you, but you cannot change them from here.

Focus ramping

For Focus you do specify the offset to focus to from the 'New Keyframe' menu. The module will calculate the number of focus steps it need to take each frame to arrive at your offset that you specify. It steps from wherever the lens is focused at the start. Negative values mean focus closer, positve is towards infinity. You need to be in LiveView for the focusing to work and make sure there is enough time after the exposure is taken, before the next one starts for the focusing to take place (I recommend at least 2s, maybe more depending on camera and lens)

Misc notes

You can ramp the intervalometer period as well, this you also specify from within the new keyframe menu
Once you have created keyframes you can view them with the 'List Keyframes' menu. You can also save your keyframe sequence to file, and then reload them later. If not saved, any keyframes you created will be lost when the camera is turned off. Keyframes are saved and loaded from a file called "SEQ.TXT" in the ML/SETTINGS directory.
When you have created keyframes and are ready to begin, make sure the advanced intervalometer is turned on, then turn the intervalometer on as usual from the ML Shoot menu.

AutoETTR compatibility

This module is compatible with AutoETTR so long as you don't try to ramp the parameters that AutoETTR is trying to change. You can ramp Av and let AutoETTR take care of Tv and ISO, or you can ramp Av and Tv and let AuttoETTR only set ISO, or put AutoETTR to link to Canon shutter (then your Tv will basically be setting the slowest Tv parameter of AutoETTR)


//Submenu options://

  * Enabled OFF, ON
  * Use Global Time OFF, ON
  * Loop After OFF, 1 - 5000
  * External Source OFF, ON
  * List Keyframes 
  * Save Keyframes
  * Clear Keyfames
  * New Keyframe...


==== Post Deflicker ====

Menu item only visible after loading module "Post Deflicker (deflick.mo)

De-flickering stills, time-lapses and movies to achieve matching brightness. May be used to get [[https://www.magiclantern.fm/forum/index.php?topic=5705.0|flicker free time-lapse]]. 

> INCOMPLETE
(http://www.magiclantern.fm/forum/index.php?topic=10496.0)

//Submenu options://

**Sidecar file type** Sidecar file format for deflicker metadata.
   * UFRaw: Suitable for open-source UFRaw image processor. Because of cam's limitation files are named "*.UFR". Rename to "*.ufraw" before running them into UFRaw.
   * Adobe XMP: Suitable for Adobe products.

**Deflicker percentile** Where to meter for deflickering. Recommended 50%.

**Deflicker target level** Desired exposure level for processed pics. 0 = overexposed.

File naming for sidecar files expects setting "Color Space = sRGB" and does not support "Adobe RGB" setting on its own.
If used for silent pics: Supports DNG files only!



==== Bulb Timer ====

Very long exposures with Bulb mode and ML timer. This feature is useful for night shots and astrophotography.

//Submenu options://

**Exposure duration** from 1s to 8h00m00s in 1 seconds increments.

**Display during exposure**

   * Don't change: You will see a clock counting up
   * Turn off: Just black
   * Show previous pic: Shows last image taken and clock counting up + Remaining seconds

Bulb timer is started by holding the shutter pressed halfway for one second,
or by remote triggers / intervalometer. You can cancel the exposure
earlier by half-pressing the shutter button.
If used together with other features (Silent pics, Intervalometer, ...) make sure half-shutter actuation will not get mixed up.


==== LCDsensor Remote ====

Start/stop remote shutter release mode with the LCD sensor.

//Submenu options://

**Near:** To take a picture, put your hand near the LCD sensor.

**Away:** Picture is taken when you get your hand away from the sensor. You may combine this setting with Mirror Lockup.

**Wave:** Picture is taken after you wave your hand 3 times near the
sensor. You can leave it on without interfering (too much) with normal
shooting.

This feature is useful for avoiding camera shake. In
Movie mode, the Wave ? setting is able to start and stop recording
movies. The other modes can only start recording (because it's too easy
to stop recording by mistake). While recording, the Near and Away modes
can trigger the rack focus operation.


==== Audio RemoteShot ====

Start/stop remote audio trigger 
Activated by internal or external microphone.\\

**EOS M users**: As a by-product it offers wired remote trigger for cameras without standard trigger plug. You can connect any wired remote trigger to microphone input and active this feature. Of course you cannot use internal microphones at the same time.

//Submenu options://

**Trigger level (dB)**

To take a picture (or start recording a movie), make some loud noise, for
example, clap your hands or pop a balloon. With the audio trigger you
can sync a video recorded without sound with an external audio track.
This may trigger the shutter from the sounds made by camera (like focus
beep or noise from operating the buttons).

This setting is not persistent! If cam is turned off or going into powersave Audio Remote Shot will be disabled.
If you want to use this feature for surveillance you may want to use LUA script to enable Audio Remote Shot after brownouts.


==== Motion Detect ====
> INCOMPLETE

//Submenu options://

**Trigger by**
    * Exposure change: it only reacts to brightness changes. Detects large
moving subjects which cause significant change in exposure.
    * Frame diff.: it computes the difference between last two frames A and B
(luma channel only); this detects smaller movements which do not change
exposure.
    * Steady hands: For handheld shooting. Triggers if there is no blur detected.

**Trigger level** High values = less sensitivity to motion.

**Detect Size** Size of the area on which motion shall be detected.

**Delay** Range from 0 (OFF) to 1 second in 0.1 second increments. Delay between the motion detection and picture taken.

Detection time is somewhere between 200-300ms (according to DataGhost's speed test), or faster with silent pictures. If "Use Autofocus" is selected it may add another (non-deterministic) delay due to the focusing.

This setting is not persistent! If camera is turned off or going into powersave Motion Detection will be OFF!
If you want to use this feature for surveillance you may want to use LUA script to enable Motion Detection after brownouts.


==== Silent Pictures ====

>INCOMPLETE

Take pictures in LiveView mode without moving mirror or shutter. Only visible after loading silent.mo in Modules screen tab. 

All options (excluding "Full-res" which does use full sensor area and resolution) work similiar in respect to resolution/aspect ratio. Resolution/aspect ratio depends on LiveView and is therefore restricted. And actual resolution/aspect ratio depends on camera model, being in still or movie LiveView, zoomed in or not.
You might want to use movie mode for highest vertical resolution. And yes: "Silent pictures" is working in Movie mode, too.

//Submenu options://

**Silent Mode**
    * Simple: simple, low-resolution. Image resolution is usually
around 1 or 2 MPix, and depends on the current mode (zoom or not,
recording or not, and movie resolution). For almost-FullHD resolution
(1720×974), choose FullHD to record a dummy movie.
    * Burst: Same as "Simple" but in burst mode. Started by pressing Half-Shutter (> 0.5 seconds) - and keeping it pressed - it fills up internal memory buffer with individual images. If button is released or buffer is filled (whatever comes first) buffer content is written to card . Number of images depends on resolution and cam's buffer size.
    * Burst, End Trigger: Same as "Burst" but overwrites oldest buffered images if buffer limit is reached without stopping taking new pics. If button is released image aquisition will stop and buffer will be written to card. This option allows you to record a sequence that's determined by an unpredictable event: a bird approacing a nest, lightning bolt, etc...
    * Best Focus: Pretty much like burst but with postprocessing in regards of focus precision. As long as you keep Shutter button half-pressed images go into buffer continuously (overwriting oldest images, if any). After shutter button is released cam will calculate focus for each picture and store them in order. Lowest file number goes to the pic with best focus, highest number to the worst.
    * Slit-Scan: For creative use and fun. Enjoy "rolling shutter" galore! If enabled you may choose
    * Slit-Scan Mode:  Top->Bottom, Bottom->Top, Left->Right, Right->Left, Horizontal

    * Full-res: Silent pic covering full sensor area. In ML forums this feature is known as FRSP (Full Resolution Silent Pics). [[https://www.magiclantern.fm/forum/index.php?topic=12523.msg120497#msg120497|Forum thread covering FRSP]]


Limits: 
FRSP is not made for short exposures. You will get overexposured pictures if you insist on using short shutter settings.
If you use minumum exposure time (1/4000 or 1/8000) you will get a gradient. (Example: 5D3 gets 1/33.19 at the frame's top and 1/6.30 at the bottom).
500D, 550D and 600D are limited to exposure times up to 0.8 seconds. Other cams can do 15 seconds.
Tips:
You have to enable Expo Override to change aperture. Or use manual lenses.
ETTR works best with Intervalometer. Set ETTR option "Always On". Adjust aperture or use ND filter to get exposure times above 0.5 seconds. Otherwise results may be impossible to deflicker in postprocessing. Don't forget Silent pic and Intervalometer are using the same default trigger. Change Intervalometer trigger to "Leave menu" to avoid this.
Source: https://www.magiclantern.fm/forum/index.php?topic=12523.msg143510#msg143510

**Trigger mode**

   * Half-shutter press
   * Half-shutter release
   * Delayed    Start image capture 2 seconds after half-shutter release

**File Format** Choose DNG or MLV. Later requires loading MLV_REC.mo.
In short: "DNG" writes a single pic to a single files. MLV writes all single pics of a session into a single MLV. Similiar to a movie file consisting of several consecutive frames. A new session (incrementing file name) begins after powersave or after shutdown/restart. 
If you want to use Deflicker option (deflick.mo) you have to use DNG format. MLV not supported.

Storing into MLV is considerable faster than writing DNG. Example: 7D, burst mode (94 pics). 
Writing DNG: 80 seconds
Writing to MLV: 24 seconds

Silent picture setting is applied to intervalometer and remote triggers. 
> Description neeeds work: It will also go to LiveView when you press the shutter half-way. 
Therefore, you should only enable this setting when you actually use it. 

File names (DNG):
File naming for silent pics is derived from the last "normal" picture taken. Canon names RAW files IMG_xxxx.CR2 (colour space setting sRGB) or _MG_xxxx.CR2 (colour space setting aRGB). Silent DNG pics will be named xxxxyyyy.dng beginning with yyyy=0000. Number will be incremented with each silent pic written to card. 
Keep in mind option "Best Focus" does write files not in chronological order but in order of focus precision.

If Silent Pics are triggered by Intervalometer name schema changes to Intervalometer settings: Counting beginns with 00000000.DNG on an empty card (=no previous intervalometer session stored) or continues counting from the last intervalometer shot.

File names (MLV):
File naming for silent pics is derived from the last "normal" picture taken. Canon names RAW files IMG_xxxx.CR2 (colour space setting sRGB) or _MG_xxxx.CR2 (colour space setting aRGB). Silent pics (MLV) of a session will be stored in xxxxyyyy.MLV beginning with yyyy=0000 for the first session. 
In "Simple" mode a new session begins after Powersave or Shutdown/restart.
In "Burst" modes each burst will generate a new session file with file number incrementing.





==== Mirror Lockup ====

Mirror lockup. See Canon user guide for details.

//Submenu options://

**MLU mode** Choose when MLU should be active.

**Handheld Shutter** At what shutter speeds you want to use handheld MLU.

**Handheld Delay** Delay between mirror and shutter movement.

**Normal MLU Delay** MLU delay used with intervalometer, bracketing, etc.

Timer+Remote will auto-enable MLU under one of the following conditions (and disable it otherwise):

self-timer mode is on (either 2 second or 10 second, but not continuous)

LCDsensor Remote is in Away mode.


==== Flash tweaks ====

A few tweaks for flash users:

//Submenu options://

   * Flash expo compensation (-10..+3 EV). Tip: you may use -10EV to trigger an
external flash without putting light on the scene coming from the
onboard flash.

   * Flash / No flash: use this when you are not sure
whether to use flash or not. Odd pictures (by file number) will be taken
with flash, even pictures without flash.


> Available for 1100D, 500D, 550D and 600D only. None of them here to test. Anyone out here to be able to drop a word?

   * 3rd party flash in LV: a trick for using a non-Canon flash in LiveView on Rebel cameras, which
disables LiveView on half-shutter press. DISABLE this option when you don't use it!!!

==== Shoot Preferences ====
> INCOMPLETE
//Submenu options://

**Pics at once** Range: 1 (OFF) - 9. How many pics to take at once for each trigger event. 

Useful for one-time events like Audio Remote Shot, Trap Focus, Motion Detect.
If using together with Intervalometer make sure exposure time (multiplied) does not exceed interval duration.

**Use Autofocus** For intervalometer, audio remote shot and motion detect.

With default setting OFF intervalometer, audio remote shot and motion detect will *not* use autofocus no matter AF on lens is selected. If trigger condition is met an image will be taken!
With setting ON autofocus will be used. If the cam is unable to establish focus confirmation there will be no image aquisition. 
Also consider that lag between trigger condition met and image aquisition will be extended by the time needed for focusing.

**Post scripts** Post processing scripts/listings for bracketing and focus stacking.

  * Enfuse
  * Align+Enfuse
  * File List

This option will generate a flat text file for each bracketing or focus stacking sequence. Those are made for Unix-like systems (OS X, macOS, Linux,...) able to run .sh scripts or (in case of "File list") are just lists of image file names for given sequences.
Caveat: Image file names are generated with .JPG extension regardless which image files format is actually recorded. If you want to run those scripts with RAW/DNG/MLV you may want adjust this by another script. ;-)


**Intervalometer Script** Scripts/list for sorting intervalometer sequences.

Those scripts consists of commands creating directories for each interval sequence and moving associated image files to those directories.

  * Bash: .sh script for running on Unix-like systems (OS X, macOS, Linux, ...)

  * MS-DOS: Batch file for the Windows CLI (command line interface) aka DOS-box.

  * File List: Plain text file 

Directories names are computed according to first file name of a sequence. Example: First file is named IMG_1234.CR2 -> Directory name will be IMG_1234 (without extension) and it will contain all files for that sequence.



**Snap Simulation** Simulates picture aquisition for testing purposes without wearing out shutter and mirror. Useful for testing Íntervalometer, Advanced Bracketing and Focus Stacking features.








===== Focus =====

Different controls for focus.


==== Trap Focus ====

Takes a picture when the subject comes into focus.

//Submenu options://

**OFF**

**Hold AF button** you need to hold the autofocus button (half-shutter, * or AF-ON, depending on your settings).

**Continuous**
you don't need to hold any button; ML will hold the half-shutter
pressed for you. This will also block most buttons; press the shutter
halfway to unlock them for two seconds.

Outside LiveView, it only
works with lenses with chip. In LiveView it only works for photos, and
it will take a picture when the focus indicator has (almost) maximum
value on the focus graph. You may have to turn the lens back and forth a
few times in order to let ML compute the correct focus scaling factor
for the current scene. If you move from a high-contrast scene to a
low-contrast one, you will also have to wait a bit until the
high-contrast data disappears from the focus graph. Press SET to
temporarily disable automatic scaling of focus magnitude.


==== Follow Focus ====

Very simple follow focus (like a rack focus controlled manually).

//Submenu options://

**Focus using OFF**

**Focus using Arrows**
you will be able to focus with the arrow keys. 

**Focus using LCD Sensor**
Focus by placing your hand near the LCD sensor (avoiding
shake). To use this, you may need to disable LCDsensor Remote.

Quick rack focus **while recording**:

  * Press ''MENU'' to save current focus point (this means ''I want to return here'');
  * Use follow focus to change focus point (focus somewhere else);
  * Press ''PLAY'' to go to saved focus point;
  * Press ''PLAY'' again to go back.

When "Arrows" is selected you have the option to use slow (FF-, FF+) or fast (FF--, FF++) focusing.

When "LCD Sensor" is activated you only have slow focusing (FF-, FF+). You have to toggle direction by LCD sensor itself! A short wave in front of the sensor will trigger focusing one step into the "false" direction and toggle FFx.


==== Focus End Point ====

This is end point of rack focus and focus stack (X focus steps from the start point, i.e. from current focus point).


//Submenu options://

Works in Liveview only!

How to use:

{{ :focus_end_point.png?200|}}
Focus the lens in Liveview<sup>1</sup>, enter ML menu by pressing trashcan button, browse to this menu item and press Q.\\ 
After pressing Q, ML will display "Focus End Point: 0 steps from here.." This means the end point is now assigned to current focus
position. At this point, you will see the LiveView image (if not: Press Q again until LiveView is active. See screenshot)
and set start point using left and right keys (just like with follow focus) or
the main dial (scrollwheel). The start point will be always the current
focus point (which you are changing); the end point will remain fixed.
There may be a bit of lagging between focusing and screen info getting updated with actual focus step numbers.

<sup>1</sup> You can use 5x/10x magnify to get better focus control

If want to get rid of ML menu items in LiveView you may press trashcan button.


==== Rack Focus ====

Triggers the rack focus operation that moves between the start and end focus points.
You have to set both points in "Focus end point" menu!

//Submenu options://

After the move is complete pressing again reverses the move.

SET: rack focus will start after 2 seconds;

> Not reproducable with 650D,7. Not working  Q: rack focus will start immediately;

> Record start not working in 650D, 7D
> Play button not working in 100D at all PLAY: ML will automatically record a short clip with the rack focus operation.

Rack Focus (and Focus Stacking) are using AF motor step settings defined in menu item "Focus Settings"!

==== Focus Stacking ====

This selection will shoot a series of photographs with varying focus points.
It is frequently used in macro photography to enlarge depth-of-field (DOF) by merging photos where each has a different focus point. Also used - to a lesser extent - in landscape photography.\\
Another term for this technique is DFF (Deep Focus Fusion).


//Submenu options://

**Run focus stack**

**Num. pics in front** "In front". Direction: From "reference point" (current focus point) towards your camera.

**Num. pics behind** "behind". Direction: From "reference point" (current focus point) away from your camera.

**Focus steps / picture** "Number * Step Size = actual steps between two pics". In short: Adjust Step Size according to lens used and adjust "Focus steps/picture" according to magnification factor, aperture and desired details in stacked image.

**Flash Delay** If flash is used this setting will determine seconds reserved for recharging. Your cam is unable to know if the flash is properly charged or not.

**Copy rack focus range** Takes focus points selected with "Rack focus" for Focus stacking. See "Usage", esp. "Method 1".

Usage:

Before you begin you may consider running cam in Snap Simulation (Shoot screen -> Shoot Preferences). This will prevent wearing out mirror and shutter while struggling to make sense of focus stacking settings, esp. finding proper front and back focus planes and proper focus step values.

Sequences running into focus delimiter (reaching cam's focus distance limit) will get terminated with an error message "Focus: soft limit reached" and - worst case - leaving you with a bunch of files not suitable for postprocessing.


Method 1:

Configure rack focus and use it to preview the focus range.\\
Then select menu item "Copy rack focus range".
Select the number of focus steps to skip. This will determine the number of pictures to be taken.\\
Press PLAY to start the focus sequence (PLAY mode) or take the first picture with shutter release.\\

Method 2:

Focus your lens. This will be the reference point for this session. You may now select "Num. pics in front" and/or "Num. pics behind". After taking pics lens will return to reference point. 



Script generation: After enabling one of the options found in "Shoot" -> Shoot preferences -> Post scripts each session will generate a file called FST_xxxx.sh. See description for this menu item. 

Focus stacking can be combined with other ML features. Enabling FRSP (Full Resolution Silent Picture) with Focus stacking will reduce wear and tear to shutter and mirror rigorously!

Focus Stacking (and Rack Focus) are using AF motor step settings defined in menu item "Focus Settings"!



==== Focus Settings ====

> INCOMPLETE

//Submenu options://    
    * Step Size: Step size for one focus command, as used by EOS Utility.
    
    * Step Delay: Delay between two successive focus commands. May be used with option "Step Wait".
    
    * Step Wait:

If Wait is not active, ML will only wait a for fixed delay before sending 
next focus command. This will reduce stutter, but may affect rack focus
accuracy. This setting is recommended if you only use follow focus.

If Wait is active, ML will wait until each focus command is completed, and
then it will wait for a fixed delay, as configured here. This will
increase rack focus accuracy, but may cause stutter with certain lenses.
    * Left/Right dir
    * Up/Down dir
    * Start delay




==== DOF Settings ====

Configures Depth of Field info display at the bottom of this screen.

//Submenu options://

**Circle of Confusion** 

**DOF formula**
    * Simple
    * Diffraction-aware
**DOF info in LiveView**: OFF or ON

==== Focus Patterns ====

Custom focus patterns which can be used either with autofocus or trap focus. Menu item will be seen in cameras with "classic" 9-point rhombus.

{{ :focuspat.png?nolink |}}

//Submenu options://

**Center selection**

**Horiziontal selection**

**Vertical selection**

**Shortcut keys**

To change the focus pattern:

Set your camera in photo mode, non-LiveView. Look through the viewfinder
and make sure the main display is off. Change the focus pattern with the
arrow keys and SET. You may or may not receive visual feedback. Press
the Zoom In button twice to see the current selection. You can use the
custom focus patterns in LiveView Quick Focus mode, too, but the pattern
won't be displayed on the screen. This feature was ported from 400plus.


==== DOF info ====

Read-only lens and Depth of Field data.

//Submenu options://

** Lens:** Lens identifier, focal length, aperture


** Focus Dist **

The distance to the focal point. Value is returned by most newer Canon lenses.

If the lens does not report any distance information, 0 will be displayed
and the DOF calculations will not be correct. See also Focus distance.


** Hyperfocal **

The hyperfocal distance is the point of focus where everything from half
that distance to infinity falls within the depth of field. This is the
largest depth of field possible for the current f-number.

** DOF Near **

The nearest distance in which objects appear in focus.


** DOF Far **

The farthest distance in which objects appear in focus.

**Diffraction blur**

Size of airy disk (is it?)

==== DotTune AFMA ====

Auto calibrate AF microadjustment \\
Only available for featured cameras and after loading dot_tune.mo in Modules tab.

//Submenu options://

** Start Scan **

** Scan Type **
Auto range detention\\ 
Linear -20 .. +20 \\ 
Linear -40 .. +40 \\
Linear -100 .. +100 \\

** Scan Passes **
1 .. 10

** AF microadjust **
-100 .. +100\\

** AFMA mode **
Disabled, All lenses, This lens






=====  Display =====

Options for display - most of them are for LiveView.


==== LV Digic peaking ====

LiveView focus peaking __without__ affecting write performance

Will only displayed if half-shutter button is not pressed!

//Submenu options://

**OFF**

**Slightly sharper** Areas in focus will be slightly sharpened

**Edge image** Grey image with edges displayed in white

**Edge + chroma** Same as Edge image but in chroma.

==== LV brightness ====


//Submenu options://


==== LV contrast ====

Adjusts the contrast in LiveView. It doesn't affect recording. This helps when focusing with very flat picture styles.

//Submenu options://

**Zero**

**Very low**

**Low**

**Normal**

**High**

**Very high**

**Auto**


==== LV saturation ====

Adjusts the saturation in LiveView. It doesn't affect recording. This helps you focus without being distracted by color.

//Submenu options://

**Grayscale (zero)**

**Low**

**Normal (no effect)**

**High**

**Very high**

**Boost on WB adjust**


==== LV display gain ====

Photo/stills mode only.
This feature increases the brightness in LiveView, making it usable in very
dark scenes (where Canon's LiveView would be pitch black).

//Submenu options://

**OFF**

**1-6 EV**

Combine this with FPS override for better low-light performance in photo mode.
For movie mode, use ML digital ISOs for a similar effect.



==== Clear Overlays ====

Clear bitmap overlays from LiveView display. It will affect all overlays alike no matter if they are enabled in [[#Overlays|ML Overlay tab]] or via Canon menu.

//Submenu options://

**OFF**

**HalfShutter**
Hold the shutter half-pressed, or the * button, or DOF preview for
around 1 second to clear all the overlays from the Live View display
(audio, zebra, crops, shutter speeds…).Tip: assign autofocus to * button
(from Custom Functions, set Shutter/AE lock button = AE lock/AF).

**WhenIdle**
In this mode, all the overlays are erased from the screen (100% clean
display) when the camera is idle (i.e. you don't press any buttons).

**Always**
In this mode, all the overlays are erased from the screen; you will
have to change shooting settings blindly. You can still use the
menus.Tip: this feature may be useful with External Recorders, since it
removes the focus box and other graphics from the display.

**Recording**


Be aware there are other options affecting overlay visibility: Overlay screen -> Global Draw -> Options: Off, LiveView only, Quickreview only, Both LV and QR. And MLV_REC has a switch to turn off Global Draw, too.

==== Defishing ====

Preview the rectified (defished) image from Samyang 8mm fisheye lens, using rectilinear projection.


//Submenu options://

**OFF**

**Rectilinear**

**Panini**

This feature works best in photo mode (outside LiveView). Defishing uses a pre-computed look-up table (LUT). It is possible to create LUT files for any other lens or projection by defishing vram/xy.png with your favorite defishing software, and then running vram/defish-lut.m to get the LUT file. All the required files are found in the ML source tree. Project files (*.PTO) for nona (hugin) are provided for both rectilinear and Panini projections.

==== Anamorphic ====

Adjust display for anamorphic lenses.

//Submenu options://

**OFF**

**5:4**

**4:3**

**7:5**

**3:2**

**5:3**

**2:1**


==== Advanced settings ====

//Submenu options://

**Kill Canon GUI (50D)**

For 50D only: disable Canon graphics elements to avoid conflicts with ML graphics in LiveView.

//Submenu options://

   * OFF

   * Idle/Menus: only enable Canon graphics when some transparent menu from LiveView is active.

   * Idle/Menus+Keys: only enable Canon graphics when you press some keys or navigate the transparent menus from  LiveView.


**Screen Layout** Choose screen layout (position of ML top and bottom bars), for different cameras or for external monitors.
Top/bottom layouts:

  * 3:2 display, t/b: default layout for 3:2-screen cameras (550D and newer).
  
  * 16:10 HDMI, t/b: for 16:10 HDMI monitors.



  * 16:9 HDMI, t/b: for 16:9 HDMI monitors.

  * 4:3 movie (for 5D Mark II, 500D and 50D in movie mode).
Bottom-only layouts:

  * Bottom, under 3:2: useful for 4:3-screen cameras (500D, 50D, 5D Mark 2) in photo mode.

  * Bottom, under 16:9: suitable for low-resolution external monitors and for 4:3-screen cameras in movie mode.

**Color scheme**
This affects the colors and brightness of the on-screen information including LiveView overlays, Canon menus and ML menus.

//Submenu options://

Range from: Default (bright), Dark, Bright Gray, Dark Gray, Dark Red, Dark Green. Tip:
dark themes may reduce the eye strain during night shooting.



**Image position**
This may make the image better visible from different angles
(especially on cameras without flip-out screen). 

//Submenu options://

Range from -16px to 16px in 8px increments.

**UpsideDown mode** This mode is useful if you want to mount your camera upside-down.

**Orientation**

Upside-down and mirroring option

For cams with flip-out LCD

//Submenu options://

   * Normal

   * Reverse: Another Upside-Down option

   * Mirror: Flip horizontally (mirrored along vertical axis)


**Auto Mirroring** 
For cameras with flip-out LCD, this options prevents mirroring the display
when you open it at 180 degrees. 

**LV crazy colors**

May be helpful for white balance.

//Submenu options://

   * OFF

   * Swap U-V

   * Extreme Chrome

**Force HDMI-VGA**
This option will force a low-resolution mode on HDMI displays
(720×480), which avoids black screen when you start/stop recording.





===== Prefs =====
> INCOMPLETE

==== Card settings =====

This menu is unique to 5D3.

//Submenu options://

**Card test at startup**

**CF card workaround**

**Preferred card**


==== Config files ====

Magic Lantern saves its settings in a configuration file named MAGIC.CFG,
located under ML/SETTINGS directory on your card. This submenu lets you
customize how these settings are saved.

//Submenu options://

> lua_fix entry
> **SET at startup** By enabling this ML will not be loaded at startup. Same as pressing SET during startup.

**Config preset** Create different presets of menu configurations.

ML options and settings can be overwhelming, esp. when trying to switch between different setups.
Using Config Presets allows to switch numerous ML settings at once. Therefore presets come handy.

    * OFF
    * Startup mode: Load a preset associated to selected mode (by Mode Dial)
    * Startup key: Load a preset by pressing MENU/PLAY/INFO at startup. INFO button might be tricky because it will work only if pressed shortly after power on. The other keys work fine if being pressed before powering up cam. 
    * Custom presets: You are able to configure up to 13 custom presets. They will only be visible after creating subdirectories in ML/Settings (using your PC). The name displayed in this menu matches the name given to the subdirectory. Name length for directories is limited to 8 characters.
Tipp: Use smart naming conventions such as preceeding P or V letters to distinguish between photo and video presets. 
Caveat: Order of custom presets is not by alphabet/number but date of directory creation (time stamp)! Newest cames last, oldest first.

**Config AutoSave**
Saves settings automatically to magic.cfg whenever you change a setting
in ML menu. Config saving process will take place as soon as you close
the menu.

**Save config now** Save ML settings to ML/SETTINGS/MAGIC.CFG or the config preset selected.

**Restore ML defaults** use this to restore ML default settings. After deleting the config file, restart the camera.

As mentioned above using Config Presets allows to switch numerous ML settings at once. If you want to rely on this feature make up your mind about how to change and preserve settings. 
The issue at hand is: There is no "Back to last setting". ML has 2 options (indiviual for each config preset): 
    * Always save all and every changes as soon as changes are done and the menu item is closed: Config AutoSave ON
    * Do not save any change to config file MAGIC.CFG: Config AutoSave OFF
Imagine you are in the field and one of your precious config preset settings has to be changened because of unique circumstances. With Config AutoSave ON your precious preset will be overwritten and you have to remind yourself to reset this very setting if you want to go back to status before. 
With Config AutoSave OFF the changed setting will not be persistent and gone after shutdown. So you have to remind yourself to re-set this very setting or you are shooting with just the setting from the very beginning.

There is no right or wrong in using either option. It's just up to you to find a suitable workflow to avoid problems.
Don't forget: If you are using Config Autosave OFF you are still able to overwrite your settings by using "Save config now"!

Recommended for custom presets: Backup your ML\Settings directory to a safe location. You will be able to restore settings anytime by just overwriting the troubled preset directory or all of them.

==== Image review settings ====

Customize the image review (playback) mode.

//Submenu options://

**Play mode actions** When you press associated "Trigger key(s)" (see below), ML may perform one of these functions:

//Submenu options://

  * **Action type**:


       * OFF
       * Exposure Fusion: combine two or more images, useful for previewing HDR images or multiple exposures.
       * Compare Images: compare two images with a diagonal split view. The current image will always end up in the top half.
       * Timelapse Play: scroll through all your pictures quickly.
       * Exposure Adjust: ?

     * **Trigger key(s)**


   * Set+MainDial
   * Left/Right
   * L/R & Set+Dial


**Image Review**
  * QuickReview default: just like in standard firmware.
  * Canon Mnu:Hold->PLAY: if you set Image Review: Hold in Canon menu, it will go to PLAY mode  instead. This allows you to zoom in as soon as you take the picture  (without having to press PLAY). Credits goto Ken Rockwell for suggesting this.

**Quick Zoom** Faster zoom in PLAY mode, for checking critical focus:
  * OFF
  * ON - zooms faster than Canon firmware.
  * SinglePress ? 100%: a single press of Zoom In will zoom all the way in (to 100%) -  on center point. Next press will zoom out (full screen image).
  * Full zoom on AF pt.: similar, but it will zoom on currently selected autofocus point.
  * Full Z on last pos.: similar, but it will remember the last position of the zoom box.

**LV button** Customize the LiveView button in PLAY mode:
  * Default (enter LiveView)
  * Protect image
  * Rate image

**Quick Erase** Shortcut for erasing images without confirmation (hold SET and press ERASE). Be careful!


==== LiveView zoom tweaks ====

Customise zoom features.

//Submenu options://

**Zoom x5** Disable Zoom function.

**Zoom x10** Disable Zoom function.

**Auto exposure on Zoom** Auto adjusts exposure so you can focus manually wide open.

**Increase SharpContrast** Increase sharpness and contrast when you zoom in LiveView.

**Zoom on HalfShutter** Enable zoom when you hold he shutter halfway pressed.

**Zoom with Focus Ring** Zoom when you turn the focus ring on some Canon lenses.


==== Focus box settings ====

Determine the behaviour of the focus box.

//Submenu options://

**Speed** Allows you to move the focus box quicker.

**Snap points** Pick points of your image to snap the box to.

**Display** Show or Auto-Hide.


==== Arrow/SET shortcuts ====

Select the features you want to adjust quickly with arrow and SET keys.

//Submenu options://

**Audio Gain**
  * LEFT/RIGHT: input gain
  * UP/DOWN: output gain
  * SET: input
**ISO/Kelvin**
  * LEFT/RIGHT: ISO
  * UP/DOWN: white balance
  * SET: PushWB
**Shutter/Aperture**
  * LEFT/RIGHT: shutter
  * UP/DOWN: aperture
  * SET: 180d shutter
**LCD Bright/Saturation**
  * LEFT/RIGHT: LCD bright
  * UP/DOWN: LCD saturation
  * SET: reset

**Use SET button** Enable functions for SET when you use arrow keys:
  * Audio input (internal mic, external mic, balanced…)
  * Push-button white balance
  * 180-degree shutter speed
  * Reset LCD brightness to 5 and saturation to Normal.
==== Misc key settings ====

//Submenu options://

**LCD Sensor Shortcuts**
Use the LCD face sensor as an extra key in ML (e.g. for triggering arrow
keys, for blocking follow focus or for bypassing magic zoom key).
To fully disable the LCD sensor in Magic Lantern, disable LCD auto off
from Canon menu (Wrench 1). You need to do this if you are using a
device which covers the LCD sensor (e.g. a loupe).

**Sticky DOF Preview**
Makes the DOF preview button sticky (press to toggle). Enabling DOF
preview will block certain buttons. Enable Exposure Override to preview
DOF without blocking the buttons.

**Sticky HalfShutter**
Makes the half-shutter button sticky (press to toggle). Use this to
prevent the camera from turning off LiveView after 30 minutes.



**Swap MENU ERASE** (60D)
Swaps MENU and ERASE buttons. This feature allows one-handed navigation in ML
menu on 60D, but will have to use MENU button to delete the pictures.

**DigitalZoom Shortcut** (600D)
On 600D/T3i, this lets you customize the behavior of DISP + Zoom In / Zoom Out shortcut key in movie mode:
1x,3x : toggle between 1x and 3x digital zoom modes (FullHD)
3x 10x: default Canon setting (change digital zoom value between 3x and 10x).
Note: by default, Magic Lantern disables digital zoom values greater than 3x in order to avoid image quality degradation.


==== Warning for bad settings ====

//Submenu options://

**Mode warning** Warn if you turn the dial to another position.

**Quality warning** Warn if you change the picture quality.

**ALO warning** Warn if you enable ALO by mistake.

**WB warning** Warn if you disable AWB by mistake.

**AF/MF warning** Warn on manual/automatic focus.

**Warning message** Use LED and/or messagebox and/or beep to warn you.


==== Powersave in LiveView ====

Options for maximizing battery life when using LiveView.

//Submenu options://

**Enable power saving** on Standby, during Recording, or always.

**Use LCD sensor** You can use it to wake up from powersave (wave your hand
near it), or to force powersave mode (cover the sensor for a few
seconds).

**Use shortcut key** Shortcut key for enabling powersave modes right away.

**Dim display** In LiveView, if the camera is idle, Magic Lantern will reduce the LCD backlight level to minimum in order to save power.

**Turn off LCD**
This will turn off the display and the sensor activity in LiveView.
Mirror will not be moved. If the camera is recording or motion detection
is enabled, only the display will be
turned off (so recording will not stop).

**Turn off GlobalDraw** If the camera is idle, ML overlay graphics will be disabled to reduce CPU usage.



==== GPS Power Save (6D) ====

Force GPS into powersave mode.

//Submenu options://


==== LV Display Presets ====

This feature lets you create 1, 2 or 3 additional ML LiveView screens with individual Overlay presets.

//Submenu options://

**OFF (1)**

**2**

**3**

**4**

This menu item sets the number of available ML LiveView screens. Default setting 
is OFF (1), enabling only a single ML LiveView screen.
To change the current preset, press INFO/DISP in LiveView, or [Q] on the GlobalDraw
entry in the Overlay menu. On the top bar, you will see DISP 0, 1, 2 or
3. Each of those is a preset for the settings in Overlay menu. So you
can, for example, configure DISP 1 with false colors, DISP 2 with zebras
and focus peaking, and DISP 3 with clear display.

Caveat: After enabling additional ML screens DISP/INFO button will toggle between ML liveview screens only! You can access a single Canon liveview screen by pressing Q but you can no longer switch to other Canon liveview screens.


==== Lens Info Prefs ====

//Submenu options://

** Crop Factor Display **

If enabled, ML bottom bar will display the 35mm equivalent focal length, including crop factor (1.6x).

For example, a 50mm lens at f1.8 will be displayed as:
  * 50mm f/1.8 with this option disabled.
  * 80eq f/1.8 with this option enabled.

**Focus Distance Units** Choose between metric and imperial measurements for focal distance.





==== Customize Menus ====
> Ready for review
Creating "MyMenu" screen for ML settings. 
You can select menu items of your choice. 

Activate browsing by pressing SET. Bar colour will change from blue to dark orange, same colour as bottom line and tab (screen) name. Browse to the item you want to select for ML's MyMenu screen and press SET once. Green star icon shows selected items. Press SET twice to hide menu items in ML screens (<color #ed1c24>x</color>). Pressing SET a third time will deactivate selection.
After selection completed go back to Prefs screen -> Customize Menus and press SET again to deactivate browsing. Colours will change back to default.

All items marked for MyMenu (green star icon) will be displayed in screen MyMenu and are accessible from here, too. 
If you access a screen with hidden items you will see a text "Hidden:..."(in orange color) indicating what items are hidden.

MyMenu will work together with Config Presets and are configurable individually for each config preset.
MyMenu settings are stored in ML\Settings (and associated config preset subdirectories). File name is MENU.CFG. If you got totally lost you may want to delete MENU.CFG to go back to default menu structure.

//Submenu options://

===== Scripts =====

Only visible after loading lua.mo in Modules tab

//Submenu options://

==== Script API tests ====
==== Text Editor ====
==== Calculator ====
==== Hello, World! ====

===== Games =====

Only visible after loading arkonoid.mo and/or loading lua.mo

//Submenu options:// 
==== Arkanoid ====
==== Sokoban ====
==== Pong ====





===== Modules =====

(http://www.magiclantern.fm/forum/index.php?board=52.0)

Modules are one of the great things about ML and they tend to just appear out
of nowhere (nowhere = years of programming skills). Forum member
Audionut put together a resource for compiling your own if you are upto
it: [[http://www.magiclantern.fm/forum/index.php?topic=9517.0|creating your own modules]] or
[[http://www.magiclantern.fm/forum/index.php?topic=11334.0|creating your own modules 2]]

Remark: LUA script language is another approach to lower the bar for creating own enhancements for ML. LUA scripting is considered to be easier to learn and develop (no compiling needed) but is restricted to things implemented in LUA API. Modules don't have this limitation.

The modules listed in this section are included in the nightly builds. For other modules see [[#Modules (other)]]

> For discussion: AFAIK modules tab is the only screen where help texts are included in code. And - besides activating and deactivating - additional help texts including submenu descriptions serve no purpose here. So: What are we actually doing here? Help texts and listings of submenu items are needed where the menu items are. Wrong?
> No response. Cleanup in progress! Done!

==== adv_int.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=8431.0)

Intervalometer Ramping Module. Module menu will pop-up in Shoot screen/tab under [[#Intervalometer]] -> Ramping Options

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/adv_int/README.rst|adv_int.mo readme file on Heptapod]]


==== arkanoid.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=7847.msg106815#msg106815)

Now you can work on your paddle skills on the move. +1 for Tetris.
Will pop-up in [[#Games]] screen/tab -> [[#Arkanoid]]

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/arkanoid/README.rst|arkanoid.mo readme file on Heptapod]]

==== autoexpo.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=7208.0)

Another Pravdomil gem that gives you automatic control of your exposure during a take.
Well pop-up in [[#Expo]] screen/tab -> [[#Auto exposure]]

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/autoexpo/README.rst|autoexpo.mo readme file on Heptapod]]

==== bench.mo ====

Various benchmarks to determine card and camera performance.
Will pop-up in [[#Debug]] screen/tab -> Benchmarks


==== deflick.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=10496.0)

Will pop-up in [[#Shoot]] -> [[#Post Deflicker]]

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/deflick/README.rst|deflick.mo readme file on Heptapod]]

==== dot_tune.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=4648.0)

DotTune AFMA.
Will pop-up in [[#Shoot]] screen/tab -> [[#DotTune AFMA]]

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/dot_tune/README.rst|dot_tune.mo readme file on Heptapod]]

==== dual_iso.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=7139.0)

Dual ISO - massive dynamic range improvement.
Will pop-up in [[#Expo]] screen/tab -> [[#Dual ISO]]

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/dual_iso/README.rst|dual_iso.mo readme file on Heptapod]]

==== edmac.mo ====

Developer tool. If you are a "normal" user you most likely will never have to use it.
Will pop-up in [[#Debug]] screen/tab -> [[#EDMAC tools]]


==== ettr.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=5200.0)

Auto ETTR based on RAW histogram.
Will pop-up in [[#Expo]] screen/tab -> [[#Auto ETTR]]

[[http://www.magiclantern.fm/forum/index.php?topic=5693.0|(Auto) ETTR (Exposure to the Right): -- History & Beginners Guide]]

[[http://www.magiclantern.fm/forum/index.php?topic=5705.0|Flicker Free ETTR Timelapse: -- Beginners Guide & Basic Post Processing --]]

[[http://www.magiclantern.fm/forum/index.php?topic=8322.0|AETTR + DUAL ISO: The Ultimate Automated Perfect Image Exposure]]

[[http://www.magiclantern.fm/forum/index.php?topic=8443.0|ETTR + DUAL ISO = 14 Stop Dynamic Range Timelapse - Postprocessing Guide]]

[[http://www.magiclantern.fm/forum/index.php?topic=7835.0|Dual ISO vs Auto ETTR]]

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/ettr/README.rst|ettr.mo readme file on Heptapod]]

==== file_man.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=5522.0)

Port CHDK file browser.
Will pop-up in [[#Debug]] screen/tab -> [[#File Manager]]

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/file_man/README.rst|file_man.mo readme file on Heptapod]]

==== lua.mo ====

LUA module has no interface of its own. It will browse ML\scripts directory for files with .lua extensions and show them in [[#Scripts]] screen/tab (default) or in other screens/tabs as defined in those LUA files. Example: [[#Sokoban]] and [[#Pong]] will appear in [[#Games]] screen/tab.

> Missing: Credits, links.

==== mlv_lite.mo ====
(https://www.magiclantern.fm/forum/index.php?topic=16650.0)

Magic Lantern (RAW) Video format v1.1.
Will pop-up in [[#Movie]] -> [[#RAW video]] (without suffix "MLV")


Raw video has come a long way in a year [[http://www.magiclantern.fm/forum/index.php?topic=11243.0|2014: NEW Current Raw Capabilities]].

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/mlv_lite/README.rst|mlv_lite.mo readme file on Heptapod]]

==== mlv_play.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=7122.0)

MLV play has no interface of its own. 
It works two ways: \\
Instant playback after MLV recording.\\ 
Playing MLV recordings via [[#File Manager]]. But don't expect realtime playback!\\

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/mlv_play/README.rst|mlv_play.mo readme file on Heptapod]]

==== mlv_rec.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=7122.0)

Magic Lantern (RAW) Video format v2.0.\\ 
Will pop-up in [[#Movie]] screen/tab -> [[#RAW video (MLV)]]

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/mlv_rec/README.rst|mlv_rec.mo readme file on Heptapod]]


==== mlv_snd.mo ====

Will pop-up in [[#Audio]] screen/tab -> [[#MLV Sound]]

This module requires module MLV_REC.mo to load.

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/mlv_snd/README.rst|mlv_snd.mo readme file on Heptapod]]



==== pic_view.mo ====

Picture Viewer module has no menu of its own. It will merge into [[#File Manager]] (if loaded).

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/pic_view/README.rst|pic_view.mo readme file on Heptapod]]

==== selftest.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=5240.0)

Self-testing routines
Developer tool. If you are a "normal" user you most likely will never have to use it.\\ 
Will pop-up in [[#Debug]] screen/tab -> [[#Self tests]]

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/selftest/README.rst|selftest.mo readme file on Heptapod]]

==== silent.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=5240.0)

14bit RAW DNG silent pics!
Will pop-up in [[#Shoot]] screen/tab -> [[#Silent Pics]]

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/silent/README.rst|silent.mo readme file on Heptapod]]

===== Debug =====

Functions for troubleshooting and development. 
Most likely you (presumptively a non-developer) will have no reason to access this screen using ML. Exceptions:
  * Benchmarking your flash card. 
          * Recommended to run this at least once for a new card. Helps you to determine card's performance when used in cam and to detect fraudulent cards.
  * Using ML's File Manager 
          * Basic file manipulation (copy, move, delete) 
          * View files not supported by Canon itself (DNG, raw video formats, text files)
  * Checking shutter count
  * Checking cam temperature
  * In case of misbehaving cam, you may be asked to run some diagnostics. Assisted by a developer, of course!


==== Modules debug ====



//Submenu options://

**Disable all modules**

**Load modules after crash**

By default (OFF) ML modules will not be loaded after a crash or after battery pull during operation. Users and developers may find setting OFF helpful to identify and disable misbehaving modules in the field. 
For unattended cameras in remote locations setting "Load modules after crash ON" might be preferable esp. if used together with some kind of watchdog timer or otherwise intermittent power source. Same for situations under stress where having time for troubleshooting is not an option.

**Show console**

==== Benchmarks ====

Card interface performance and other (more nerdy) tests. 

Only visible after loading Bench.mo in Module screen.

Completed benchmark runs will save results as PPM files (Portable Pixmap) to card's root directoy. File naming will be BENCHx.PPM with consecutive numbers whenever a benchmark is taken. You can convert PPM to PNG/JPEG (using your PC )if you want to share results in ML forum (for example).

> INCOMPLETE 

//Submenu options://

**Card benchmarks**
    * Quick R/W benchmark (1 min)
      
      To determine read and write performance of your card/camera combination. 
        * There will be two consecutive R/W runs. It will tell you if/how heating up the card affects card performance.
        * Benchmark runs in photo/stills and movie mode may differ quite a bit. In photo mode numbers are higher because benchmark will surpress most of ML code during benchmark run.  Therefore numbers in photo mode are close to limits of card/cam combination without overhead caused by ML. Benchmark runs in movie mode are closer to reality (when recording). \\ BTW: Another kind of benchmark will be shown in footer lines of movie tab inside MLV menu. Those numbers are processed by the MLV module itself. Take this calculation with a grain of salt.
        * Numbers will be shown in MByte/s. 1 MByte = 1024 kByte =1024*1024 Byte
        * Make sure to have sufficient free space for temporary benchmark files (> 1 GB). ML does not check this condition resulting in stunning high (but false) numbers if free space runs out.
        
      Theoretical interface limits and photo benchmark numbers (R/W) to expect. (MByte/s, without overclocking)
        * 100D: 50; xx/xx
        * 1100D: xx; xx/xx
        * 5D2: 100; xx/xx
        * 5D3: 25; xx/xx (SD)
        * 5D3: 166; xx/xx (CF)
        * 50D: 100; xx/xx
        * 500D, 550D, 600D: 25; xx/xx
        * 6D: 50; xx/xx
        * 60D: 25; xx/xx
        * 7D: 133; xx/xx
        * 70D: 50; xx/xx
        * M, 650D, 700D: 50; xx/xx


    * Buffer R/W benchmark (5 min)
    * Buffer write benchmark (inf)

**Memory benchmarks**
   * Memory benchmark (1 min)
   * Cache benchmark (RAM)
   * Cache benchmark (RAM, no cache)
   * Cache benchmark (ROM)

**Misc benchmarks**
    * Focus peaking benchmark (30s)
    * Menu benchmark (10s)

==== EDMAC tools ====
**Show EDMAC channels**

**Find free EDMAC channels**

**Log EDMAC activity**
    * Start logging
    * Log every
**EDMAC model test**

==== File Manager ====

//Submenu options://

Allows you to browse your storage medium and do basic file manipulations.
Only visible after loading file_man.mo in Modules screen tab.

  * Show file attributes: Timestamp and file size.
  * View plain text files contents (logs, LUA scripts, Readme, ...)
  * View PPM files (generated by ML's snapshot and benchmark features) (Requires module pic_view.mo to be loaded)
  * View raw video files (Requires module mlv_play to be loaded)
  * Copy all types of files (but not directories).
  * Move all types of files (but not directories).
  * Delete all types of files (but not directories).

  * Select files in a directory based on file extension. (*.LOG, *.JPG, ...) and copy, move or delete them.

==== Self tests ====

Only visible (together with "Fault emulation") after loading selftest.mo in Modules tab.

**Stubs API test**

**RPC reliability tests (infinite)**

**Quick test (around 15 min)**

**Random tests (infinte loop)**

**Menu backend test (infinite)**

**Redraw test (infinite)**

**Rectangle test (infinite)**

**SRM memory test (5 minutes)**

**Small-block malloc test (quick)**

**Memory leak test (1 minute)**

**EDMAC screen test (infinite)**


==== Fault emulation ====

Only visible (together with "Self tests") after loading selftest.mo in Modules tab.

**Create a stuck task**

**Freeze the GUI task**

**Lock-up the ARM CPU**

**Division by zero**

**AllocateMemory 1MB**

**Allocate 10MB of RAM**

==== Lens info ====
**Name**

**Focal len**

**Lens ID**

**Serial num**

**Version**

**Capability**

**Extender**


==== Screenshot - 10 s ====

//Submenu options://

Print screen after 10 seconds. The card LED will blink every second, until the screenshot is taken.
This option saves a PPM file (Portable Pixmap) to card's root directoy. File naming will be VRAM0.PPM with consecutive numbers whenever a screenshot is taken. The PPM does not contain transparency data. You can convert PPM to PNG/JPEG if you want to illustrate your problem in a forum request.






==== Dump ROM and RAM ====

//Submenu options://

==== Dump image buffers ====

//Submenu options://

==== Don't click me! ====

This is a placeholder in one of ML's source files for customized/temporary debugging code. By default it is empty, doing nothing at all. If needed you (or more likely: a developer) can add code inside source which has to be compiled to a customized ML build to be executed by you.

//Submenu options://

Don't click it :)








==== Show tasks ====

//Submenu options://

Displays the tasks started by Canon and Magic Lantern.


==== Show CPU usage ====

//Submenu options://

**OFF**

**Percentage**

**Busy tasks (ABS)**

**Busy tasks (REL)**





==== Show GUI evts ====

//Submenu options://

**OFF**

**ON**

**ON - delay 300ms**




==== Free Memory ====

//Submenu options://

Displays the amount of available RAM.


==== Image buffers ====

//Submenu options://


==== Shutter Count ====

//Submenu options://

Displays the number of shutter actuations divided to "pics taken" + "Liveview actuations". 
A liveview session will increment "Liveview actuations" by 1. Each pic taken in a liveview session will increment "pics taken" *and* "Liveview actuations".
Therefore a single still picture taken in Liveview will add 1 to "pics taken and 2 to "Liveview actuations".

Numbers will not get updated until next startup. 


==== Internal Temp ====

//Submenu options://

Displays internal temperature, in Celsius, Fahrenheit and some Canon-specific unit called "raw" (not to be confused with image data format).
ML reads cam's value for "efic_temp" which can a little bit different from value found in image's exif data.

Internal Temp will be shown in ML liveview screen, too. Celsius value only!
==== Battery level ====

//Submenu options://

Displays battery percentage, estimated time remaining and battery discharging rate.
For accurate readings, wait until the percentage indicator decreases by at least 2% since powering on.

Remarks: 
There had been several complaints about ML draining batteries. Down to this day all of these claims could either be broken down to user errors (improper card handling, activating ML features affecting powersave mode, ...) or were not reproducable at all. Avoid improper camera shutdown and - most important - never remove card during shutdown or immediately after opening card door.
For those who want to play it absolutely safe: Remove battery after shutdown.

ML being active does however cost some energy thus reducing battery life a bit.










===== Help =====

In-camera help section.


==== Press INFO ====

//Submenu options://

==== Press Q ====

//Submenu options://



==== SET/PLAY ====

//Submenu options://

==== Zoomin ====

//Submenu options://

==== Press MENU ====

//Submenu options://

==== Press PicStyle ====

//Submenu options://

==== Key Shortcuts ====

//Submenu options://

==== Complete user guide ====

//Submenu options://

==== About Magic Lantern ====

//Submenu options://

===== MyMenu =====

Only visible after enabled via [[#Customize Menus]]

===== Modified =====

Only visible after changing ML settings\\
Contains all changed settings and allows quick access to them.

//Submenu options://



===== Modules (other) =====
Modules by developers/members, not available in the nightly builds

> Didn't check it

==== astro.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=18515.0)

Astrophotography module, offers star focusing help, azimuth polar alignment and a dark red theme

//Submenu options://

==== auto_iso.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=8688.0)

Auto ISO with some tweaks to it's functionality, including EC in M.
Not currently available.

//Submenu options://

==== bolt_rec.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=6303.0)

Bolt trigger module test results.

//Submenu options://

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/bolt_rec/README.rst|bolt_rec.mo readme file on Heptapod]]

==== foc_inf.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=7189.0)

Focus Infinity Module.

//Submenu options://

==== gps.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=11209.0)

GPS information from your camera, 6D only right now.

//Submenu options://


==== ime_base.mo ime_rot.mo ime_std.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=6899.0)

IME (Text Input) System - first version.

//Submenu options://

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/ime_base/README.rst|ime_base.mo readme file on Heptapod]]
[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/ime_rot/README.rst|ime_rot.mo readme file on Heptapod]]
[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/ime_std/README.rst|ime_std.mo readme file on Heptapod]]

==== io_crypt.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=10279.0)

io_crypt is a module which automatically encrypts .CR2 and .JPG while you shoot them.

//Submenu options://

[[https://foss.heptapod.net/magic-lantern/magic-lantern/-/blob/branch/unified/modules/io_crypt/README.rst|io_crypt.mo readme file on Heptapod]]

==== sen_cle.mo ====
(http://www.magiclantern.fm/forum/index.php?topic=8217.0)

Sensor cleaning module.

//Submenu options://

===== Abbrevations =====
AGC: Automatic gain control.\\
ALO: Canon's Auto Light Optimizer.\\
APEX: Additive System of Photographic Exposure, used to indicate relative aperture and shutter speed as well as to symbolize aperture priority and shutter priority modes.\\
BV: Brightness Value\\
CBR: Constant Bit Rate.\\
D4, D5: Used in ML forums for DiGiC 4 and 5 image processors. \\
dB: Decibels, a logarithmic measure of a sound level.\\
DFF: Deep Focus Fusion -> Focus Stacking.\\
DNG: Digital Negative, an open raw data format invented by Adobe.\\
EC\\
ETTR: Exposing to the right. Intentionally overexposing (but not blowing out) to maximize image quality.\\
EV: Exposure Value.\\
EXIF: Exchangeable image file format. Method of storing metadata (exposure, aperture, ISO, ...) into image file.\\
fps: Frames per second.\\
FRSP: Full resolution Silent Picture. ML's technique taking pics covering full sensor area without shutter and mirror actuation.\\
ISO\\
Luma: Video term used for brightness.\\
MLV: Magic Lantern Video format. ML's own raw format which comes in two flavours: 2.0 (mlv_rec.mo) and 2.1 MLV Lite (mlv_lite.mo).\\
VBR: Variable Bit Rate.\\
XLR\\
YUV: Color encoding combining luma/brightness (Y) and chrominance (UV) components. (UV does not mean "ultraviolett" but stands for axis U and V of the U-V color plane.)\\



===== Obsolete? =====
Parking lot for items lost in transition

==== Rack Delay ====
> OBSOLETE?

Sets the number of seconds before starting a rack focus.

//Submenu options://

This lets you film the start point first, then initialise the rack focus without touching the camera.

==== Focus ... ====
Recommended focus step settings:
Focus StepSize: 1 or 2
Focus StepDelay: small values, without Wait flag.
If the motion is not smooth, try larger delays (100ms)

Quick rack focus while recording:

Press MENU to save current focus point (this means I want to return here);
Use follow focus to change focus point (focus somewhere else);
Press PLAY to go to saved focus point;
Press PLAY again to go back.

==== Rack Focus ====
> Explanation belongs in "Focus End Point"

Step-by-step:

Pick the end point of rack focus by focusing on it (manually or with AF).
Configure focus parameters (step size and delay). Different lenses may
require different parameters. Open the Focus menu, go to Focus End Point
and press Set to zero it out. Pick the start point by focusing on it
with the LEFT/RIGHT buttons while the Focus menu is active. Make sure
the number from Focus End Point is changing as you focus. Fine-tune the
position with scrollwheel. Go to Rack Focus and press SET or PLAY to
start rack focus. To return to the starting point, run rack focus again.
Tip: when LCDsensor Remote is set on Near or Away, you can trigger rack
focus from the LCD sensor, avoiding camera shake.

Recommended focus step settings (menu item "Focus Settings"):

Step Size: 1 or 2

Step Delay: - without Wait flag: large delays (around 100 ms) ? will
ignore small position errors - with Wait flag: small delays (only lens
is in very good mechanical condition)



==== Bulb/Focus Ramping ====

> INCOMPLETE
> OBSOLETE Whole section is no longer represented in Shoot menu. IMO this should be replaced by a proper description for Advanced Intervalometer.

Bulb Ramping allows the capture of a timelapse that gradually changes
exposure, compensating for the transition from day to night.

//Submenu options://

Auto exposure ramping: this option will adjust shutter and ISO automatically, by looking at image brightness of previous shots.

Manual exposure ramping: this option will adjust shutter and ISO to follow a
fixed exposure ramp (a fixed amount of EV change per shot). Can be used
as standalone or combined with auto ramping.

Manual focus
ramping: this lets you adjust focus gradually while shooting the
timelapse. It requires a lens with autofocus and it can only work in
LiveView.

Settings for auto ramping:

Mode: sunset /
sunrise / auto. In sunset mode, the exposure will always increase. In
sunrise mode, the exposure will always decrease. This idea was suggested
by Tom Lowe on RedUser.net forum.

Maximum ramping speed: this
parameter is used for computing the optimal smoothness factor. A lower
value will reduce flicker, but if the value is twice as low as the real
rate of brightness change, ML will lose the ability to ramp correctly.
For example, if you set a maximum ramping speed of 0.1 EV / shot, and
the scene requires a ramping of 0.2 EV / shot, ML will start flickering
heavily.

Quick start guide for auto ramping:

1. Take a picture of your scene. You will use it to say: I want my timelapse to be exposed like this picture.

2. Enable Bulb Ramping and Intervalometer.

3. Leave the camera still while ML runs a calibration step:

Make sure you have a static and well-lit scene (any static scene which does not require long exposure should be fine).

After calibration, you should get a nice S-curve on the screen.

4. Now you will have to say what tone range to meter for (i.e. highlights, midtones…). Follow the wizard:

Use arrow keys to select your reference picture (which you just took).

Use the main dial to select the tone range to meter for. You can't
perfectly match two images just by varying one parameter (exposure), so
you have to choose what's important for you in this picture.

For
lowest flicker, meter for midtones (choose the 50th percentile, i.e.
median, because it's a robust estimation, unlike simple averaging).
Leave some headroom for highlights (underexpose a bit).

If
highlights are important, meter for them (choose 80th percentile for
example). You will have to shoot RAW and remove flicker when you develop
the RAW files.
The algorithm works best when brightness is close to 50% (try not to choose extreme values for it).
When you are ready to start, press SET.
5. Sit back and relax :)
Limits:
ISO is chosen between 100 and maximum auto ISO value from Canon menu.
Shutter speed is chosen between 1/8000 (lower limit) and the delay between two
shots minus two seconds (upper limit). Example: for 10-second intervals,
shutter speed will be between 1/8000 and 8 seconds.
Aperture is fixed (you can change it manually).
Tips:
Don't adjust ISO and shutter before the timelapse, they are fully automatic.
Use a ND filter to reduce flicker during daylight.
Reduce flicker in post. We recommend VirtualDub with MSU Deflicker plugin
(free, works with Windows and Wine). See also Timelapse workflow using
free software tutorial.
Technical notes:

Exposure is metered using a condition like this (for example): 70% of pixels should be below 50% brightness.

Exposure for every shot is computed from previous shots, using a feedback controller algorithm with a smoothing factor.

ISO is chosen using the 180 degree rule, so the resulting shutter speed
stays between 90 and 270 degrees (that is, between 1/4 and 3/4 of the
delay between two shots).

Only full-stop ISOs (100, 200, 400 etc) are used (because you are supposed to shoot RAW).

Shutter speed can be adjusted with a resolution of 10ms.
Frames with fast shutter speeds (less than 1 second in Rebel cameras, less 0.1
seconds in 60D) are taken in Manual mode. You will get flicker.
It can go from 1/8000s @ ISO 100 (daylight) to several minutes of exposure time @ ISO 6400 (complete darkness).

Exposure algorithm is a feedback controller designed with pole placement - the
closed loop response will have two real poles placed at the smoothing
factor value. Smoothing factor is computed in such a way that, when
scene ramping speed matches the speed selected in menu, ramp is followed
at exactly 1 EV behind it. If the lighting changes suddenly a few stops
between two shots (for example, you change the ND filters or the
aperture), the algorithm should recover completely after 2 or 3 shots. A
sudden exposure change is considered when the exposure difference is
greater than 2 stops.

Logging: When you use bulb ramping, Magic
Lantern will save a log file with the exposure parameters, metered
values and so on. Please send this file to developers. These log files
can be used to see how well the ramping went and to fine-tune the
algorithm.

** Focus/Focus Stacking **

This function can also create scripts named like named FST_1234.SH, which can
be used for stacking the images with enfuse. See Exposure bracketing
for details on how to use these scripts, and the focus stacking section
from Enfuse reference manual. To enable (or disable) the post-processing
scripts, go to <del>HDR bracketing</del> Shoot -> Shoot Preferences submenu.


You can also combine this function with HDR bracketing and silent pictures.

** RAW video (MLV)**

> Still there? **Fix black level** Forces the black level to 2048 to combat green shadows.


** Silent Pics **
Outdated, redo here, then up again
> Outdated 
When enabled, it saves uncompressed YUV422 frames from the LiveView image
buffer when you press the shutter halfway. Make sure you don't have
autofocus assigned to half-shutter press (put it on * or turn it off)
Images are saved in DCIM/1xxCANON/ after the following rules:


>Outdated 
If intervalometer is OFF, silent pics are named after last picture/movie
taken without this function (e.g. 12340001.422). You are limited to
10000 silent pictures for each noisy picture.

If intervalometer
is ON, silent pics have names like 12345678.422. Tip: use File Numbering
? Manual Reset from Canon menu to increase folder number (to sort them
easier).

To convert a 422 image to JPEG on the PC, use one of the following programs:

422-jpg.py (command-line tool, runs on all platforms, you need to install Python, PIL and numpy).

422toimage (Windows only, source code available).

YUV422 Convertor (Windows only, closed source).

> OBSOLETE? Silent Pic Hi-Res:
emulates high-resolution by taking a matrix of small silent pics, in
zoom x5 mode. You need to have the camera on a tripod and the subject
should be static (a picture is taken in a few seconds). Could be useful
for focus stacking or for timelapse without increasing shutter count.

** Auto BurstPicQuality **

> OBSOLETE?

When enabled, it will temporarily reduce picture quality in burst mode in
order to maintain a decent frame rate even when the buffer becomes
almost full.

//Submenu options://

This function will reduce picture quality if the buffer has space for less than 4 pictures:
  * RAW+JPG ? JPG Large Fine ? JPG Medium Fine
  * RAW ? JPG Large Fine ? JPG Medium Fine
  * JPG Large Coarse ? JPG Medium CoarsePossible results (550D, Transcend Class 10, your mileage may vary):
  * RAW+JPG, JPG-L, all others JPG-M
  * RAW, RAW, all others JPG-M